Dante-enabled Product Catalog

A HAL1x Multiprocessor supports 16 in x 16 out audio, with 8 in x 8 out on balanced analog connections, and another 8 in x 8 out through RADs. It is unique among the HAL Multiprocessors because it carries an Expansion Bus, which can increase the I/O up to 512 in x 512 out by adding up to 32 daisy-chained Expanders to a single HAL1x. A few to hundreds of more gain-sharing mic inputs are possible with AM Automixers. HAL1x's DSP brain has over 5 times the DSP horsepower of the popular Rane RPM 88.

The P-Series from Renkus-Heinz represents the pinnacle of performance for compact point-source loudspeakers. Latest generation Complex Conic horn geometry coupled with patented CoEntrant Mid/High driver technology delivers uncompromising detail and extreme sound pressure levels. Advanced amplification, processing, and protection through RH’s own SA Amplifiers provide the ultimate in performance, consistency, and reliability. Application focused loudspeakers and comprehensive accessory packages have been purposefully designed to address the acoustical and logistical challenges of live sound reinforcement from mains and fills, to stage and control room monitoring.

Dante-enabled P Series Models:

• P2-10-RD
• P3-12-RD
• P3-64-RD
• P3-15-RD
• P3-10M-RD

The ARNI (Audio Routed Network Interface) G2 component of an OMNEO system enhances the scalability of the system by its ability to act as a DHCP (Dynamic Host Configuration Protocol) server which eliminates the need to use the IPv4LL protocol. As a DHCP server, ARNI G2 supports one (1) subnet when there is no DHCP server available. It can act as a DNS (Domain Name System) server, storing the DNS-SD (Domain Name System-Service Directory) records of nodes and responding to controller queries, meaning standard DNS can be used for DNS-SD and name resolving. ARNI G2 also extends the use of PTP (Precision Time Protocol) over multiple IP (Internet Protocol) subnets by acting as a boundary clock, synchronized to a master clock using unicast PTP and acts as the clock master in its own subnet using multicast PTP to synchronize the OMNEO nodes.

The KP-4016PB is a 16-Position HD Color Display Keypanel with pushbutton that delivers superior high-quality digital audio using the Bosch-branded OMNEO technology with Dante by Audinate audio over IP via either copper or fiber. The KP-4016PB delivers top-notch audio, free of noise, delay, and other artifacts present in older technology. This family of keypanels includes a rich set of connectors as standard, including GPIO and RC. As with other RTS products, emphasis has been placed on backward compatibility with previous generations of matrices including analog technology.

The KP-4016PB keypanel utilizes the latest generation of wide angle TFT displays providing superior clarity, resolution, and longer display life, delivering high-quality readability under a variety of lighting conditions.

The KP-5032PB is a 32-Position HD Color Display Keypanel with pushbutton that delivers superior high-quality digital audio using the Bosch-branded OMNEO technology with Dante by Audinate audio over IP via either copper or fiber. The KP-5032PB delivers top-notch audio, free of noise, delay, and other artifacts present in older technology. This family of keypanels includes a rich set of connectors as standard, including GPIO and RC. As with other RTS products, emphasis has been placed on backward compatibility with previous generations of matrices including analog technology.

The KP-5032PB keypanel utilizes the latest generation of wide angle TFT displays providing superior clarity, resolution, and longer display life, delivering high-quality readability under a variety of lighting conditions.

The AVN-AO16 audio converter and interface converts up to sixteen analogue outputs from the Dante Audio-over-IP networking standard. This cost effective 1U rack-mount unit offers an easy solution for AV professionals and system integrators. It is simple to configure and operate, with all set-up done via the standard Dante Controller software and power via PoE (Power Over Ethernet).

All analogue outputs are on high-quality Neutrik XLR connectors and there are front panel status/confidence LEDs for POE, Link, and Clock.

• 16 x balanced analogue outputs on XLR.
• 1 x RJ45 Dante connector (100Mb/s Ethernet Port).
• POE, Link, and Clock LED status indicators.
• Configuration using Dante Controller.
• AES67 operation & Dante Domain Manager compliant.
• Powered by PoE.
• 1U 19” rack-mount form factor.

The AVN-DIO01 is a Dante AoIP network to analogue XLR stereo output converter in the Sonifex DIO range of Dante input/output devices. It features two balanced analogue XLR outputs and one Neutrik EtherCon® connector for direct connection to a Dante AoIP network. The D/A circuitry offers >120dB of dynamic range - ten times better than similar competing products.

