The audio routing system Nexus can be equipped with a new Dante™ interface module board named XDIP which connects Nexus to IP networks running Audinate’s Dante™. The card is equipped with sampling rate converters on all 64 inputs and outputs. The integrated Ethernet switch offers 4 ports and is AVB-ready.
The fully digital Nexus is one of most versatile audio network and routing systems on the market today and is a core product of Stage Tec, the Berlin manufacturer of professional audio mixing consoles and routers. Nexus and the router node Nexus Star are also hosts to the audio processing of Stage Tec mixing consoles such as Aurus and Crescendo.
Edge is a powerful, configurable, DSP frame with four 4-channel I/O slots. An array of I/O card options including analog, digital, and AEC tailor the system to specific project requirements. On-board 10/100 and gigabit switches lower system cost and reduce complexity with less hardware and fewer potential points of failure. Multiple user control options include zero cost ARC-WEB browser based interface, low cost Symetrix ARC wall panels ,easy to implement SymNet SymVue GUI, and programmable third-party touch screens.
The cost effective xIn 12 increases a system’s analog input channel capacity resulting in a reduction in overall price per channel. Designed exclusively for use with Edge and Radius DSP units, each of the twelve analog inputs’ parameters (5 gain levels, trim, mute, phantom power), along with bus assignments, are configured using SymNet Composer open architecture software. xIn 12 set up is logical and fast with no requirement to use third party software; there are no mechanical switches or circuit board jumpers to set.
The cost effective xOut 12 increases a system’s analog output channel capacity resulting in a reduction in overall price per channel. Designed exclusively for use with Edge and Radius DSP units, each of the twelve analog outputs’ parameters (gain and mute), along with bus assignments, are configured using SymNet Composer open architecture software. xOut 12 set up is logical and fast with no requirement to use third party software; there are no mechanical switches or circuit board jumpers to set.
cyberTEQ – m Dante to 4xAES3 out - module is a roadworthy distribution system that uses IEEE 802.3 Gigabit-Ethernet as a backbone. The system can be used to build large production networks over huge distances by using fibre optical cables to transmit simultaneously nearly all signals used in the event technology.
The RCM-28 is a dual-channel digital control module with DSP processing capability equivalent to one channel of the Electro-Voice Dx46 system processor. With an RCM-28 module installed, a Tour Grade amplifier’s network and system parameters can be completely supervised and controlled remotely through IRIS-Net.
The RCM-28 remote control module is the first EV product to support the new OMNEO media networking architecture. Tour Grade series amplifiers (such as the TG5 and TG7) with RCM-28 modules installed can be integrated into OMNEO networks of up to 100 other devices that operate over standard Ethernet with standardized protocols.
The CKd Power Amplifiers combine the legendary overbuilt power supply design made famous by the Crest Audio Pro 200™ with NexSys® networking functionality and an ultra-lightweight class D topology. The design centers around an ultra-high efficiency amplifier output circuit that reduces weight while increasing output power, reliability and thermal efficiency.
The CKd Series offers four multi-channel models to meet the needs of demanding audio installations. The CKd 1208 and CKd 1204 provide 1,250 Watts per channel in eight and four channels, respectively, while the CKd 608 and CKd 604 provide 625 Watts per channel in eight and four channels. Each amplifier channel will operate to rated power in direct 70-volt, 100-volt, 8-ohm or 4-ohm modes, configurable per channel.
CKd amplifiers are networkable through Crest Audio’s Nx Dante-8™ and Nx Cobranet-8 NexSys control modules and either Crest Audio NexSys 5 or Peavey® MediaMatrix® NWare™ software programs for advanced control and audio routing. The Nx Dante-8 and Nx Cobranet-8 modules fit into the rear bay of CKd Series power amps and support all NexSys functions, DSP functions and Dante digital audio I/O (via 1 Gigabit Ethernet connection) or Cobranet digital audio I/O (via 100baseT connection).
A Control Voltage input is included on each channel to allow external gain control, while the Fault output on each channel allows the CKd power amps to be wired to other monitoring systems. In addition, users can conserve energy by disabling channels that are not in use.
