Dante-enabled Product Catalog

This product has reached "end of life". Ashly’s 2-channel ne Series power amplifiers are designed to meet the specifications of the performance installation and constant voltage markets. The ne2400 delivers 1,200W into either a 4 Ohm or 70V load; the 100V output model is also rated at 1,200W. It includes balanced analog inputs, bridge mono mode, selectable 8Hz 12dB/oct or 400Hz 6dB/oct hi-pass filter, input sensitivity switch, remote standby for power up, DC remote level control and full Ethernet control using Ashly’s Protea™ ne Software.

Designed around an energy efficient Class-D platform with a switching power supply, connecting and controlling an amplifier for networked systems is simplified with Ashly ne Amplifiers. The ne4250bd offer 4-Channels @ 250W per channel with separate hi-z and lo-z models. NE offers ease of use, setup and control using standard 10/100 Ethernet protocol and Protea™ ne Software. NE Series Amplifiers are offered in two separate platforms—the standard network amplifier or a network amplifier with an on-board Protea™ DSP Processor.

There are an additional 7 models in the ne4250 series:

• ne4250.25bd - Network Power Amplifier 4 x 250W @ 25V. Includes OPDante & OPDAC-4 Cards
• ne4250.70bd - Network Power Amplifier 4 x 250W @ 70V. Includes OPDante & OPDAC-4 Cards
• ne4250.10bd - Network Power Amplifier 4 x 250W @ 100V. Includes OPDante & OPDAC-4 Cards
• ne4250ped - Network Power Amplifier 4 x 250W @ 4 Ohms w/Protea DSP. Includes OPDante & OPDAC-4 Cards
• ne4250.25ped - Network Power Amplifier 4 x 250W @ 25V w/Protea DSP. Includes OPDante & OPDAC-4 Cards
• ne4250.70ped - Network Power Amplifier 4 x 250W @ 70V w/Protea DSP. Includes OPDante & OPDAC-4 Cards
• ne4250.10ped - Network Power Amplifier 4 x 250W @ 100V w/Protea DSP. Includes OPDante & OPDAC-4 Cards

Connecting and controlling an audio processor for networked systems is simplified with Ashly’s ne Digital Signal Processors. Complimentary to Ashly power amplifiers, the ne4400t (4 in/4 out) offers easy setup, uses standard 10/100 Ethernet protocol and features Ashly’s Protea™ ne Software. Standard units are analog line with four option bays supporting network audio and mic input options. The DSP signal processing library is extensive and utilizes multiple SHARC 32-bit processors with sample rates of either 48kHz or 96kHz.

Connecting and controlling an audio processor for networked systems is simplified with Ashly’s ne Digital Signal Processors. Complimentary to Ashly power amplifiers, the ne4800t (4 in/8 out) offers easy setup, uses standard 10/100 Ethernet protocol and features Ashly’s Protea™ ne Software. Standard units are analog line with four option bays supporting network audio and mic input options. The DSP signal processing library is extensive and utilizes multiple SHARC 32-bit processors with sample rates of either 48kHz or 96kHz.

Designed around an energy efficient Class-D platform with a switching power supply, connecting and controlling an amplifier for networked systems is simplified with Ashly ne Amplifiers. The ne8250bd offer 8-Channels @ 250W per channel with separate hi-z and lo-z models. NE offers ease of use, setup and control using standard 10/100 Ethernet protocol and Protea™ ne Software. NE Series Amplifiers are offered in two separate platforms—the standard network amplifier or a network amplifier with an on-board Protea™ DSP Processor.

The ne8250 series contains these additional models:

• ne8250.25bd - Network Power Amplifier 8 x 250W @ 25V. Includes OPDante & OPDAC-8 Cards
• ne8250.70bd - Network Power Amplifier 8 x 250W @ 70V. Includes OPDante & OPDAC-8 Cards
• ne8250.10bd - Network Power Amplifier 8 x 250W @100V. Includes OPDante & OPDAC-8 Cards
• ne8250ped - Network Power Amplifier 8 x 250W @ 4 Ohms w/Protea DSP. Includes OPDante & OPDAC-8 Cards
• ne8250.25ped - Network Power Amplifier 8 x 250W @ 25V w/Protea DSP. Includes OPDante & OPDAC-8 Cards
• ne8250.70ped - Network Power Amplifier 8 x 250W @ 70V w/Protea DSP. Includes OPDante & OPDAC-8 Cards
• ne8250.10ped - Network Power Amplifier 8 x 250W @ 100V w/Protea DSP. Includes OPDante & OPDAC-8 Cards