All Sonifex DIO interfaces provide a simple, convenient, and elegant plug and play method of connecting legacy analogue and digital audio equipment to the Dante AoIP audio network.

All DIO products use Dante Controller for configuration and are powered by PoE (Power over Ethernet). They use rugged aluminium boxes with side slots for screw-mounting and contain superior audio circuitry for optimal audio performance. All feature rugged Neutrik EtherCon® connectors and Neutrik lockable audio connectors for ultra-reliable connectivity.

SoundTube Entertainment’s IPD-Hub 2 Amplifier creates an IP-based audio distribution alternative to traditional 70v or 100v audio systems. Designed for small to medium applications, the IPD-Hub 2 combines Attero Tech Axiom endpoints with Dante infrastructure to create a complete IP-based system at a comparable price point to traditional 70v or 100v systems. The IPD-Hub 2 features two-channel DSP amplification with a multitude of power options, including PoE, PoE+, 40W PoE and 24v PS.

The Model 372A Intercom Beltpack is a highly compact user-worn device that combines a single channel of talk and two channels of listen. The unit begins with the features offered by traditional analog party-line (PL) intercom user devices and adds a range of new capabilities, along with the advanced performance and flexibility that Dante® audio-over-Ethernet provides. Over a standard IP network, multiple Model 372A and other compatible Studio Technologies' beltpack units can be used to create party-line intercom applications with help from an external Dante-enabled audio matrix such as the Studio Technologies' Model 5422 Dante Intercom Audio Engine. Alternately, Model 372A units can be used "point-to-point" or interfaced with Dante-compatible matrix intercom systems.

Key Features

• Dante audio-over-Ethernet technology
• One talk and two listen channels
• Supports dynamic and electret microphones
• 5-pin female XLR headset connector
• 3.5 mm 4-conductor TRRS headset connector
• Call receive and display function
• Excellent audio quality
• Uses STcontroller for configuration
• AES67 and Dante Domain Manager™ (DDM) support
• Power-over-Ethernet (PoE) powered

The Model 373A Intercom Beltpack is a highly compact user-worn device that combines a single channel of talk and two channels of listen. The unit begins with the features offered by traditional analog party-line (PL) intercom user devices and adds a range of new capabilities, along with the advanced performance and flexibility that Dante® audio-over-Ethernet provides. Over a standard IP network, multiple Model 373A and other compatible Studio Technologies' beltpack units can be used to create party-line intercom applications with help from an external Dante-enabled audio matrix such as the Studio Technologies' Model 5422 Dante Intercom Audio Engine. Alternately, Model 373A units can be used "point-to-point" or interfaced with Dante-compatible matrix intercom systems.

Key Features

• Dante audio-over-Ethernet technology
• One talk and two listen channels
• Supports dynamic and electret microphones
• 4-pin male XLR headset connector
• 3.5 mm 4-conductor TRRS headset connector
• Call receive and display function
• Excellent audio quality
• Uses STcontroller for configuration
• AES67 and Dante Domain Manager™ (DDM) support
• Power-over-Ethernet (PoE) powered

Since TAIDEN introduced the world's first digital infrared wireless conference system in 2008, its HCS-5300 Series Digital Infrared Wireless Conference System has successfully equipped the United Nations Headquarters, the World Bank, the Business Roundtable Headquarters, the China National Convention Center, the Ningxia International Convention Center, Chongqing Municipal Government and many other high-profile venues.

Now TAIDEN extends its portfolio of wireless conferencing solutions by launching a compact complement, HCS-5335 Series Compact Digital Infrared Wireless Conference System. Its performance stays true to its predecessor but features ingenious integration by combining the transceiver and the control unit together. No changes or further holes need to be made in the meeting rooms to be equipped thanks to its wireless transmission of audio signals and tabletop/on-tripod installation of the new main unit, making the system an ideal solution for small to medium sized multipurpose rooms or historical buildings.

• Digital infrared audio processing and transmitting technologies ensure superb sound quality
• IR transmission technology, no worries about eavesdropping and radio interference, no RF radiation
• Unlimited quantity of infrared wireless conference systems within a building
• Easy to set up, move and remove, no wiring or drilling, perfect solution for historic venues
• Compact and highly efficient control unit with built-in infrared receiver
• 1~6 MHz transmission frequency, undisturbed by HF driven light sources and mobile phones
• IR coverage area radius＞8 m (4 m high ceiling)
• Excellent immunity to RF interference from mobile phones and RF devices

The HPA-160D/02 is a Digital audio power amplifier. Its a compact and efficient combination of digital power amplifier and switching power supply.

