Cart
← Back to Product Catalog

Monacor – PA-900DT

Amplifiers

More details

Similar Products

duran-audio-industryamp-PB-800-dn|duran-audio-industryamp-PB-800-dn
  • Duran Audio

Duran Audio – IndustryAmp PB-800-DN

The PB-800-DN Industry amplifier is an ultra-reliable, high-power, 8 channel (100W per channel) audio power amplifier designed for use in critical systems.  The PB-800-DN Industry amplifier is an ultra-reliable, high-power, 8 channel (100W per channel) audio power amplifier designed for use in critical systems. It is designed to drive 100 V line loudspeaker systems and is equipped with on-board DSP allowing gain, EQ, delay and other parameters to be controlled from a remote location using WinControl software, via DANTE™. The amplifiers are fully monitored, with automatic fault detection and reporting. Inputs may be either balanced analogue audio or digital audio DANTE™. When used in conjunction with Duran Audio’s OpSTImizer® service the PB amplifiers can provide significant improvements in speech intelligibility within a tunnel.
    Amplifiers
See the product
Ashly_-_nXp_1502|Ashly_-_nXp_1502
  • Ashly Audio

Ashly – nXp1502d

Features:
  • nXp Series available in either 2 or 4-channel models.
  • Use rear panel DIP switches to program each channel output for either High-Z (70V or 100V Constant Voltage) or Low-Z (stable down to 2 Ohms) operation.
  • When in Sleep Mode, the nX amplifiers draw less than 1 Watt.
  • They are the networkable version of the nX amplifier with the addition of Ethernet control, serial data control, aux preamp outputs, instant standby mode, preset recall, fault condition logic outputs, and optional network audio and digital audio capability.
  • Has 32-bit SHARC DSP processing (with 48kHz & 96kHz sampling) as standard equipment for comprehensive audio processing, with built-in signal generator for test tone, and noise-masking.
  • Precision load impedance monitoring on each amplifier channel output. All controlled using our proprietary Protea™ Software Suite.
    Amplifiers
See the product
KE_Audio_-_KE1000B_0|KE_Audio_-_KE1000B_0
  • KE Audio

KE Audio – KE1600A

“KE” intelligent power amplifier built-in DSP has: high performance double 32 - bit audio dedicated floating-point processor, high performance A/D, D/A converter. Each channel has 5 parametric equalizer, all parameters are adjustable. Multiple frequency division mode, 6db, 12db, 24db or 48db NingKe. Each channel has its own latency, maximum 80 ms and 0.1 ms delay interval. Each channel is independent of compressors and limiter, all parameters can be adjusted; Function of phase inversion, digital noise gate. 30 users memory, intuitive and friendly computer interface, RJ45 interface, Channel Copy function, convenient debugging KE1600A is a two channel intelligent power amplifier. “KE” intelligent power amplifier built-in DSP has: high performance double 32 - bit audio dedicated floating-point processor, high performance A/D, D/A converter. Each channel has 5 parametric equalizer, all parameters are adjustable. Multiple frequency division mode, 6db, 12db, 24db or 48db NingKe. Each channel has its own latency, maximum 80 ms and 0.1 ms delay interval. Each channel is independent of compressors and limiter, all parameters can be adjusted; Function of phase inversion, digital noise gate. 30 users memory, intuitive and friendly computer interface, RJ45 interface, Channel Copy function, convenient debugging “KE” intelligent power supply of the power amplifier is quasi resonant full bridge topology, the high-frequency transformer magnetic core uses cutting-edge technology of nanomaterials. It has the advantage of high power efficiency, big power, and uses high power tube as the full bridge switch tube, the power of the internal resistance is low. It can provide high current moment to load.
    Amplifiers
See the product