BR-108D digital audio processor is an audio processing and control system that can be designed freely. It uses advanced DSP processing technology, with new automatic mixing, feedback cancellation and other algorithms, to solve various practical problems in application scenarios. Since most of the control is operated through software, the appearance can be more concise and clear. The operator only needs to click the mouse gently, and no longer needs to adjust the complex large-scale mixer on the spot to complete the function conversion as before, which greatly simplifies the operation difficulty.
The BR-106D network audio processing center is a network audio processor with 128 digital inputs and 128 digital outputs. It can operate normally on the dante audio network and can control each channel through a computer. The backup network port is more humane in design. The first 16 input / output channels can all be processed by DSP. Its fire-fighting linkage function and rich control interface make this BR-106D better fit various field systems.
The BR-10V4 network audio server is a system that can freely design audio, processing, control and network switching POE power supply. It uses advanced DSP processing technology, with new automatic mixing, feedback cancellation and other algorithms, to solve various practical problems in application scenarios. The built-in Dante module provides a high-bandwidth, low-latency, high-compatibility, and low-cost solution for network audio transmission. Through the modular software operation, it is more concise and bright. Simply click the mouse, which greatly simplifies the operation difficulty. Provides 6 network ports, supports PoE, 10 / 100M self-adaptation, 100 meters transmission distance, IEEE802.3at, single port maximum power 30W, 12/36 power supply. Easily meet the high-quality voice needs of local network sound reinforcement, recording, broadcasting, interconnection and remote interactive education.
When Legend meets future. The 1073OPX Optional Digital card provides a USB and Dante AD/DA interface with eight channels of analogue to digital conversion for each 1073OPX preamp output and two channels of Digital to Analogue conversion for the digital monitor return signal path. The USB connection allows the 1073OPX to be connected to a DAW enabled PC/MAC computer to be used as a Primary/Core audio interface. In addition to the USB connection, Primary and Secondary Dante connections allow for the 1073OPX to be connected to any Dante Audio-Over-Ip network as a Dante enabled preamp. The Digital card can be retrofitted easily to any existing 1073OPX unit.
Eight Legendary 1073® remote-controlled Preamps with Marinair® Transformers, USB and Dante digital connectivity taking the Classic Neve preamp sound into the future.
Features:
8 Channels of remote-controlled 1073 Mic/Line/Instrument Preamplifiers.
Exclusive Neve® Marinair® transformers on Microphone input.
Class-A transformer-less DI input
Remote control software can control up to 8 1073® OPX racks at a time (64 preamps!)
Automatic Total Recall™ of all settings.
Front Mic/Line combi input
Rear Mic/Line D-Type connection
80Hz High pass filter
-25dB pad
Phase flip
Smart Phantom Power control
Hi/Lo Impedance selector from 300Ω to 1.3KΩ
Separate stereo monitor path with Independent level control
Latency-free monitoring of all signal sources
Eight front D.I inputs for instrument tracking
Front mounted Headphone output
Digital Option containing:
USB connection for use as standalone primary audio interface/core audio device.
Dante Primary and Secondary connection for Audio-over-IP application.
The VAR3 is the state of the art computer based digital recorder and emergency voice override controller.
The VAR3 has pre-recorded broadcast capabilities for simultaneous transmission on all local AM and FM broadcast stations.
Multiple independent channels are provided to allow different messages to be broadcasted to different traffic zones (for example, different tunnels). Multiple sites may be controlled from a single VAR3.Two Way Radio
The VAR3 supports remote control using the VAR3 Real Time Conroller (VAR3-RTC) or through Canam's Low Level Remote Control Protocol (LRC Protocol).
