Dante-enabled Product Catalog

ALCs provide all of the signal routing, zone switching, DSP processing, protective limiting, remote monitoring, and amplification functions needed between a mixer and the loudspeakers in virtually any Community Professional Loudspeakers application. Standard Ethernet communication protocols allow for fast system design, system control, and remote system monitoring. Analog and Dante® inputs are included in each model, for quick and easy integration into any new or existing system. Community-authored loudspeaker presets include equalization, high pass filters, and multi-stage limiters tailored to each model, ensuring consistent sound quality and full loudspeaker protection in every application.  

In-depth control and monitoring is accomplished via ArmonìaPlus System Manager Software.  Tailoring the sound and managing the system can be done at a remote, decentralized location.  The ALC-1604D can also be trusted in mission critical applications, such as fire alarm systems, thanks to the cleverly engineered power supply that allows reliable operation even when connected to a UPS in addition to the per-channel, user-assignable fault-indicating GPIO connectors on the rear panel.

ALCs provide all of the signal routing, zone switching, DSP processing, protective limiting, remote monitoring, and amplification functions needed between a mixer and the loudspeakers in virtually any Community Professional Loudspeakers application. Standard Ethernet communication protocols allow for fast system design, system control, and remote system monitoring. Analog and Dante® inputs are included in each model, for quick and easy integration into any new or existing system. Community-authored loudspeaker presets include equalization, high pass filters, and multi-stage limiters tailored to each model, ensuring consistent sound quality and full loudspeaker protection in every application.  

In-depth control and monitoring is accomplished via ArmonìaPlus System Manager Software.  Tailoring the sound and managing the system can be done at a remote, decentralized location.  The ALC-3202D can also be trusted in mission critical applications, such as fire alarm systems, thanks to the cleverly engineered power supply that allows reliable operation even when connected to a UPS in addition to the per-channel, user-assignable fault-indicating GPIO connectors on the rear panel.

LD Systems presents the ZONE X1208 19-inch DSP matrix processor with a wide range of remote control options. Thanks to its hybrid architecture DSP with 40-bit floating point DSP engine the ZONE X1208 allows professional users to load DSP templates to adapt to different installation requirements. In combination with the built-in Event Scheduler, users can create calendar-specific workflow controls and perform automated preset changes. Furthermore it features a REMOTE bus for integration with future LD Systems control panels and Paging microphones. For superior signal flexibility the ZONE X1208 provides 12 balanced mic/line inputs with premium grade microphone preamps and 48 V phantom power selection per input, 8 balanced line outputs, 8 GPI, and 8 GPO logic ports.

At only 1 RU the ZONE X1208 features a clean and intuitive front panel design and is based on the latest generation Linux operating system, enabling remote control via the Xilica Designer universal control software using the integrated Ethernet interface. In addition, dedicated remote control apps for iOS and Android are available to customize the ZONE X1208 user interface to meet individual project needs.

There is an Ethernet + Dante card optionally available for subsequent upgrading of the ZONE X1208 into a Dante-enabled Matrix system.

LD Systems presents the ZONE X1208D 19-inch DSP matrix processor with a wide range of remote control options. Thanks to its hybrid architecture DSP with 40-bit floating point DSP engine the ZONE X1208D allows professional users to load DSP templates to adapt to different installation requirements. In combination with the built-in Event Scheduler, users can create calendar-specific workflow controls and perform automated preset changes. Furthermore it features a REMOTE bus for integration with future LD Systems control panels and Paging microphones. For superior signal flexibility the ZONE X1208D provides 12 balanced mic/line inputs with premium grade microphone preamps and 48 V phantom power selection per input, 8 balanced line outputs, 8 GPI, and 8 GPO logic ports.

At only 1 RU the ZONE X1208D features a clean and intuitive front panel design and is based on the latest generation Linux operating system, enabling remote control via the Xilica Designer universal control software using the integrated Ethernet interface. In addition, dedicated remote control apps for iOS and Android are available to customize the ZONE X1208D user interface to meet individual project needs. The Matrix processor is equipped with integrated Ethernet + Dante card for advanced AoIP applications with 64×64 Dante Audio over IP channels. The Ethernet + Dante card is also optionally available for subsequent upgrading of the ZONE X1208.

RAM Audio® introduces this new generation of professional touring amplifiers based on the field proven QuantaPulse™ Technology: V Series / W Series (with only aesthetic differences).

 These new devices feature two or four channel models, ready for rough handling in the touring world. For this purpose, V/W Series amps implement oversized high efficiency regulated power supply with PFC front end to deliver their full performances independently of mains status.

