Dante-enabled Product Catalog

64 In / 64 Out Thunderbolt™ 2 and Pro Tools | HD™ compatible audio interface, with Dante networking audio connectivity. 64 In / 64 Out Thunderbolt™ 2 and Pro Tools | HD™ compatible audio interface, with Dante networking audio connectivity. Red 8Pre features both Thunderbolt 2 connectivity and dual mini-DigiLink ports allowing you the best of both Core Audio and Pro Tools|HD workflows. Take Red 8Pre on the road for location recording over Thunderbolt then connect the same interface to Pro Tools|HDX or Pro Tools|HD Native back at the studio for mixdown. The combination of low-latency conversion and driver technology allows real-time foldback mixes to be created in the DAW while you continue to use your native plug-ins. Unlike many interfaces, both mini-DigiLink and Thunderbolt 2 connectivity comes as standard, so there’s no need to buy an additional option card.

The hs-221 is a dual 21 inch ACM subwoofer system. The hs-221 utilizes VUE’s revolutionary Active Compliance Management (ACM) technology to reset the size-toperformance benchmark for subwoofer systems. The combination of ACM technology and the hs-221’s highly sophisticated on-board electronics result in massive amounts of pure, clean low-frequency energy from a dual 21-inch configuration that embodies a significantly smaller enclosure than other dual 21-inch designs.  The hs-221 is a dual 21 inch ACM subwoofer system. The hs-221 utilizes VUE’s revolutionary Active Compliance Management (ACM) technology to reset the size-toperformance benchmark for subwoofer systems. The combination of ACM technology and the hs-221’s highly sophisticated on-board electronics result in massive amounts of pure, clean low-frequency energy from a dual 21-inch configuration that embodies a significantly smaller enclosure than other dual 21-inch designs. 

• Ideal for Large Format Touring, Dance Clubs, and EDM Events
• 143 dB SPL peak output in free field (149 db SPL half space environment – ground plane)
• Flat Response down to 25 Hz in ELF (Extended Low Frequency Mode)

ACTIVE COMPLIANCE MANAGEMENT (ACM™) Patent-pending hybrid design combines both band-pass and vented alignments into a single, compact footprint for more output and definition. ABUNDANCE OF HORSEPOWER Onboard amplifier supplies 1000W pure sine wave power (2500W “peak” power) to each woofer. PURPOSE-DESIGNED TRANSDUCERS Dual 21-inch, long-excursion woofers with 5-inch (125 mm) voice coils. SYSTEMVUE™ SOFTWARE Mac, Windows and iOS compatible software provides access to monitor and control parameters such as fully parametric EQ, input/output levels, volume, mute, delay and input sources. STANDARD IP FOR EASY NETWORKING ON-BOARD Simply plug in, and the system automatically connects to virtually any kind of IP configuration. BUILT FOR THE ROAD Premium birch plywood enclosure with extensive internal bracing and a highly-durable Dura Coat finish.  hs-221’s are equipped with two RJ-45 Ethernet connectors (with an internal switch for loop through network connections). The hs-221 supports remote control and monitoring over ethernet via SystemVUE software. The Ethernet connection also can be used for Dante audio input.

The Extron AXI 22 AT is a quarter rack width audio interface for integrating two mic/line sources onto a Dante™-enabled audio system. The Extron AXI 22 AT is a quarter rack width audio interface for integrating two mic/line sources onto a Dante™-enabled audio system. It features two mic or line inputs on a 3.5 mm captive screw connector, with switchable 48 volt phantom power. Input select, gain, and phantom power settings are controllable from the front panel, via DSP Configurator Software, or by SIS command. The AXI 22 AT also features two line level outputs for routing any two Dante channels from the network to the audio system. The AXI 22 AT interfaces with any Dante-equipped audio processor,  and can be powered through PoE.