• Class-D power amplifier with theoretical efficiency over 80%
• Automatic adaptation to all mains voltages world-wide
• Low-heat generation, long service life
• Energy saving and cost efficient
• Operation mode: Stereo/bridge
• 2×SPEAKON socket for loudspeakers
• TM 2×RJ45 jack for digital audio input via Dante networking
• 1 Line In and 1 Line Out (Diameter 6.4 mm phone jack)
• Embedded Web Server for power amplifier configuration (e.g. limiter, EQ and mix) and view of microphone on/off status
• All-round protection from shortcut circuit, direct current and overheating, power supply overload or overheating control

Taiden's HCS-8300 Series is the first Paperless Multimedia Congress System in the world. It is especially designed for high-level meetings, such as summits, congresses, conventions, parliaments and city councils

• Based on TAIDEN independent intellectual property MediaCongress platform, never subject to viral infection, hacker-proof, safe and reliable
• Paperless Multimedia Congress Terminal - equipped with a 10" 1280X800 high-resolution LCD touch panel, realizes paperless meetings, various HD video services, interactive conference control functions (speech, voting, 64 CHs x 2) and conference services, etc.
• Capacitive touch panel supporting multi-touch, convenient and efficient for operation
• Built-in 5-megapixel camera with flashlight, ingenious video conversation function
• Based on TAIDEN originated GMC-STREAM Gigabit Multimedia Congress Stream technology, all audio and video signals are transmitted via a Cat.6 Gigabit network cable. GMC-STREAM fully guarantees the real-time performance and stability of the important data stream of the meeting, such as audio, voting information, and control information
• Based on ingenious CongressMatrixTM technology, integrated n×8 audio matrix processor to realize 8 channels group output function
• Microphone-array technology for HCS-8315 series Congress Unit and HCS-8348 series Congress Terminal
• Built-in E-ink nameplate (HCS-8338-NP and HCS-8348-NP series)
• Optional printed nameplate (HCS-8338 and HCS-8348 series)
• Built-in fingerprint identification module (HCS-8338A and HCS-8348A series)
• Increased reliability with “Closed Loop - Daisy Chain” connection topology
• 48 kHz audio sampling, 64 audio channels, each with a 30 Hz to 20 kHz frequency response for perfect sound quality
• Low power consumption design
• Supports Dante protocol to connect to peripheral digital devices without losing any sound quality
• Equipped with optical fiber interface to combine two widely separated conference rooms to form one unique coherent system
• Dual connection backup via optical fiber and Cat.5 cable between Congress Main Unit and Congress Extension Main Unit
• System power controllable by central control system
• Supports combining and separating conference rooms
• Booth combination & share system
• Connectable to multi channel audio input or output devices for versatile expansion of the system
• Connection facility for additional condenser or dynamic microphones, expanding user’s application spectrum
• Integrated USB interfaces in the Congress Main Unit for system upgrading and saving system parameters. Convenient for system maintenance
• Downward compatible with TAIDEN HCS-4100/50 Fully Digital Congress System

Блок представляет собой звуковой интерфейс локальной сети распространения AoIP сигналов по протоколу Dante.

Блок представляет собой звуковой интерфейс локальной сети распространения AoIP сигналов по протоколу Dante. Он может иметь различное количество входов и выходов нескольких форматов.

Опциональные модули:

• ТR-122-1: 8 монофонических симметричных аналоговых входов (1 разъем DB25); 15 000 руб.;
• ТR-122-2: 4 двухканальных цифровых входа формата AES3 (1 разъем DB25); 22 500 руб.;
• ТR-122-3: 2 монофонических симметричных аналоговых входа и 4 дополнительных монофонических аналоговых выхода (1 разъем DB25); 15 000 руб.;
• ТR-122-4: 4 двухканальных цифровых выхода формата AES3 (выходы добавлены в AES разъём базового блока). Модуль может быть установлен вместе с любым из других опциональных модулей; 10 500 руб.

Specifically designed for use where operators need to create a custom mix from a DANTE stream. With powerful user features accessible via the web UI, the MPA1 Dante is simple to use and flexible enough to meet specific and demanding workflow requirements.

Features

• Fast and intuitive scroll to listen operation of any chosen audio pair.
• ‘Zoom View’ of any audio pair including Audio Phase Metering

In today’s world of network savvy customers, organizations are placing increasing importance on ensuring their critical Network AV systems are available and performing acceptably.

Introducing PacketAV™ Sentinel – Network AV monitoring simplified by Visionary.