This together with oversized high efficiency audio power stage, forced front to back cooling through a component-free path with removable front panel dust filters, improved rugged mechanical design with even weight distribution, full digital control from LCD display on the front panel… Resulting in: just power, reliability and robustness for your touring gigs!

V9000 Specifications:

RAM Audio® introduces this new generation of professional touring amplifiers based on the field proven QuantaPulse™ Technology: V Series / W Series (with only aesthetic differences).

 These new devices feature two or four channel models, ready for rough handling in the touring world. For this purpose, V/W Series amps implement oversized high efficiency regulated power supply with PFC front end to deliver their full performances independently of mains status.

This together with oversized high efficiency audio power stage, forced front to back cooling through a component-free path with removable front panel dust filters, improved rugged mechanical design with even weight distribution, full digital control from LCD display on the front panel… Resulting in: just power, reliability and robustness for your touring gigs!

V6000 Specifications:

Cloud offers five models in their CA Series - CA2250, CA2500, CA4250, CA6160, CA8125

The New CA Series of Digital Class-D Multi-Channel Amplifiers from Cloud Electronics, provides a range of simple and robust functions for commercial audio installers and users alike. Following Clouds industry renowned build and performance standards the new CA-Series Multi-Channel Amplifiers are designed specifically for commercial use in Retail, Leisure, Hospitality, Commercial and Industrial applications.

Features:

• Digital Class-D Multi-Channel Amplifier Series

• Energy Efficient Switch Mode Power Supply

• Dedicated Amp Modules per Channel

• 4Ω/8Ω or 70/100v Outputs per/Channel

• Power Sharing Capability

• Rear Dip-Switch Configuration of routing, high-pass filters, and 4Ω/8Ω/70/100v line level

• Auto Power Down (selectable)

• Remote Power Down option

• 2U Lightweight Chassis

• Energy Star Compliant (Application Pending)

Cloud's CV Series Dante Cards are available in three models - CDI-CV2, CDI-CV4, CDI-CV8

• 2, 4, and 8-channel Dante input option cards

• Support for 44.1kHz, 48kHz, 88.2kHz and 96kHz sample rates

• Dante AES67 interoperability mode

• 1Gbps Ethernet (CDI-CV8) or 100Mbps Ethernet (CDI-CV2 / CDI-CV4)

• Dante redundancy or Ethernet switch modes (CDI-CV8)

• Dante Domain Manager (DDM) ready

• Flexible channel input routing via Amplifier DSP configuration

Cloud's CA Series Dante Cards are available in three models - CDI-CA2, CDI-CA4, and CDI-CA8

Features:

• 2, 4, and 8-channel Dante input option cards

• Support for 44.1kHz, 48kHz, 88.2kHz and 96kHz sample rates

• Dante AES67 interoperability mode

• 1Gbps Ethernet (CDI-CA8) or 100Mbps Ethernet (CDI-CA2 / CDI-CA4)

• Dante redundancy or Ethernet switch modes (CDI-CA8)

• Dante Domain Manager (DDM) ready

The Glensound AoIP4O is packaged in a small & rugged format and designed for outside broadcast, theatre and location applications.

Both the AoIP4O and AoIP4I units are designed to easily and quickly interface existing analogue equipment to a Dante® / AES67 network audio system. Being powered by PoE means that only one cable needs to be connected to the network to carry both audio and power, providing flexibility and saving time on installation.

AoIP4O provides 4 balanced analogue audio Outputs from a Dante®/AES67 audio network. 

Robust proven construction techniques, simple reliable interface and excellent specification will help make your technician’s life hassle free, whilst the low cost and long asset life will keep the accountant satisfied.

The Glensound AoIP4I is packaged in a small & rugged format and designed for outside broadcast, theatre and location applications.

Both the AoIP4O and AoIP4I units are designed to easily and quickly interface existing analogue equipment to a Dante® / AES67 network audio system. Being powered by PoE means that only one cable needs to be connected to the network to carry both audio and power, providing flexibility and saving time on installation.

AoIP4I provides 4 balanced analogue audio inputs to a Dante®/AES67 audio network. 

Robust proven construction techniques, simple reliable interface and excellent specification will help make your technician’s life hassle free, whilst the low cost and long asset life will keep the accountant satisfied.

The Glensound BEATRICE D16 is a versatile and fully featured 16 channel desktop intercom with crystal clear audio designed for broadcast, theatre and professional audio applications.

