Dante-enabled Product Catalog

The nXp3.04d is a 4 channel multi-mode amplifier capable of driving 2 Ohm loads at full power. The maximum rated output power is 3,000W per channel at Low Z, 2,450W per channel in 70V mode, and 1,250W in 100V mode. There is an automatic but defeatable sleep mode consuming <1W, and instant standby mode controlled by contact closure or software. A switch mode power supply auto-detects 120VAC or 240VAC mains, and a Neutrik® powerCON is used for the AC cord. Each channel has selectable output mode of Low Z, 70V, or 100V, an 80Hz high-pass filter, input limiter, and input gain settings of 26dB, 32dB, 38dB, or 1.4V. Each channel has remote DC level control. Input connectors are Neutrik® XLR/TRS combo jack and Euroblock, while output connectors are Neutrik® speakON. The unit has a front panel power switch and level controls that can be disabled. LEDs indicate Protect, Sleep, Disabled, Com, and Bridge mode status, as well as Temperature, Output Current, Output Signal, and Clipping/Mute status per channel. The unit has Ethernet control with a real-time clock for event scheduling. The unit has serial data remote control, aux preamp outputs, preset control, fault condition logic outputs, optional network audio and AES3 digital audio capability. The unit has 32-bit DSP processing at 48kHz or 96kHz sampling rate. DSP functions include swept load impedance, gain, dynamics including autoleveler and ambient noise compensation, equalization including graphic, parametric, feedback suppressor, and FIR filters, a matrix mixer including automixing, crossover, delay, and a signal generator. The amplifier has temperature dependent variable speed forced-air cooling.

Ashly's Pema™ is an energy efficient, Class-D amplifier topology with a switching power supply and full matrix mixer, translates to 80% energy efficient out of the box. The pema4125 is a 4-Channel @ 125 Watts per channel and ships with Ashly’s full Protea™ suite of DSP.

The pema4125d is also available in these models:

pema 4125.70d - pema Network Power Amp 4 x 125W @ 70V Constant Voltage w/ 8x8 Protea DSP. Includes OPDante Card

pema 4125.10d - pema Network Power Amp 4 x 125W @ 100V Constant Voltage w/ 8x8 Protea DSP. Includes OPDante Card

Ashly's Pema™ is an energy efficient, Class-D amplifier topology with a switching power supply and full matrix mixer, translates to 80% energy efficient out of the box. The pema4250 is a 4-Channel @ 250 Watts per channel and ships with Ashly’s full Protea™ suite of DSP.

The pema4250d is also available in these models:

pema 4250.25d - pema Network Power Amp 4 x 250W @ 25V with 8x8 Protea DSP. Includes OPDante Card

pema 4250.70d - pema Network Power Amp 4 x 250W @ 70V with 8x8 Protea DSP. Includes OPDante Card

pema 4250.10d - pema Network Power Amp 4 x 250W @ 100V with 8x8 Protea DSP. Includes OPDante Card

Ashly's Pema™ is an energy efficient, Class-D amplifier topology with a switching power supply and full matrix mixer, translates to 80% energy efficient out of the box. The pema8125 is a 8-Channel @ 125 Watts per channel and ships with Ashly’s full Protea™ suite of DSP.

The pema8125d is also available in these models:

pema 8125.70d - pema Network Power Amp 8 x 125W @ 70V Constant Voltage w/ 8x8 Protea DSP. Includes OPDante Card

pema 8125.10d - pema Network Power Amp 8 x 125W @ 100V Constant Voltage w/ 8x8 Protea DSP. Includes OPDante Card

Ashly's Pema™ is an energy efficient, Class-D amplifier topology with a switching power supply and full matrix mixer, translates to 80% energy efficient out of the box. The pema8250 is a 8-Channel @ 250 Watts per channel and ships with Ashly’s full Protea™ suite of DSP.