Sentinel offers a number of benefits for organizations, improving efficiency by ensuring that time is not wasted waiting for problems to be reported, but is more usefully spent on resolving issues. This proactive approach to Network AV monitoring allows issues to be identified before they impact end users and cause disruptions. This increases system up-time and reliability. As a result, user satisfaction is significantly improved.

Sentinel represents an opportunity for integrators to offer new services, including scalable service programs, and developing sustainable revenue streams.

The Sentinel service uses a local agent to communicate with Network AV devices in the system. It can then interact with local or cloud systems for reporting and logging, as well as API based integrations.

Sentinel is competitively priced and can scale from small, standalone systems to global enterprises.

PacketAV Duet is nothing short of a paradigm shift for networked AV. True convergence is finally here; a single platform to support Dante™/AES67 and Video over IP.  Integrate 4K UHD video over IP into your Dante™ enabled audio network and bypass the constraints of traditional switch matrix systems by harnessing the flexibility and scalability of converged IP networks.

This is video for audio professionals.

The PacketAV Duet Wallplate Encoder provides powerful 4K UHD Video and Dante/AES67 Audio encoding over Gigabit Ethernet in a convenient wallplate form-factor. It can be easily mounted in a wall, tabletop, lectern, or floor box using a standard 2-gang US or UK back box, and connected to power (standard POE) and Ethernet using only a single category cable.

Visionary’s PackeTV® and PacketAV® products can be deployed on any industry standard IP network.  They can be used on existing enterprise IP networks or a physically separate parallel network [private network] to offload traffic, using the same network protocols, methods, and devices but without intermingling of video traffic with data or voice; with equal ease of installation.

Applications

• In-Room / Image Magnification
• Commercial and Residential AV Systems
• House of Worship
• Sports Bars
• Retail
• Live Venues
• Stadiums
• Reception Areas
• Classroom/Education
• Digital Signage
• Boardroom Systems
• Collaborative PC Systems
• Courtrooms
• Command and Control Rooms
• Luxury Transport

The es-269V subwoofer brings a full arsenal of VUEDrive electronics inside the cabinet of VUE’s popular es-269 ACM subwoofer. The “V” version offers 2000W of internal amplification, making it the ultimate Dante endpoint for delivering high definition audio at professional levels when combined with VUE’s e-class loudspeakers. The built-in VUEDrive Systems Engine sends 1000W to the internal dual 6x9-inch transducers while providing two 500W output channels, or zones, for adding up to four e-351 or two e-352 passive models. Output channels can also be used to drive a second es-269 passive subwoofer. The es-269V features full network control via SystemVUE software, along with Analog and Dante audio inputs. Acoustically, the es-269V delivers impressive size-to-SPL performance thanks to VUE’s patent-pending Active Compliance Management (ACM) technology. ACM places two high-performance 6x9-inch drivers into a unique arrangement that leverages the benefits of both band-pass and vented alignments.

Vue audiotechnik's e-351 PoE is a “Nano” coaxial speaker, which incorporates Dante-enabled VUEDrive electronics, including 30W of fully optimized bi-amplification that is powered via ethernet form a POE+ (802.3at) switch. Like it’s passive sibling, the e-351 PoE combines an ultra-rigid aluminum enclosure with a revolutionary 3.5-inch coaxial driver that utilizes VUE’s highly-lauded Beryllium HF component to deliver a level of output, fidelity, and efficiency that’s far beyond more conventional compact systems

The FM+ End users can listen with either an FM receiver or over Wi-Fi with their own smartphone. Along with this flexibility comes exceptional audio quality, as the FM+ is built on a professional digital audio (DSP) platform. Added plus: Its optional Dante interface provides integrators with a full audio networking solution.

The new FM+ is designed to support those who want to use their own smartphones and headphones for a more discreet assistive listening experience. Simplicity is also available for those who want a more traditional assistive listening system with a dedicated FM receiver and headset.

The FM+ Dante interface provides integrators with a full digital audio networking solution. It is based on the Audinate UXT Ultimo chipset. This chipset supports both AES67 and SMPTE 2110.

WaveCAST is a Wi-Fi platform designed for pro-audio applications where high-quality sound is required. Hearing assistance can be optimized for hearing loss, music can be optimized for high-fidelity playback, and voice can be set for maximum speech intelligibility. Custom pre-sets can also be established for specific performance applications.