The Extron AXI 44 AT is a quarter rack width audio interface for integrating four mic/line sources onto a Dante™-enabled audio system.  The Extron AXI 44 AT is a quarter rack width audio interface for integrating four mic/line sources onto a Dante™-enabled audio system. It features four mic or line inputs on 3.5 mm captive screw connectors, with switchable 48 volt phantom power. Input select, gain, and phantom power settings are controllable from the front panel, via DSP Configurator Software, or by SIS command. The AXI 44 AT also features four line level outputs for routing any four Dante channels from the network to the audio system. The AXI 44 AT interfaces with any Dante-equipped audio processor, and can be powered via PoE.

The NBB-1616 is a fully digitized 16 x 16 Break-in/Break-out box which bidirectionally streams multi-channel audio throughout off-the-shelf Ethernet cables and switches. The NBB-1616 is designed to be operated friendly and installed easily as well as system scalable and upgradable. The NBB-1616 is a fully digitized 16 x 16 Break-in/Break-out box which bidirectionally streams multi-channel audio throughout off-the-shelf Ethernet cables and switches. The NBB-1616 is designed to be operated friendly and installed easily as well as system scalable and upgradable. The front panel features 16 clip-hold PPM meters for all the input or output channels. And you can control audio and phantom power engagement for all the input locally on the front panel.

The ML 12 D is a self-Powered Subwoofer with built-in 24/96 DSP, Analog, AES3 and Dante I/O. The ML 12 D is a self-Powered Subwoofer with built-in 24/96 DSP, Analog, AES3 and Dante I/O.  In addition to legendary Amadeus reliability and sonic excellence, ML 12 D incorporates a newly refined Dante I/O section, offering options for full integration with leading third-party networking.

The ML 15 D is a self-powered subwoofer with built-in 24/96 DSP, Analog, AES3 and Dante I/O. The ML 15 D is a self-powered subwoofer with built-in 24/96 DSP, Analog, AES3 and Dante I/O. In addition to legendary Amadeus reliability and sonic excellence, ML 15 D incorporates a newly refined Dante I/O section, offering options for full integration with leading third-party networking.

The ML 18 D is a self-powered subwoofer with built-in 24/96 DSP, Analog, AES3 and Dante I/O. The ML 18 D is a self-powered subwoofer with built-in 24/96 DSP, Analog, AES3 and Dante I/O. In addition to legendary Amadeus reliability and sonic excellence, ML 18 D incorporates a newly refined Dante I/O section, offering options for full integration with leading third-party networking.

The Digital 6000 is Sennheiser's first digital two channel solution in one rack. Digital 6000 features Digital 9000’s unparalleled long range transmission mode, coupled with a massive 244 MHz of switching bandwidth.  The Digital 6000 is Sennheiser's first digital two channel solution in one rack. Digital 6000 features Digital 9000’s unparalleled long range transmission mode, coupled with a massive 244 MHz of switching bandwidth. The innovative user interface makes it easier to use. Sennheiser’s True Bit Diversity and predictive algorithms create a reliable wireless link which remains stable when other systems fail. The Digital 6000 components:

• EM 6000
• SK 6000
• L 6000
• SKM 6000

The NT110 is a portable digital audio mixer with inherited reliability and features of the NT880, TAMURA’s Flagship model. The NT110 is a portable digital audio mixer with inherited reliability & features of the NT880, TAMURA’s Flagship model.

• Analog 16 Input/Output (MONO), AES 2 Input/Output (STEREO), & AUX 2 (STEREO) as standard
• Audio formats such as AES, MADI, SDI, DANTE can be linked with NT016 via 2 expansion slots (optional)
• External Remote Control for Input/Output can be achieved via GPIO cards installed in the expansion slots for various applications
• Compact design mountable in a EIA 19 inch width rack
• Sampling Frequency;48K/96KHz, selectable for High-quality audio program production
• Availability of Power redundancy which is a prime requirement for live broadcasting events for the highest reliability
• Audio digital signal processing redundancy despite of the size of portable mixer. (option)