The pema8250 is also available in these models:

pema 8250.25d - pema Network Power Amp 8 x 250W @ 25V with 8x8 Protea DSP. Includes OPDante Card

pema 8250.70d - pema Network Power Amp 8 x 250W @ 70V with 8x8 Protea DSP. Includes OPDante Card

pema 8250.10d - pema Network Power Amp 8 x 250W @ 100V with 8x8 Protea DSP. Includes OPDante Card

The BB-88DT is a BlueBridge DSP audio processor featuring a 8 Input and 8 Output configuration with Dante™ that features powerful and flexible tools offering mission critical solutions to satisfy the exact needs of any installation.

The BB-168DT is a BlueBridge DSP audio processor featuring a 16 Input and 8 Output configuration with Dante™ that features powerful and flexible tools offering mission critical solutions to satisfy the exact needs of any installation.

The BB-816DT is a BlueBridge DSP audio processor featuring a 8 Input and 16 Output configuration with Dante™ that features powerful and flexible tools offering mission critical solutions to satisfy the exact needs of any installation.

The BB-1616DT is a BlueBridge DSP audio processor featuring a 16 Input and 16 Output configuration with Dante™ that features powerful and flexible tools offering mission critical solutions to satisfy the exact needs of any installation.

The BB-EB1616DT can be incorporated into any BlueBridge system as an I/O expander or it can be used as a standalone digital snake on networks featuring Dante™.

The unDX2IO+ Dante™ Audio Interface is a cost effective multi‐IO wall box to add up to two channels (in and out) of Dante audio to an existing Dante-based networked audio system.. The unDX2IO features XLR balanced audio inputs and outputs, switchable mic/line gain and switchable phantom power on the inputs. An additional 2 Balanced line inputs are accessible on side of unit for use with a companion unXP2I passive expansion plate. All inputs and outputs can be used simultaneously and all audio channels are available separately. The unDX2IO+ is designed to fit into most dual gang US junction boxes and is PoE enabled, so all connectivity (power and data) is provided by a single CAT5 cable. CONTROL - Audio flow assignment, input gain and phantom power are all controllable via the Dante network connection. The unDX2IO+ replaces the legacy unDX2IO.

AuviTran Audio ToolBox is a modular audio platform giving access to a large variety of professional audio networked configurations. With 3 or 7 slots, AVBx3 and AVBx7 can convert microphone, line in, line out, AES EBU, ADAT, MADI, EtherSound or CobraNet to DANTE. The AVBx3 and AVBx7 can be mounted in Installation or Touring mode for front or rear panel connectors. AVBx7 embed a built in 1024x1024 digital routing matrix. Accessories such as redundant power supplies, Switch card with Fiber connectors, 128 channels Sample Rate Converter or GPIOs can be added to extend the ToolBox Solution.

AuviTran Audio ToolBox is a modular audio platform giving access to a large variety of professional audio networked configurations. With 3 or 7 slots, AVBx3 and AVBx7 can convert microphone, line in, line out, AES EBU, ADAT, MADI, EtherSound or CobraNet to DANTE. The AVBx3 and AVBx7 can be mounted in Installation or Touring mode for front or rear panel connectors. AVBx7 embed a built in 1024x1024 digital routing matrix. Accessories such as redundant power supplies, Switch card with Fiber connectors, 128 channels Sample Rate Converter or GPIOs can be added to extend the ToolBox Solution.

AuviTran Audio ToolBox is a modular audio platform giving access to a large variety of professional audio networked configurations.

The D800-Dante A-Net Distributor provides seamless connectivity between a Dante audio network and Aviom Personal Mixers, including the A-16II and new A360.

The Bose® ControlSpace ESP-00 Series II engineered sound processor offers high-quality signal processing through a flexible I/O audio platform. Up to eight mixed analog and digital audio expansion cards (input and/or output), including Dante™ audio networking can be installed to create customized audio systems. Onboard connectivity includes Ethernet, RS-232, expandable GPIO, and support for elegant Bose control centers and volume controls.