96KHz sample rate,floating point DSPPhase,All past filter,12 EQ,Crossover,Limiter1000ms for each input and outputDriver freeAPP for IOS/Androi(new version)
■ 4 signal inputs and 8 signal outputs (xlr, balanced) ■ Wifi control via usb or tcp/ip lan (ethernet) ■ 96khz sampling rate ■ 64 bit floating dsp ■ Dynamic range:>110db ■ Maximum input level at +23dbu ■ Maximum output level at +23dbu ■ Operational frequency range 20hz to 20khz ■ Processing delay:1000ms(input)1000ms(output） ■ latency：<0.2ms ■ 20x2 character blue crystal lcd display ■ 30 presets memory on hardware unit ■ 12 band fully parametric(frequency,q and gain)equalizer on each output channel and input channel ■ 180 phase inverter and mute button on each output ■ Limiter available on each output channel ■ For added safety of the speakers ■ USB interface for pc control ■ RS-485 interface ■ limiter:-20db`+20db ■ app for ios and android and ipad(new version) ■ all pass filter:adjustable frequency and q setting control
■ 4 signal inputs and 8 signal outputs(xlr,banlanced) ■ Wifi control via usb or tcp/ip lan (ethernet) ■ 48khz sampling rate ■ 24 bit floating dsp ■ Dynamic range:>110db ■ Maximun input level at +23dbu ■ Maximun output level at +23dbu ■ Operational frequency range 20hz to 20khz ■ Processing delay:1000ms(input)210ms(output） ■ latency：<0.2ms ■ 20x2 character blue ceystal lcd display ■ 30 pressrts memory on hardware unit ■ 8 band fully parametric(frequency,q and gain)equalizer on each output channel and input channel ■ 180 phase inverter and mute button on each output ■ Limiter available on each output channel ■ For added safety of the speakers ■ USB interface for pc control ■ RS-485 interface ■ limiter:-20db`+20db ■ app for los and android and ipad(new version) ■ all pass filter:adjustable frequency and q setting control
3 levels of power design meet the needs in the application of different occasions Intelligent cooling system makes power amplifier work quieter Stereo/Parallel/Bridged-mono mode Advanced switch-mode power supply technology for high performance Upgraded cooling fan with magnetic suspension technology and low nosie 2u chassis structure design The class A/B power supply circuit design Soft start function Power Requirements: 220-240V, 50/60HZ
The DAP series are integrated, 4 channel professional amplifiers using Magnetic's unique Class D circuit. Adopted DSP with WIFI, the amplifiers can be used in any kind of professional amplifications.
Features:
High efficient Class D Full band with low distortion 85-265V with PFC Low stand by consumption for green energy Intelligent sleep and wake-up Limiter output by software when overloaded
The NetSpire™ Network Audio Controller (NAC) is an intelligent, network enabled digital audio controller with integrated power amplifiers, digital signal processing, digital voice announcement, analogue input and output and digital I/O control signals. The device supports a large number of integrated functions greating reducing installation cost and system footprint.
The NetSpire™ NAM2i is an intelligent, network enabled amplifier. The device receives network digital audio and provides output to speakers using two integrated 12 watt Class D amplifiers, digital signal processing, and digital voice announcement.
The NetSpire™ NAM2i devices are housed in IP66 rated enclosures suitable for installation in harsh, outdoor, and rolling stock environments, where immunity from dust, water and physical deformation is required.
The NAM2i units integrate seamlessly with the NetSpire system and allow audio zones to be created anywhere a connection to the network is available. Each speaker is connected to an independent audio channel, and can be assigned to separate announcement zones or grouped in the same zone. The NAM2i can be configured to perform a different series of audio processing functions on each of the output channels. The 24bit DSP can perform the following configurable chains of audio processing functions on each channel:
Delay
Gain adjustments
Dynamic Range Compression & Expansion
Power Limiting
Parametric Frequency Equalisation
The NAM2i units also have a single balanced audio input which can be used to connect an Ambient Noise Sensing Microphone (ANC). The microphone is used to measure the ambient noise conditions of zone and adjust the volume of announcements automatically to compensate.
The NAM2i housing is IP66 rated, and encompassess the cable terminations on the NAM2i carrier bracket.
The NetSpire™ NAR4c is a compact unit providing software controlled digital audio switching between all audio inputs and outputs. The unit provides four digital audio network inputs and outputs, in addition to four balanced audio inputs and outputs. The unit also has eight digital isolated inputs and outputs for external control.
The NetSpire™ IPPA is a network enabled call station. The unit has eight programmable buttons which can be assigned to zone selection, or to initiate system functions such as DVA. The NetSpire IPPA can also be configured to receive intercom and help phone calls.
The unit includes a preview speaker which can be used to preview DVA announcements, or monitor the activity on an announcement zone. The preview speaker can also be used for hands free intercom and help phones functions. For receiving intercom and help phone calls, a headset connection is provided allowing the use of industry standard telephony headsets.
Two versions of the NexSys Nx-8 Network Audio Interface modules are available supporting Dante and CobraNet steaming audio protocols. Both cards deliver eight (8) channels of streaming audio to Crest Audio networkable power amplifiers.