The cutting-edge PPA T45 NET D transmitter offers control or monitoring capability from any remote location, Dante™ input, multiple digital audio input options, and an OLED high-resolution screen with easy-to-manage menu navigation.  The cutting-edge PPA T45 NET D transmitter offers control or monitoring capability from any remote location, Dante™ input, multiple digital audio input options, and an OLED high-resolution screen with easy-to-manage menu navigation. Features 3 powerful microprocessors and the same high-quality audio and RF performance you’ve come to expect from Williams Sound. It’s technology that takes the guesswork out of complex audio installation. Simply select among voice, music, or hearing assistance in the application preset menu, and this transmitter quickly configures itself. With a range of up to 1000 feet, the PPA T45NET D is ideal for large venues where superior coverage is essential. System includes: PPA T45NET D transmitter (1) ANT 025 antenna (1) TFP 048 power supply (1) WLC 004 Main Power Cord (U.S.) (1) WCA 013 RCA Audio Cable, 3ft. *All items can be purchased separately

The Digi-Loop’s amplifier design offers dual 12 A rms loop outputs for perimeter loop(s), single array(s), dual loop, or phased-array configuration. A 70-100 V input provides connection to a distributed speaker/paging system, ensuring announcements are heard by loop users. Digi-Loop is definitely state-of-the-art – the first of its kind to maximize modern amplifier technology. Its network-control capability provides seamless, remote system set-up, operation and monitoring via laptop or tablet. DSP audio processing offers flexible, powerful software control of mixing, equalization, compression and more. Powerful Class D, pulse-width amplifiers maximize efficiency. The Digi-Loop’s amplifier design offers dual 12 A rms loop outputs for perimeter loop(s), single array(s), dual loop, or phased-array configuration. A 70-100 V input provides connection to a distributed speaker/paging system, ensuring announcements are heard by loop users. System includes: (1) DL 210 NET D 2.0 Loop Amplifier (1) WLC 004 Line Cord (US) (1) IDP 009 ADA Wall Plaque (t-coil)

The Digi-Loop’s amplifier design offers either single or dual 9.5 A rms loop outputs for perimeter loop(s), single array(s), dual loop, or phased-array configuration. A 70-100 V input provides connection to a distributed speaker/paging system, ensuring announcements are heard by loop users.   Digi-Loop is definitely state-of-the-art – the first of its kind to maximize modern amplifier technology. Its network-control capability provides seamless, remote system set-up, operation and monitoring via laptop or tablet. DSP audio processing offers flexible, powerful software control of mixing, equalization, compression and more. Powerful Class D, pulse-width amplifiers maximize efficiency. The Digi-Loop’s amplifier design offers either single or dual 9.5 A rms loop outputs for perimeter loop(s), single array(s), dual loop, or phased-array configuration. A 70-100 V input provides connection to a distributed speaker/paging system, ensuring announcements are heard by loop users. system includes (1) PLA DL207 NET D Loop Amplifier (1) WLC 004 Line Cord (US) (1) IDP 009 ADA Wall Plaque (t-coil)

The Digi-Loop’s amplifier design offers either single or dual 9.5 A rms loop outputs for perimeter loop(s), single array(s), dual loop, or phased-array configuration. A 70-100 V input provides connection to a distributed speaker/paging system, ensuring announcements are heard by loop users. Digi-Loop is definitely state-of-the-art – the first of its kind to maximize modern amplifier technology. Its network-control capability provides seamless, remote system set-up, operation and monitoring via laptop or tablet. DSP audio processing offers flexible, powerful software control of mixing, equalization, compression and more. Powerful Class D, pulse-width amplifiers maximize efficiency. The Digi-Loop’s amplifier design offers either single or dual 9.5 A rms loop outputs for perimeter loop(s), single array(s), dual loop, or phased-array configuration. A 70-100 V input provides connection to a distributed speaker/paging system, ensuring announcements are heard by loop users. system includes (1) PLA DL107 NET D Loop Amplifier (1) WLC 004 Line Cord (US) (1) IDP 009 ADA Wall Plaque (t-coil)