The Bose® ControlSpace® ESP-880 engineered sound processor is a single-rack-space DSP with an 8x8 analog audio configuration, built-in 8-channel ESPLink digital output, and an open digital expansion slot ready to accommodate optional network audio cards including Dante™. This model meets today’s strict requirements for high-quality signal processing and control in a cost-effective package. The ESP-880 is designed for a wide variety of applications ranging from small self-contained projects to larger networked applications.

The Bose® ControlSpace® ESP-1240 engineered sound processor is a single-rack-space DSP with an 12x4 analog audio configuration, built-in 8-channel ESPLink digital output, and an open digital expansion slot ready to accommodate optional network audio cards including Dante™. This model meets today’s strict requirements for high-quality signal processing and control in a cost-effective package. The ESP-1240 is designed for a wide variety of applications ranging from small self-contained projects to larger networked applications.

The Bose® ControlSpace® ESP-4120 engineered sound processor is a single-rack-space DSP with an 4x12 analog audio configuration, built-in 8-channel ESPLink digital output, and an open digital expansion slot ready to accommodate optional network audio cards including Dante™. This model meets today’s strict requirements for high-quality signal processing and control in a cost-effective package. The ESP-4120 is designed for a wide variety of applications ranging from small self-contained projects to larger networked applications.

The Bose® PowerMatch PM4250 configurable professional power amplifier provides concert-quality sound with a high level of scalability and configurability for fixed installation sound reinforcement systems. Ethernet-equipped versions enable network configuration, control and monitoring, and an expansion slot supports input from optional digital audio accessory cards. PowerMatch amplifiers utilize numerous Bose technologies to deliver an unprecedented combination of performance, efficiency and ease of installation—all in a reliable, proprietary design.

The Bose® PowerMatch PM4500 configurable professional power amplifier provides concert-quality sound with a high level of scalability and configurability for fixed installation sound reinforcement systems. Ethernet-equipped versions enable network configuration, control and monitoring, and an expansion slot supports input from optional digital audio accessory cards. PowerMatch amplifiers utilize numerous Bose technologies to deliver an unprecedented combination of performance, efficiency and ease of installation—all in a reliable, proprietary design.

The Bose® PowerMatch PM8250 configurable professional power amplifier provides concert-quality sound with a high level of scalability and configurability for fixed installation sound reinforcement systems. Ethernet-equipped versions enable network configuration, control and monitoring, and an expansion slot supports input from optional digital audio accessory cards. PowerMatch amplifiers utilize numerous Bose technologies to deliver an unprecedented combination of performance, efficiency and ease of installation—all in a reliable, proprietary design.

The Bose® PowerMatch PM8500 configurable professional power amplifier provides concert-quality sound with a high level of scalability and configurability for fixed installation sound reinforcement systems. Ethernet-equipped versions enable network configuration, control and monitoring, and an expansion slot supports input from optional digital audio accessory cards. PowerMatch amplifiers utilize numerous Bose technologies to deliver an unprecedented combination of performance, efficiency and ease of installation—all in a reliable, proprietary design.