The CKd Series includes Crest Audio's exclusive ACL™ (Active Clip Limiting), which automatically reduces gain at the onset of clipping to prevent amplifier and load damage, and IGM™ (Instantaneous Gain Modulation), which monitors load current to protect against overloading.
The ES4 system offers sixteen channels of American made, professional quality microphone preamplification and eight line level return channels via a choice of digital transport formats.
The ES4 system offers sixteen channels of American made, professional quality microphone preamplification and eight line level return channels via a choice of digital transport formats. Each ES4T (transmitter) and ES4R (receiver) can be configured for Cobranet®, or Dante® formats by simply changing the network module in the unit. The exceptional performance, ease of use, and extreme flexibility make the ES4 series products excellent I/O devices for any digital audio network. The typical Whirlwind ES4 system consists of two components: the ES4T transmitter module, which has sixteen balanced mic/line inputs and eight line level outputs. The matching ES4R receiver module has sixteen line level outputs and eight line level inputs. All inputs have variable gain controls and LED level monitoring.
The DNA7874 series of amplifiers are an integral part of theAtlasIED GLOBALCOM Communications System, allowing a few audio zones to be added where necessary when a full 16-zone T9160 amplifier frame is not required.
The DNA7874 series of amplifiers are an integral part of theAtlasIED GLOBALCOM Communications System, allowing a few audio zones to be added where necessary when a full 16-zone T9160 amplifier frame is not required. The amplifiers feature either CobraNet® or Audinates Dante™ digital audio input and four channelsof 200 watt amplification. The DNA7874 amplifiers are controlled with network commands for selecting input routing and configuring EQ, delay and output levels. Amplifiers may be controlled by a stand-alone GLOBALCOM configuration utility or through the GLOBALCOM System Management Center.
The DNA7814 series of amplifiers are an integral part of theAtlasIED GLOBALCOM Communications System, allowing a few audio zones to be added where necessary when a full 16-zone T9160 amplifier frame is not required.
The DNA7814 series of amplifiers are an integral part of theAtlasIED GLOBALCOM Communications System, allowing a few audio zones to be added where necessary when a full 16-zone T9160 amplifier frame is not required. The amplifiers feature Audinate's Dante™ digital audio input and four channelsof 200 watt amplification. The DNA7814 amplifiers are controlled with network commands for selecting input routing and configuring EQ, delay and output levels. Amplifiers may be controlled by a stand-alone GLOBALCOM configuration utility or through the GLOBALCOM System Management Center.
8-Channel Digital IntelliMix Automatic Mixer designed for use in speech applications, including sound reinforcement, broadcasting and audio recording.
8-Channel Digital IntelliMix Automatic Mixer designed for use in speech applications, including sound reinforcement, broadcasting and audio recording.
Provides networking capabilities, comprehensive software control, AMX and Crestron compatibility, and analog / digital connectivity between devices
Offers IntelliMix® technology and digital feedback reduction
Features 8 active-balanced microphone or line-level inputs and 8 dedicated, impedance-balanced direct outputs
Includes SCM820, hardware kit, ethernet cable, power cable, USB flash drive, and user guide
8-Channel Digital IntelliMix Automatic Mixer designed for use in speech applications, including sound reinforcement, broadcasting and audio recording.
8-Channel Digital IntelliMix Automatic Mixer designed for use in speech applications, including sound reinforcement, broadcasting and audio recording.
Provides networking capabilities, comprehensive software control, AMX and Crestron compatibility, and analog / digital connectivity between devices
Offers IntelliMix® technology and digital feedback reduction
Features 8 active-balanced microphone or line-level inputs and 8 dedicated, impedance-balanced direct outputs
Includes SCM820, hardware kit, ethernet cable, power cable, USB flash drive, and user guide
The NION system is the most powerful configurable DSP core ever built for the commercial, engineered systems marketplace. All units feature a floating point-based DSP engine, coupled with the world's most efficient and high performance audio algorithms.