Rack-mountable 16-port 40W PoE switch for use with SoundTube's Dante-enabled in-ceiling and surface-mount speakers. The STNet-Switch is a 16-port, 40 watt PoE switch designed for use with SoundTube's Dante-enabled speakers. (The speakers may also be used with a standard PoE or PoE Plus switch.) The STNet-Switch provides 40 watts Power over Ethernet to each SoundTube speaker on the network and manages report-back information from the speakers. A Dante system controller DSP is connected to the STNet-Switch via one of the two provided gigabit Ethernet ports; up to 16 speakers may be connected directly via one switch. Multiple switches may be linked via the second gigabit Ethernet port

AVDT-BOB-ADE8IO is a compact Dante analog break-out box with embedded Digital Signal Processing. It provides two state-of-the-art analog microphone preamplifiers inputs, two analog line outputs, one stereo AES/EBU input, one AES/EBU output and four GPIOs on terminal block connectors. AVDT-BOB-ADE8IO is a compact Dante analog break-out box with embedded Digital Signal Processing. It provides two state-of-the-art analog microphone preamplifiers inputs, two analog line outputs, one stereo AES/EBU input, one stereo AES/EBU output and four GPIOs on terminal block connectors. Embedded DSP allows for full mixing of the four Dante inputs/outputs, the two analog inputs/outputs and the four AES/EBU inputs/outputs plus effects like parametric equalization, dynamic compression and fine pitch digital gain adjustment. Four analog/digital GPIOs allows for hardware remote control of the device (e.g. volume control via potentiometer). Two Gigabit switched ports allows for daisy-chained connection without any bandwidth bottleneck. One port provides Power-Over-Ethernet for direct power supply. The embedded dual core processor runs a Web 2.0 server with user-friendly interface for multiplatform remote control over IP (iOS, Android, Windows, Mac OS, Linux). Accessories like long-ears kit allows for mounting of up to three AVDT-BOB on 1U 19” rack.

AVDT-BOB-ADX8IO is a compact Dante analog break-out box with embedded Digital Signal Processing. It provides two state-of-the-art analog microphone preamplifiers inputs and two analog line outputs on XLR connectors, plus stereo AES/EBU input/outputs and four GPIOs on DB25 connector. AVDT-BOB-ADX8IO is a compact Dante analog break-out box with embedded Digital Signal Processing. It provides two state-of-the-art analog microphone preamplifiers inputs and two analog line outputs on XLR connectors, plus stereo AES/EBU input/outputs and four GPIOs on DB25 connector. Embedded DSP allows for full mixing of the four Dante inputs/outputs, the two analog inputs/outputs and the four AES/EBU inputs/outputs plus effects like parametric equalization, dynamic compression and fine pitch digital gain adjustment. Four analog/digital GPIOs allows for hardware remote control of the device (e.g. volume control via potentiometer). Three Gigabit switched ports allows for daisy-chained/star connection without any bandwidth bottleneck. Neutrik port provides Power-Over-Ethernet for direct power supply. SFP ports accept multi-mode or single-mode fibers, allowing to link devices on distances up to 20km. The embedded dual core processor runs a Web 2.0 server with user-friendly interface for multiplatform remote control over IP (iOS, Android, Windows, Mac OS, Linux). Accessories like long-ears kit allows for mounting of up to three AVDT-BOB on 1U 19” rack.

The IPD4-CM62-BGM is a 6.5-inch in-ceiling Dante speaker with connection and power for up to three additional non-Dante SoundTube speakers. The IPD4-CM62-BGM gives integrators an economical way to expand in-ceiling speaker zones on a Dante network. This speaker incorporates a 6.5-inch (165 mm) polypropylene woofer with rubber surround and 1-inch (25 mm) silk dome tweeter in a ported steel backcan. In addition to its PoE connection to the SoundTube STNet Switch, the IPD4-CM62-BGM can power up to three additional non-IP speakers. Each IPD4 speaker can be broken down into 2 channels; IPD4 speakers are matched in a system with standard passive SoundTube speakers of the same type. All IPD4 speakers come in both an active and a passive version. As with SoundTube's other IPD in-ceiling speakers, IPD4 speakers feature BroadBeam Ring technology for broad, even dispersion of high frequencies and include SoundTube's exclusive SpeedWing quick-mounting technology.