The Versarray™ Pro 218 Sub Powered Subwoofer speaker system consists of a pair of 18″ Low Rider® woofers combined with a super-solid cabinet with a simple, quick, yet flexible rigging system. Designed to provide modular coverage of small to medium venues, and intended for use with the companion Versarray™ Pro 112 models, the Versarray™ Pro 218 Sub offers excellent versatility with a very high performance capability. The subwoofer system consists of the following woofer components: a pair of 18″ Low Rider® series woofers with a very long throw 4″ voice coil structure. Capable of over 800W of continuous power handling (AES Std 2-1984) each, these woofers can project a lot of low frequency energy.
The Versarray™ Pro 218 Sub incorporates Peavey’s UniVent™ air pumping venting system. The UniVent™ venting system literally pumps air through the enclosure, exchanging the stale hot air inside the cabinet for the cooler outside air. This helps keep the woofer operating temperatures from getting so high, and increases reliability and reduces power compression under heavy continuous drive conditions. The air pumping action is achieved without excessive turbulence or any significant net asymmetry of total vent air flow.
Power for both woofers is supplied by some very efficient power amplifier systems, controlled by a sophisticated and refined DSP operations system with Dante connection capability. Total system power is 3000W total peak power, with 1500W total sine wave power for the woofers. This sheer power is controlled precisely and processed by a high performance DSP system, which provides all the crossover and EQ functions, as well as providing all limiting, compression and driver protection duties with unfailing attention to every detail of the music.
An optional special groundstack bracket set mounts to the Versarray 218 Pro Sub, and allows up to three of the Versarray™ Pro 112’s to be mounted on top of the Versarray 218 Pro Sub, and angled upward, for use on stage in a stadium seating situation.
The MDM32 is a Dante Brooklyn II based 32x32 Interface card for all NION frames and the CAB4n audio bridge. The MDM32 replaces the discontinued DLM Interface and brings added Dante features such as Device Lock, support for DDM and AES67 compatibility.
The Q-SYS™ Core 110f processor is the latest addition to the Q-SYS™ Core family providing a fully integrated audio, video and control solution for small, single-room projects up to the largest Enterprise scale deployments.
Features
Class leading I/O: Core 110f has 24 I/O + USB, POTS and VoIP simultaneously offering the best cost to I/O ratio in a single SKU, single chassis product available on the market.
8 Flex Channels: Nearly all the flexibility of a card-based DSP solution without the hassle of multiple SKU’s and custom ordering.
True IT Software Integration: The Q-SYS Software Ecosystem is a true IT integrative solution that is free of the fixed hardware limitations seen in competing products. It allows for greater functionality such as Layer 3 routing, LDAP contact server integration, SNMP monitoring, and more.
Suite of Software-Based Conferencing Technology applications: Built and owned by QSC from the ground up allowing for continued refinement, without any additional hardware. The suite includes next generation acoustic echo cancellation (AEC), multiple-instance SIP softphones, gain sharing and gating automixers.
Unified Software Platform: The integrator has a single training investment in one software design tool rather than needing to learn several platforms to scale from small to large systems.
Connect to Q-SYS Reflect Enterprise Manager
This processor can be automatically connected to your Q-SYS Reflect Enterprise Manager, a powerful monitoring and management platform for the Q-SYS Ecosystem.
The Soundweb London BLU-100 offers a fixed configuration of 12 inputs and 8 outputs, configurable signal processing and a high bandwidth, fault tolerant digital audio bus.
The BLU-100 has open architecture which is fully configurable through HiQnet™ London Architect. A rich palette of processing and logic objects and a “drag and drop” method of configuration provide a simple and familiar design environment.
This processor features a low latency, fault tolerant digital audio bus of 48 channels which uses standard Category 5e cabling giving a distance of 100m between compatible devices. Fiber media converters can be used to increase the distance between devices to over 40km.
The BLU-100 is compatible with the entire Soundweb London family and its 48 channel digital audio bus represents channels 1-48 of the larger 256 channel digital audio bus when integrated with the BLU-800, BLU-320, BLU-160, BLU-120 and BLU-BOB devices.
Analog Inputs provide software configurable gain in 6dB steps up to +48dB per channel and software selectable Phantom Power per channel.
Phantom Power, Signal Present and Clip information per channel is easily accessible, without the requirement for a PC, from clear front panel LED indication. A bi-directional locate function allows devices to be identified both from and within HiQnet London Architect.
12 Control Inputs and 6 Logic Outputs allow the BLU-100 to be integrated with GPIO compatible devices. The Soundweb London Interface Kit, comprehensive documentation which details how Soundweb London systems can be integrated with third party control systems, is included within the installation of HiQnet London Architect.