It is part of our Beatrice intercom system that utilises the reliable and proven Dante® network audio transmission protocol to allow real time distribution of uncompressed audio across standard networks.  It is also AES67 compliant. As such the BEATRICE D16 is fully compatible with other manufacturers’ equipment using the Dante® and/ or AES67 protocols.

This sixteen channel desktop intercom was designed to be very easy to use for the operator and simple to set up for the technician. It includes all the basic functionality required for small intercom systems and none of the overly complex installation requirements normally associated with large systems.

The Glensound BEATRICE R16 is a versatile and fully featured 16 channel rackmount intercom with crystal clear audio designed for broadcast, theatre and professional audio applications.

It is part of our Beatrice intercom system that utilises the reliable and proven Dante network audio transmission protocol to allow real time distribution of uncompressed audio across standard networks.  It is also AES67 compliant. As such the BEATRICE R16 is fully compatible with other manufacturers’ equipment using the Dante and/ or AES67 protocols.

This 1RU rackmount intercom was designed to be very easy to use for the operator and simple to set up for the technician. It includes all the basic functionality required for small intercom systems and none of the overly complex installation requirements normally associated with large systems.

The Cloud CV Series includes 3 models - CV2500, CV4250, and CV8125

Cloud CV digital amplifiers are versatile multi-channel power amplifiers of advanced design, able to drive 100 V/70 V line loudspeaker systems directly. They are ideal for sound reinforcement applications in the retail, leisure, hospitality, commercial or industrial sectors. Large installations using multiple amplifiers will benefit from the amplifiers’ network connectivity: each amplifier may be configured individually, controlled and monitored remotely over a standard Ethernet network.

All models include on-board, user-configurable DSP permitting great flexibility of internal architecture, and a wide variety of remote control options including Ethernet, RS-232 and DC: the latter providing compatibility with standard Cloud remote control plates. An important aspect of the design is that “out of the box”, the amplifiers emulate earlier Cloud amplifier designs. It is not necessary to either connect a computer nor remove the lid to access internal jumpers to set primary configuration parameters such as input routing, which may be done using rear panel DIP switches. Where more advanced configuration options are needed, they can be easily accessed through the internal web server and an Ethernet connection to an external device.

The A168D Stage is a portable 16 input 8 output I/O Expander, again using the Dante network protocol to provide additional I/O anywhere on a network. It comes with 16 mic preamps on XLR inputs with Phantom Power status LEDs and 8 XLR line outputs with direct preamp control from the 4REA4 controller software. It runs at 48k and 96k and is AES67 compatible. Primary and secondary ports again come with locking EtherCON connectors and can run in redundant or switched mode.

The A164D Wall LCD is a 16 input 4 output I/O Expander that uses the Dante network protocol to provide fixed, additional I/O anywhere on a network and is designed for wall or floor mounting. It comes with 16 Mic Preamps on XLR inputs with Phantom Power status LEDs and four XLR Line Outs with direct preamp control from the 4REA4 controller software. It can run at both 48K and 96k sample rates and it is AES67 compatible. Primary and secondary Dante ports come with locking EtherCON connectors and can run in both redundant and switched mode. All LCD labels are dimmable and can be customised using Dante controller software.

16-channel Remote-control Ethernet Mic Preamp

The Millennia HV-316 is a cutting-edge 16-channel remote-control Ethernet mic preamp designed for adverse environments and mission-critical applications such as live touring rigs, scoring stages, remote recording trucks, sample houses, hot-rack installs, schools, churches, networked music venues, location recording, outdoor facilities, and multi-room studio complexes. The HV-316’s road-ready, lightweight military-spec aluminum 1U chassis houses 16 channels of legendary Millennia HV-3 mic preamps with simultaneous analog and Dante 32-bit/192kHz Ethernet outputs.

Designed for adverse environments and mission-critical applications

Extensive RF shielding is provided on audio and digital feeds to eliminate the possibility of cellular interference. Designed to withstand continuous operating temperatures up to 150° F, the HV-316 can be powered by both 12VDC and worldwide 90–240V AC with fail-safe operation. The HV-316’s medical-grade, redundant power supply is rated for 650,000 hours MTBF operation. If one power supply fails, the other supply continues operating without audio glitches.

Acclaimed Millennia remote preamps

Millennia remote preamps can seamlessly operate on a single Ethernet network — up to 384 redundant audio channels — letting you remotely control Gain, Polarity, Pad, Mute, channel Linking, HPF, and selectable ribbon or phantom paths on every channel. You also have unlimited scene recall scripting and virtual scribble-strips.