The IPD4-CM52-BGM is a 5.25-inch in-ceiling Dante speaker that includes connection for up to three additional non-Dante SoundTube speakers. The IPD4-CM52-BGM gives integrators an economical way to expand in-ceiling speaker zones on a Dante network. This speaker incorporates a 5.25-inch (134 mm) polypropylene woofer with rubber surround and 0.75-inch (19 mm) silk dome tweeter in a ported steel backcan. In addition to its PoE connection to the SoundTube STNet Switch, the IPD4-CM52-BGM can power up to three additional non-IP speakers. Each IPD4 speaker can be broken down into 2 channels; IPD4 speakers are matched in a system with standard passive SoundTube speakers of the same type. All IPD4 speakers come in both an active and a passive version. As with SoundTube's other IPD in-ceiling speakers, IPD4 speakers feature BroadBeam Ring technology for broad, even dispersion of high frequencies and include SoundTube's exclusive SpeedWing quick-mounting technology.

The IPD-SM500i-II is a 5.25-inch coaxial surface-mount speaker with BroadBeam waveguide technology, biamplified. The IPD-SM500i-II incorporates a 5.25-inch (133 mm) polypropylene woofer and 1-inch (25 mm) convex titanium tweeter, with SoundTube's patented BroadBeam waveguide technology for broad, even dispersion of high frequencies. The speaker enclosure is constructed of injection-molded, glass-reinforced ABS with a powder-coated aluminum grille and features SoundTube's proprietary Stealth mounting system that allows for tool-free horizontal and vertical aiming, while keeping the speaker close to the wall. A safety cable with speaker mounting bolt, Euroblock connector, wall mount bracket and terminal weather boot are included with each speaker. This 40-watt bi-amplified speaker includes DSP and Dante for audio distribution and report-back on speaker condition. 

The IPD-CM82-BGM is a 8-inch (203 mm) in-ceiling speaker with 1-inch (25 mm) silk dome tweeter, ported, with a steel backcan. The IPD-CM82-BGM is an in-ceiling ported speaker for music and paging. It incorporates an 8-inch (203 mm) polypropylene woofer with rubber surround and 1-inch (25 mm) silk dome tweeter, bi-amped, with DSP and Dante for audio distribution and report-back on speaker condition. SoundTube's proprietary BroadBeam Ring technology ensures broad dispersion of high frequencies. The speaker is enclosed in a drawn steel backcan with SoundTube's exclusive SpeedWing quick-mounting system, and incorporates a paintable steel grille. A color-coded tile bridge, UL listed conduit clamp and paint shield are included with each speaker. The IPD-CM82-BGM is UL 60065 and 2043 listed.

The IPD-CM62-BGM is a 6.5-inch (165 mm) in-ceiling speaker with 1-inch (25.4 mm) silk dome tweeter, ported, with a steel backcan. The IPD-CM62-BGM is an in-ceiling ported speaker for music and paging. It incorporates a 6.5-inch (165 mm) polypropylene woofer with rubber surround and 1-inch (25.4 mm) silk dome tweeter, bi-amped, with DSP and Dante for audio distribution and report-back on speaker condition. SoundTube's proprietary BroadBeam Ring technology ensures broad dispersion of high frequencies. The speaker is enclosed in a drawn steel backcan with SoundTube's exclusive SpeedWing quick-mounting system, and incorporates a paintable steel grille. A color-coded tile bridge, UL listed conduit clamp and paint shield are included with each speaker. The IPD-CM62-BGM is UL 60065 and UL2043 listed.