The BLU-100 and the other members of the Soundweb London family provide the building blocks of the perfectly tailored system solution.
The speaker is Power supply via POE+ (Power over Ethernet) or DC19V power supply, available at option. The speaker includes a Class-D Audio Power amplifier which provides effective use of power. The audio network system is also compatible with AES67 which makes this speaker system to be flexible with other audio network systems. The system comes with 3” 30W loudspeaker driver, MNS-3AXXRWFS-1P that has excellent dispersion, wide bandwidth and smooth frequency response which makes this the top choice for today’s overhead commercial applications. This assembly can be used in wide range of projects for paging and background music applications.
[Model:MNS-3A11RWFS-1P] 1 Channel, Only Master DANTE Speaker. [Model:MNS-3A12RWFS-1P] 1 Channel, Reserve Additional Passive Speaker Terminals. [Model:MNS-3A22RWFS-1P] 2 Channels [One Channel for Master Speaker, Another Channel for Passive Speaker], Reserve Additional Passive Speaker Terminals.
The MONISMS MNS-6AXXWS-2P is a digital steerable active wall-mounted wooden speakers with DANTE®-Input. Thanks to its very small and unobtrusive enclosure the MONISMS-Speaker is a fit for most architecturally sensitive environment including museums, churches, conference-rooms and many more challenging spaces and environments. With its two-channel DANTE®-input integration into existing IP-networks as well as a direct integration to other DANTE®-enabled products is simple.
[Model:MNS-6A11WS-2P] 1 Channel, Only Master DANTE Speaker. [Model:MNS-6A12WS-2P] 1 Channel, Reserve Additional Passive Speaker Terminals. [Model:MNS-6A22WS-2P] 2 Channels [One Channel for Master Speaker, Another Channel for Passive Speaker], Reserve Additional Passive Speaker Terminals.
The MONISMS MNS-8BXXWS-2P [MONISMS Model:MNS-8B11WS-2P / MNS-8B12WS-2P / MNS-8B22WS-2P] is a digital steerable active wall-mounted wooden speakers with DANTE®-Input. Thanks to its very small and unobtrusive enclosure the MONISMS-Speaker is a fit for most architecturally sensitive environment including museums, churches, conference-rooms and many more challenging spaces and environments. MNS-8BXXWS-2P is powered by standard POE+ and has a MAX power of 30 watts. If there is not POE+ used, It can used the external 19VDC power supply.
[Model:MNS-8B11WS-2P] 1 Channel, Only Master DANTE Speaker. [Model:MNS-8B12WS-2P] 1 Channel, Reserve Additional Passive Speaker Terminals. [Model:MNS-8B22WS-2P] 2 Channels [One Channel for Master Speaker, Another Channel for Passive Speaker], Reserve Additional Passive Speaker Terminals.
The MONISMS MNS-4AXXICS-2P is a digital steerable active column-speaker with DANTE®-Input. Thanks to its very small and unobtrusive enclosure the MONISMS-Speaker is a fit for most architecturally sensitive environment including museums, churches, conference-rooms and many more challenging spaces and environments. The DANTE/AES67 column-loudspeaker advances the MONISMS Architectural line of modular arrays with a self-powered electronically-steerable loudspeaker offering consistent audio levels with outstanding vocal intelligibility and full range music reinforcement. MNS-4AXXICS-2P is powered by standard POE+ and has a MAX power of 30 watts. If there is not POE+ used, It can used the external 19VDC power supply.
[Model:MNS-4A11ICS-2P] 1 Channel, Only Master DANTE Speaker. [Model:MNS-4A12ICS-2P] 1 Channel, Reserve Additional Passive Speaker Terminals. [Model:MNS-4A22ICS-2P] 2 Channels [One Channel for Master Speaker, Another Channel for Passive Speaker], Reserve Additional Passive Speaker Terminals.
Third party applications that use Dante Ready™ allow customers to purchase and activate Dante audio channels after installation using the Dante Activator tool in Dante Controller 4.5 or higher. Dante Activator is tied to an active Audinate user account and accepts standard credit card payments.
![1073opx-digital-option-card-136-p[ekm]1000x691[ekm]](https://www.getdante.com/wp-content/uploads/2024/01/1073opx-digital-option-card-136-pekm1000x691ekm.jpg)
![1073opx-134-p[ekm]1000x666[ekm]](https://www.getdante.com/wp-content/uploads/2024/01/1073opx-134-pekm1000x666ekm.jpg)