Formerly known as BLU-326 The Soundweb London BLU-326DA offers configurable I/O, Dante / AES67 audio, and a high bandwidth, fault tolerant digital audio bus. The BLU-326DA is configurable through HiQnet™ London Architect. A rich palette of logic objects and a “drag and drop” method of configuration provide a simple and familiar design environment. This processor features Dante / AES67 audio with primary and secondary ports for fault tolerance, with control through a separate Ethernet port. As well, the processor includes support for Dante 4.0 firmware for integration with Dante Domain Manager. The BLU-326DA also features a low latency, fault tolerant digital audio bus of 256 channels which uses standard Category 5e cabling giving a distance of 100m between compatible devices. Fiber optic media converters can be used to increase the distance between devices to over 40km. Four card slots which accommodate analog inputs, analog outputs, digital inputs and digital outputs in banks of four facilitate many different device I/O configurations. Analog Input Cards provide software configurable gain in 6dB steps up to +48dB per channel and software selectable Phantom Power per channel. Digital Input Cards and Digital Output Cards process AES/EBU and/or S/PDIF audio and offer a variety of clocking and syncing options. (Further information about the I/O cards can be found on dedicated datasheets) Phantom Power, Sync, Signal Present and Clip information per channel is easily accessible, without the requirement for a PC, from clear front panel LED indication. Device-specific information such as Device Name, Device Type, Firmware Version Number, Time, IP Address and Subnet Mask is available from the front panel display. A bi-directional locate function allows devices to be identified both from and within HiQnet London Architect. 12 Control Inputs and 6 Logic Outputs allow the BLU-326DA to be integrated with GPIO compatible devices. The Soundweb London Interface Kit, comprehensive documentation which details how Soundweb London systems can be integrated with third party control systems, is included within the installation of HiQnet London Architect. The BLU-326DA and the other members of the Soundweb London family provide the building blocks of the perfectly tailored system solution.

Formerly known as BLU-806 The Soundweb London BLU-806DA offers configurable I/O, configurable signal processing, Dante / AES67 audio and a high bandwidth, fault tolerant digital audio bus. The BLU-806DA has open architecture which is fully configurable through HiQnet™ London Architect. A rich palette of processing and logic objects and a “drag and drop” method of configuration provide a simple and familiar design environment. This processor features Dante / AES67 audio with primary and secondary ports for fault tolerance, with control through a separate Ethernet port. As well, the processor includes support for Dante 4.0 firmware for integration with Dante Domain Manager. The BLU-806DA also features a low latency, fault tolerant digital audio bus of 256 channels which uses standard Category 5e cabling giving a distance of 100m between compatible devices. Fiber optic media converters can be used to increase the distance between devices to over 40km. Four card slots facilitate many different device I/O configurations. Each slot can accommodate any of six available I/O cards, including the Analog Input Card, Analog Output Card, Digital Input Card, Digital Output Card, AEC Input Card, and Telephone Hybrid Card. Each card supports four channels. Analog Input Cards provide software configurable gain in 6dB steps up to +48dB per channel and software selectable Phantom Power per channel. Digital Input Cards and Digital Output Cards process AES/EBU and/or S/PDIF audio and offer a variety of clocking and syncing options. AEC Input Cards and Telephone Hybrid Cards facilitate specialized processing and interfacing primarily for teleconferencing applications. (Further information about the I/O cards can be found on dedicated datasheets) Phantom Power, Sync, Signal Present and Clip information per channel is easily accessible, without the requirement for a PC, from clear front panel LED indication. Device-specific information such as Device Name, Device Type, Firmware Version Number, Time, IP Address and Subnet Mask is available from the front panel display. A bi-directional locate function allows devices to be identified both from and within HiQnet London Architect. 12 Control Inputs and 6 Logic Outputs allow the BLU-806DA to be integrated with GPIO compatible devices. The Soundweb London Interface Kit, comprehensive documentation which details how Soundweb London systems can be integrated with third party control systems, is included within the installation of HiQnet London Architect. The BLU-806DA and the other members of the Soundweb London family provide the building blocks of the perfectly tailored system solution.

The DAD AX32 allows no-compromise audio recording, mastering, post production, and future-proof archiving A new feature is the inclusion of IP audio capabilities handling up to 512 channels on a 10 gigabit per second Ethernet link.

The oratis IF Dante module supports up to 64 bidirectional audio channels. It is fully compatible with Dante’s unique plug and play network integration with automatic device discovery and system configuration. The Ethernet switch incorporated on DELEC’s Dante board is one of the few on the market which already supports the IEEE 802.1BA AVB standard. Each IF Dante board is equipped with four Ethernet ports.