The IPD-CM52-BGM is a 5.25-inch (134 mm) in-ceiling speaker with 0.75-inch (19 mm) silk dome tweeter, ported, with a shallow steel backcan that allows placement in narrow spaces. The IPD-CM52-BGM is an in-ceiling ported speaker for music and paging. It incorporates a 5.25-inch (134 mm) polypropylene woofer with rubber surround and 0.75-inch (19 mm) silk dome tweeter, bi-amped, with DSP and Dante for audio distribution and report-back on speaker condition. SoundTube's proprietary BroadBeam Ring technology ensures broad dispersion of high frequencies. The speaker is enclosed in a shallow-depth drawn steel backcan with SoundTube's exclusive SpeedWing quick-mounting system, and incorporates a paintable steel grille. A color-coded tile bridge, UL listed conduit clamp and paint shield are included with each speaker.

The IPD-CM52-BGM is a 5.25-inch (134 mm) in-ceiling speaker with 0.75-inch (19 mm) silk dome tweeter, ported, with a steel backcan. The IPD-CM52-BGM is an in-ceiling ported speaker for music and paging. It incorporates a 5.25-inch (134 mm) polypropylene woofer with rubber surround and 0.75-inch (19 mm) silk dome tweeter, bi-amped, with DSP and Dante for audio distribution and report-back on speaker condition. SoundTube's proprietary BroadBeam Ring technology ensures broad dispersion of high frequencies. The speaker is enclosed in a drawn steel backcan with SoundTube's exclusive SpeedWing quick-mounting system, and incorporates a paintable steel grille. A color-coded tile bridge, UL listed conduit clamp and paint shield are included with each speaker.

The DMB-4K-I-HD-DNT is an input blade designed for use with any blade-based Crestron® DigitalMedia™ Switcher. It provides eight independent HDMI® inputs with complementary analog audio inputs and Dante™ audio networking.  The DMB-4K-I-HD-DNT is an input blade designed for use with any blade-based Crestron® DigitalMedia™ Switcher. It provides eight independent HDMI® inputs with complementary analog audio inputs and Dante™ audio networking. Each HDMI input handles Full HD 1080p, Ultra HD, 2K, and 4K video signals with support for HDCP 2.2, Deep Color, 3D, and high-bitrate 7.1 audio. Support for Dante audio networking allows for interfacing with other Dante enabled equipment over the local area network to send and receive streaming stereo audio on any or all input channels. The analog audio inputs are enabled using the optional Analog Audio Breakout Box, which provides support for balanced or unbalanced stereo line-level signals. Analog Audio Embedding Each HDMI input on the DMB-4K-I-HD-DNT is accompanied by a balanced analog audio input, allowing stereo analog audio signals to be embedded with the digital video signal. The analog audio inputs are enabled using the optional Analog Audio Breakout Box (model AUD-BOB-1602). Dante™ Audio Networking Dante networking enables streamlined integration with Crestron Avia™ DSP products and other Dante enabled audio sources, processors, mixers, and switchers. Dante allows stereo audio input signals to be received over an Ethernet network and embedded with the video input signal from any of the blade’s HDMI inputs. Send/return loop capability is also supported, allowing audio from any HDMI or analog input to be externally processed, mixed, or switched via Dante, and then re-embedded with the video signal within the DM switcher. The Dante network interface is provided via the DM switcher’s LAN port, supporting up to 120 simultaneous stereo input and output signals. CEC Embedded Device Control DigitalMedia offers an alternative to conventional RS-232 and IR display control by harnessing the CEC (Consumer Electronics Control) signal embedded in HDMI. Through its connection to a control system (via the DM switcher), the DMB-4K-I-HD-DNT provides a gateway for controlling display devices right through their HDMI connections, potentially eliminating the need for any dedicated control wires or IR emitters.