NION® nE is the latest in a long line of quality audio products from MediaMatrix®. Rooted in the legacy of the incredible power of MediaMatrix technology, NION takes the world's standard for audio processing to higher levels than ever before.
Imagine using just one tool to design, program, and control your entire project! NION will change the way you design forever. The NION system is the most powerful configurable DSP core ever built for the commercial, engineered systems marketplace. All units feature a floating point-based DSP engine, coupled with the world's most efficient and high performance audio algorithms.
Intuitive network-centric role assignments and extensive transport options make NION an unbeatable product for large and small projects alike.
Built on an architecture designed for stable, efficient and robust performance, NION® n3 and n6 feature a 448-channel high speed digital audio bus for seamless expandability. This low-latency audio path makes NION perfect for performance audio projects in addition to applications where a massive amount of audio processing is required.
Built on an architecture designed for stable, efficient and robust performance, NION® n3 and n6 feature a 448-channel high speed digital audio bus for seamless expandability. This low-latency audio path makes NION perfect for performance audio projects in addition to applications where a massive amount of audio processing is required. All units feature a floating point-based DSP engine, coupled with the world's most efficient and high performance audio algorithms. This makes the NION system the most powerful configurable DSP core ever built for the commercial, engineered systems marketplace.
Intuitive, network-centric role assignments and extensive transport options make NION an unbeatable product for large and small projects alike. A single tool to design, program, and control your entire project, NION will change the way you design forever!
N6R has dual redundant power supplies
The OM‑1 is a compact interface module which is prepared for a connection to an OMNEO network. The OM‑1 is able to send and receive Dante audio to and from other PAVIRO Controllers with an OM‑1 Interface Module.
The OM‑1 is a compact interface module which is prepared for a connection to an OMNEO network. The OM‑1 is able to send and receive Dante audio to and from other PAVIRO Controllers with an OM‑1 Interface Module. The transmission of up to 16 digital audio input signals and 16 digital audio output channels with low latency is possible with the OM‑1.
A complete standalone console package with 32 channels of analogue input to 27 analogue outputs, plus 6 digital inputs, 4 Stereo FX Returns and 6 digital outputs in one chassis.
A complete standalone console package with 32 channels of analogue input to 27 analogue outputs, plus 6 digital inputs, 4 Stereo FX Returns and 6 digital outputs in one chassis. As standard, Input to mix capacity is 46chs, but by adding a stagebox (compatible with the existing Vi racks), simultaneous channel count increases to 64. Channels are routable to 24 multifunction busses, plus LR and Mono Mix busses.
Up to 8 of the busses can be configured as Matrix mixes, each with up to 16 sources.
The surface is just over a metre wide, and includes 16 motorised channel faders with fixed and user-definable layers, 8 output/VCA faders and 2 master faders.
What's really cool about the Vi1 though, is the new Widescreen Vistonics interface, which will be instantly familiar to anyone who's driven a Vi6 or Vi4, as well as retaining the same 'walk-up' user-friendliness of the other Vi consoles. This new development displays all parameters for 16 channels side by side, on a single 22" Vistonics touch screen. The upper half of the screen handles the Output section control as well as Cue List or Menu displays. Parameter control is via two rows of 16 rotary encoders. Exactly the same channel functionality as the Vi6 and Vi4 is available here, along with all the same core snapshot, talkback and monitoring facilities.
Naturally, the Vi1 inherits many of the facilities of its larger siblings, including Soundcraft FaderGlow™, 4 stereo Lexicon effects engines, BSS Audio graphic EQs on all output busses, and integral dynamics on all channels. The desk is also compatible with Vi2, 4 and 6 show files.
As you’d expect, the price of the Vi1 is extremely attractive, which is sure to make it a clear winner with engineers and sound companies.
Third party applications that use Dante Ready™ allow customers to purchase and activate Dante audio channels after installation using the Dante Activator tool in Dante Controller 4.5 or higher. Dante Activator is tied to an active Audinate user account and accepts standard credit card payments.