Professional audio inputs on the WaveCAST include 1/4” XLR connectors, phantom power and a line level output jack. In addition to multi-stage gain control inputs, the DSP features include AGC, limiters, high and low pass filter, and adjustable range compressor control.. WaveCAST supports both unicast and multicast network configurations. Up to four WaveCAST systems can be connected to the same Wi-Fi network to provide multiple listening channels -- supporting 45 users in unicast mode or 1500+ users in multicast mode.

The WaveCAST Dante interface is based on the Audinate UXT Ultimo chipset. This chipset supports both AES67 and SMPTE 2110.

DD2 devices are gateways used to convert DANTETM (Digital Audio Network Through Ethernet - developed by AUDINATE) protocol. These devices allow the extraction of analog audio signals from the DANTETM network as well as the introduction of analog channels within the same network.

DD2 is a device designed for use in installation, for which the analog inputs and outputs are made through Euroblock 3.5mm connectors.

It has balanced inputs and outputs to provide greater immunity to noise that interferes with audio signal lines.

The Yamaha RIVAGE PM10 system provides flexible configuration encompassing the DSP-R10 DSP engine, CS-R10 control surface, the RPio622 I/O rack, two types of HY cards, and three types of RY cards. Its design allows numerous configurations to ideally match the scale and functional requirements of any application.

Connection to a computer for multitrack recording as well as to CL or QL series consoles and other external equipment is supported in the RIVAGE PM10 system via a Dante network. Dante, designed for simple setup with an extremely wide range of professional audio devices, works ideally with TWINLANe to create an exceptionally flexible, reliable system overall.

The optional HY144-D card provides the interface to Dante networks. High-resolution recording of up to 128 channels (input and output) at 96 kHz is possible if the computer is equipped with a Dante Accelerator PCIe audio interface card. With Dante Virtual Soundcard the maximum in/out track count is 64.

Multitrack recordings of rehearsals made in this way can be used for "virtual sound checks" when the performers aren't available. Input patching for all required channels can be switched in one operation for both recording and virtual sound checks. Recorder playback and stage input can even be smoothly combined when needed.

Asystems' DMP808D is a 12-in x 8-out digital matric processor. Designed specifically for installed sound, the Asystems' DMP808 automatic mixers combine clean, simple designs with smart signal processing. These systems offer fast-acting, noise-free microphone normalization that automatically adjusts to changes in background room noise. This essentially helps maintain high quality audio despite the number of open microphones. Networking capabilities allow integration of any number of DMP808 mixers for expanding the system to up to 400 microphones.

Input on the DMP808 is achieved through professional standard 3-pin euroblock connectors for balanced connections. Two sets of stereo RCA connectors are also included for extended application. All inputs and outputs are utilized through the flexible matrix routing system, controlled via the included user-intuitive PC software. This software also allows you to control the extensive on-board signal processing, including 4-band parametric EQs, feedback silencers, duckers, noisegates, compressors, limiters and, of course, automatic mixing including NOM (Number of Open Microphones) compensation. With flexible networking capabilities (including a Dante networking option) and highly accurate automixing, the DMP808 automatic mixer is a must-have for all large commercial installations.

https://www.asystems-sys.com/index.php/products/audio-switcher/digital-matrix-processors/dmp808

Asystems introduces the DMP8800D, a unique 8-in x 8-out digital matrix processor that boasts ‘simple integration’ to your existing system. The DMP8800D is built from the ground up on a powerful, open platform. This digital matrix processor transcends all limitations in scope, performance, and usability that tend to mar other network audio control systems.

Essentially, the DMP8800D software provides a means to achieve your project’s goals, regardless of the requirements. Rock-solid performance is backed by brilliant processing that is sure to enhance any audio you may throw at it. All of this combines to make the DMP8800 an ideal solution for boardrooms, conferences, convention centers, houses of worship, legislative installations, performing arts, stadiums and arenas, theme parks and transportation facilities.

https://www.asystems-sys.com/index.php/products/audio-switcher/digital-matrix-processors/dmp8800

The Asystems DMA8413D is an 8x4 1000 watt digital matrix amplifier. Asystems introduces the DMA series digital matrix amplifiers – combining smart signal processing with a flexible modular mixing matrix and robust amplification. Sound complex? It’s not, because all routing and processing is adjusted through the simple yet intuitive software. The DMA series provides racks-full-o-gear in a modest 2U construct. Combining many great products into a simple design, the DMA series simplifies your installation and saves you money. Whether designing or installing systems in auditoriums, restaurants, houses of worship, boardrooms, courtrooms or performance spaces, Asystems has a DMA matrix amplifier that will fit your exact requirements.

https://www.asystems-sys.com/index.php/products/audio-switcher/digital-matrix-amplifiers/dma8425