Next-gen 192kHz A/D conversion

The HV-316 uses 16 channels of meticulously integrated, next-generation AKM 192kHz A/D converters, multi-paralleled for extreme dynamic range performance and acclaimed Millennia sonics. All internal processing is achieved via a generic plug-and-play Linux Beagle processor to ensure non-obsolescence and easy field replacement. To say that engineers at Sweetwater are impressed with the Millennia HV-316 would be an understatement. With its bulletproof build, audiophile sonics, and innovative remote control capabilities, it’s a stunning technological achievement.

Millennia HV-316 16-channel Remote Control Ethernet Mic Preamp Features:

• 16 Millennia HV-3 remote mic preamps
• Up to 384 redundant audio channels on a single Ethernet network
• Next-gen AKM 192kHz A/D converters with 32dBu of input headroom
• Designed for 65° C (150° F) continuous operating temperature
• Powered by both 12VDC and worldwide 90–240VAC. Fail-safe operation
• Extensive RF shielding provided on audio and digital feeds to eliminate cellular interference
• Medical-grade, redundant power supply rated for 650,000 hours MTBF operation
• Road-ready, lightweight military-grade aluminum 1U chassis
• Mirror-polish, black finish on extruded machined aluminum front panel

This capable and flexible device is suited to many applications and installation types. Its ruggedized, small form factor makes it ideal for ride vehicles and parade floats, Showmaster Go combines a Pro version Medialon show controller with 16 channels of Dante network audio output.

Medialon Show Controller
Running Medialon Manager V7 show control software, this little box packs a lot of punch when it comes to controlling audio, video, lighting, animatronics, special effects, interfacing with PLCs and ride controllers, and synchronizing to multiple time sources.

Unlimited audio playback potential
Synchronized and asynchronously triggered audio playback are possible, mixed into the same Dante output channels. There is no limit to the polyphonic audio layering possible on Showmaster Go. You can have as many Players as you want. Add more storage capacity beyond the built-in SSD with USB 3.0 drives or a network file server.

Connects to PLCs and ride controllers
Showmaster Go connects to PLCs via the network, simplifying show triggers and feedback to ride control, motion control, and show action equipment control systems.

Shock Resistant, Heat Resistant Hardware
The only moving part is a small cooling fan, so the shock and vibrations you’d expect on a ride vehicle or parade float are no sweat for Showmaster Go. With the optional shock mount, you can throw even rougher conditions at it!

Adaptable to the Size of Your Show
Need more audio output channels? Upgrade from 16 to 32 or 64 channels. Only need one Timeline? Downgrade to Manager V7 Lite. Customize the software licensing to the needs of your show.

Antelope Audio’s first Dante interface is also the world’s first 64-channel AD/DA converter. Featuring all industry-standard analog and digital I/O within a 2U rack space, including 64 channels of analog in and 64 channels of analog out, Thunderbolt™ 3, DANTE, AES/EBU, HDX and MADI, the GALAXY 64 is equipped to handle all audio going in and out of your production facility or live venue.

The GALAXY 64 is a Synergy Core interface running both ARM DSP + FPGA chips, all in custom configurations, processing tens of input/output audio streams, and hundreds of low latency studio effects, all without burdening your CPU. With a total of 12x ARM DSP + 3x FPGA units on-board, a single GALAXY 64 can handle large sessions with hundreds of FX instances applied to each individual project, while employing a 3rd FPGA chip to process the routing matrix and manage conversion.

Designed for world class studio recording, live venues, post-production, broadcast, large-scale scoring, and other enterprise applications, GALAXY 64 fits 64 channels of all-encompassing connectivity, class leading signal processing, and rock-solid reliability inside a single 2U rackmount unit.

Rack mountable 16-port 40w PoE audio quality switch designed for use in Dante Networks. In addition to the 16 Ethernet ports, the STNet-Switch II includes two SFP ports that can be adapted to fiber or high speed Ethernet connections. The two SFP ports can be turned into a high speed optical fiber ports or copper Ethernet ports with the addition of a Gigabit SFP transceiver module.

Features:

• 10M/100M/1G RJ45 PORT: QTY 16.
• 100M/1G SFP PORT: QTY 2
• PROPRIETY (PoE+ 40W)
• STORAGE TEMPERATURE: -20C to 70C
• IEEE802.af (PoE 15.4W)
• IEEE802.3at (PoE+ 30W)
• AVAILABLE PoE POWER: 640W
• OPERATING TEMPERATURE: 0C to 40C
• OPERATING HUMIDITY: 10 to 90% RH
• STORAGE HUMIDITY: 10 to 90% RH
• AC INPUT: 100V-240V

The all-new CloudPower series is a professional amplifiers series with feature built-in DSP and remote control over the cloud – securely. Log in to APEX Cloud and remotely-manage your amplifiers from your office. Save time and money by monitoring performance and adjusting functions without the need for a site visit.