The DMB-4K-O-HD-DNT is an output blade designed for use with any blade-based Crestron® DigitalMedia™ Switcher. It provides eight independent HDMI® outputs with complementary analog audio outputs and Dante™ audio networking.  The DMB-4K-O-HD-DNT is an output blade designed for use with any blade-based Crestron® DigitalMedia™ Switcher. It provides eight independent HDMI® outputs with complementary analog audio outputs and Dante™ audio networking. The HDMI outputs are each capable of handling Full HD 1080p, Ultra HD, 2K, and 4K video signals with support for HDCP 2.2, Deep Color, and high-bitrate 7.1 audio. Built-in 4K scaling enables the devices connected to each HDMI output to handle any video resolution from NTSC 480i to 4K DCI. DVI signals are also supported using HDMI-to-DVI adapters or interface cables. Support for Dante audio networking allows for routing of stereo audio output signals to other Dante enabled equipment over the local area network. The analog audio outputs are enabled using the optional Analog Audio Breakout Box (model AUD-BOB-1602), which provides support for balanced or unbalanced stereo line-level signals. 4K/60 Scalers An independent, high-performance 4K scaler is provided at each output to ensure that input sources of any resolution or frame rate can be routed and displayed reliably on virtually any display device without compromising the original input signal. As part of a DM® switcher with many outputs, this allows any video or computer source to be viewed simultaneously on multiple disparate displays, scaling the signal up or down to match the native resolution of each display. No matter what source is selected, or where it’s routed, the DMB-4K-O-HD-DNT helps to ensure an optimal image on every screen. It can take any input resolution from standard definition NTSC 480i to ultra high-definition 4K DCI, and scale it beautifully to any output resolution up to 4K DCI (4096 x 2160 @ 60 Hz). Interlaced sources are converted to progressive scan using motion-adaptive deinterlacing. Intelligent frame rate conversion enables support for 24p and PAL format sources. 3D signals are converted to 2D. Fully automatic operation eliminates any complicated setup by utilizing the displays’ EDID to configure each scaler. Video Wall Processing The DMB-4K-O-HD-DNT has another trick up its sleeve, providing zoom capability and bezel compensation on each output to display just a portion of the source image. Using this feature, up to eight output cards may be combined to provide processing for a video wall composed of up to 64 individual displays. Video wall configurations up to eight wide by up to eight high are supported. Analog Audio De-Embedding Each HDMI output on the DMB-4K-O-HD-DNT is accompanied by a balanced analog audio output, allowing stereo audio signals to be extracted from the digital output and fed to a sound system. The analog audio outputs are enabled using the optional Analog Audio Breakout Box (model AUD-BOB-1602). Dante™ Audio Networking Dante networking enables streamlined integration with Crestron Avia™ DSP products and other Dante enabled audio processors, amplifiers, mixers, and switchers. Dante allows stereo audio signals from any or all of the blade’s outputs to be routed to such equipment over an Ethernet network. Send/return loop capability is also supported, allowing audio from any input source to be externally processed, mixed, or switched via Dante, and then re-embedded with the video signal at any of the HDMI outputs. The Dante network interface is provided via the DM switcher’s LAN port, supporting up to 120 simultaneous stereo input and output signals. CEC Embedded Device Control DigitalMedia offers an alternative to conventional RS-232 and IR display control by harnessing the CEC (Consumer Electronics Control) signal embedded in HDMI. Through its connection to a control system (via the DM switcher), the DMB-4K-O-HD-DNT provides a gateway for controlling display devices right through their HDMI connections, potentially eliminating the need for any dedicated control wires or IR emitters.

The DSP608D is the ideal tool for enhancing, updating and protecting any sound system by using the latest technology in sound processing.Equipped with 4 analog plus 2 digital inputs (AES/EBU or Dante) and 8 analog outputs, XLR balanced. The DSP608D is the ideal tool for enhancing, updating and protecting any sound system by using the latest technology in sound processing.Equipped with 4 analog plus 2 digital inputs (AES/EBU or Dante) and 8 analog outputs, XLR balanced. The unit is completely configurable: each input can be assigned to any output with various crossover filters (Butterworth, Linkwitz-Riley, Bessel), 10 parametric equalisers, compressor/limiter, delay up to 2 seconds (680 metres), polarity, up to 80 presets memory, password protection and PC software control (Windows and Mac OS).