Fohhn – DLI-430 DAN


More details

Similar Products

aimline-alx8-dante_1200px|aimline-alx8-dante_1200px
  • Aimline

Aimline – ALX 8.0 DANTE

The Aimline ALX8 DANTE is a digital steerable active column-speaker with DANTE®-Input. The Aimline ALX4 DANTE is a digital steerable active column-speaker with DANTE®-Input. A separate digital amp with its own digital signal processor drives each of the components. This technology gives the benefit of being able to aim the acoustical energy up and down the room. This avoids energy waves hitting any walls, windows, glass and other hard surfaces resulting in unwanted reflections. The internal digital signal processor also enables a compressor, a gate, a 10-band-parametric equalizer and a delay to be placed into the audio-input path. With simple Windows-software every parameter can be set in real time. All speakers are recognized within a network by their IP-address. ALX-cabinets can be fully monitored for surveillance-issues. Thanks to its very small and unobtrusive enclosure the AIM­LINE-Speaker is a fit for most architecturally sensitive environment including mu­seums, churches, conference-rooms and many more challenging spaces and environments. With its two-channel DANTE®-input integration into existing IP-networks as well as a direct integration to other DANTE®-enabled products is simple.
    Speakers
  • Dante Ch: 2x2
  • AES67 Enabled
CMX 2-way Dante Loudspeaker
  • CMX

CMX – DANTE-A10

The CMX DANTE-A10 is a 10" 2-way Dante Loudspeaker.

  • Self-powered network loudspeaker.
  • Ethernet and RS-232 control.
  • Dante™ Network Audio Interface.
  • 13-Ply Russia birch apply/15mm Russia birch plywood.
  • Full integration with other Dante™ enabled mixer, amplifier and controller.
  • Ultra-light voice coil and top class driver units for acoustic optimization.
  • 90°x 60° of horizontal and vertical wide angle dispersion.
  • Heavy duty structure suitable for long year application.
  • Versatile hanging mount, floor stand or wall mount installation.
    Speakers
K-array_-_KMT12_Mark_I_800pxl|K-array_-_KMT12_Mark_I_800pxl
  • K-array

K-array – KMT12 Mark I

KMT12 is much more than a standard 12" powered subwoofer. The amplifier mounted onboard is Class D, delivering 2 x 1000 W at 8 Ohm. KMT12 is much more than a standard 12" powered subwoofer. The amplifier mounted onboard is Class D, delivering 2 x 1000 W at 8 Ohm. The unique four-corner port configuration gives symmetrical back loading to the speaker for extended bass response with very low distortion. This also gives incredible structural strength to the cabinet despite its light weight. The rear panel provides input for a balanced line signal, a balanced microphone signal with phantom power and digital signals in AES/EBU protocol and also on an XLR for ease of cabling.  
    Speakers
  • Dante Ch: 2x2
  • 48kHz-96kHz