• Remote management over the APEX Cloud
• WebUI with build-in Wi-Fi Hotspot
• Powerful 4 channel amplifier up to 3000W per channel
• Features a built-in web-based Intelli-Ware DSP
• High-efficiency and low idle power

Model numbers:

• CP354
• CP704
• CP1505
• CP3004

Nixer's PLR64 is specifically designed to allow an operator/commentator to access any two independently selectable sources on the Dante network via a simple remote control panel. Each display shows Channel Name and provides an output meter level. Balanced XLR outputs provide feeds to local speakers or headphones. Perfect for on-air and live applications where critical confidence monitoring is essential

A 1U 19inch rack mounted Dante monitoring and mixing unit, which allows two modes of operation a mixing mode which can mix up to 64 Dante channels at 48kHz (32 channels at 96kHz) plus microphone input (via headphone connector) and AES input to create a 67 into 2 mixer. Alternatively, it can be set into a simple Listen mode where touching a channel instantly routes to the LR output and cancels any previous selection.

The outputs of the LR bus are presented to the user via the inbuilt 4mm x 9mm full range speakers or via the 3.5mm headphone jack. The speakers are automatically muted when a headphone jack is inserted. Simultaneous outputs are also available in the form of the stereo balanced line outputs and AES output accessed via XLR connectors on the rear of the RL64 Dante. The mix output is also routed to the Dante output. The RL64 Dante is operated and controlled via the large letterbox 6.6” diagonal (168mm) 1440 x 240 24-bit colour LCD and capacitive touch panel. A simple and elegant menu system has been designed to be intuitive to navigate allowing the user to access all the features of the RL64 Dante very quickly.

The high-resolution screen is easy to read presenting comprehensive metering, routing and status information to the user.

The ABX-6 Dante breakout box can be equipped with up to two 1000Base-X fiber transceivers (SFP module). That allows for redundant applications via fiber optical cable. Additionally, it has two 1000Base-T ethernet connections. Thus, ABX-6 supports a convenient connection to Focus Venue, Focus Modular or DI Amplifiers over long distances.

Main features

• SFP ports for 1000Base-X fiber transceiver (Dante Primary und Secondary)
• 1000Base-T Ethernet connections (Dante Primary und Secondary)
• Up to eight audio channels: 2 × AES/EBU, 2 × Airea connect
• Fohhn Net control signals are transmitted over ethernet
• Integrated Dante Brooklyn II module

The Glensound BEATRICE D8+ is a versatile and fully featured 8 channel desktop intercom with crystal clear audio designed for broadcast,theatre and professional audio applications.

It is part of the Beatrice intercom system that utilizes the reliable and proven Dante network audio transmission protocol to allow real time distribution of uncompressed audio across standard networks, it is also AES67 compliant. As such the BEATRICE D8+ is fully compatible with other manufacturers’ equipment using the Dante and/ or AES67 protocols.

This desktop intercom was designed to be very easy to use for the operator and simple to set up for the technician. It includes all the basic functionality required for small intercom systems and none of the overly complex installation requirements normally associated with large systems.

The Iyo Dante® is a cost-effective family of microphone/line Dante audio-over-IP (AoIP) interfaces in a 1U rack mount format. The 0.32LR provides 32 balanced outputs. the output levels are configurable up to +24dBu. With RJ-45/StudioHub + GPIO Connector close-up.

RGB LEDs on the Iyo’s front panel show per channel audio levels and streaming status.

The Iyo family feature an embedded web server, allowing configuration and monitoring of input and output levels. Routing is achieved using the Dante Controller.

Power is provided from a built-in universal AC power supply. Redundant power is available using an external 12VDC supply via a locking 2.1mm jack.

The Iyo Dante® is a cost-effective family of microphone/line Dante audio-over-IP (AoIP) interfaces in a 1U rack mount format. The 32.0MR provides 32 balanced analog audio inputs and 0 outputs. Each input accommodates microphone through line level signals with a gain range of -60 to +24dBu. +48V phantom power is individually switchable on each input. With RJ-45/StudioHub + GPIO Connector close-up.

RGB LEDs on the Iyo’s front panel show per channel audio levels and streaming status.

The Iyo family feature an embedded web server, allowing configuration and monitoring of input and output levels. Routing is achieved using the Dante Controller.

Power is provided from a built-in universal AC power supply. Redundant power is available using an external 12VDC supply via a locking 2.1mm jack.