Connecting and controlling an audio processor for networked systems is simplified with Ashly’s ne Digital Signal Processors. Complimentary to Ashly power amplifiers, the ne8800 (8 in/8 out) offers easy setup, uses standard 10/100 Ethernet protocol and features Ashly’s Protea™ ne Software. Standard units are analog line with four option bays supporting network audio and mic input options. The DSP signal processing library is extensive and utilizes multiple SHARC 32-bit processors with sample rates of either 48kHz or 96kHz.

The nXp1.52d is a 2 channel multi-mode amplifier capable of driving 2 Ohm loads at full power. The maximum rated output power is 1,500W per channel at Low Z and 70V modes, and 1,250W in 100V mode. There is an automatic but defeatable sleep mode consuming <1W, and instant standby mode controlled by contact closure or software. A switch mode power supply auto-detects 120VAC or 240VAC mains, and a Neutrik® powerCON is used for the AC cord. Each channel has selectable output mode of Low Z, 70V, or 100V, an 80Hz high-pass filter, input limiter, and input gain settings of 26dB, 32dB, 38dB, or 1.4V. Each channel has remote DC level control. Input connectors are Neutrik® XLR/TRS combo jack and Euroblock, while output connectors is Neutrik® speakON. The unit has a front panel power switch and level controls that can be disabled. LEDs indicate Protect, Sleep, Disabled, Com, and Bridge mode status, as well as Temperature, Output Current, Output Signal, and Clipping/Mute status per channel. The unit has Ethernet control with a real-time clock for event scheduling. The unit has serial data remote control, aux preamp outputs, preset control, fault condition logic outputs, optional network audio and AES3 digital audio capability. The unit has 32-bit DSP processing at 48kHz or 96kHz sampling rate. DSP functions include swept load impedance, gain, dynamics including autoleveler and ambient noise compensation, equalization including graphic, parametric, feedback suppressor, and FIR filters, a matrix mixer including automixing, crossover, delay, and a signal generator. The amplifier has temperature dependent variable speed forced-air cooling.

The nXp1.54d is a 4 channel multi-mode amplifier capable of driving 2 Ohm loads at full power. The maximum rated output power is 1,500W per channel at Low Z and 70V modes, and 1,250W in 100V mode. There is an automatic but defeatable sleep mode consuming <1W, and instant standby mode controlled by contact closure or software. A switch mode power supply auto-detects 120VAC or 240VAC mains, and a Neutrik® powerCON is used for the AC cord. Each channel has selectable output mode of Low Z, 70V, or 100V, an 80Hz high-pass filter, input limiter, and input gain settings of 26dB, 32dB, 38dB, or 1.4V. Each channel has remote DC level control. Input connectors are Neutrik® XLR/TRS combo jack and Euroblock, while output connectors is Neutrik® speakON. The unit has a front panel power switch and level controls that can be disabled. LEDs indicate Protect, Sleep, Disabled, Com, and Bridge mode status, as well as Temperature, Output Current, Output Signal, and Clipping/Mute status per channel. The unit has Ethernet control with a real-time clock for event scheduling. The unit has serial data remote control, aux preamp outputs, preset control, fault condition logic outputs, optional network audio and AES3 digital audio capability. The unit has 32-bit DSP processing at 48kHz or 96kHz sampling rate. DSP functions shall include swept load impedance, gain, dynamics including autoleveler and ambient noise compensation, equalization including graphic, parametric, feedback suppressor, and FIR filters, a matrix mixer including automixing, crossover, delay, and a signal generator. The amplifier has temperature dependent variable speed forced-air cooling.

The nXp3.02d is a 2 channel multi-mode amplifier capable of driving 2 Ohm loads at full power. The maximum rated output power is 3,000W per channel at Low Z, 2,450W per channel in 70V mode, and 1,250W in 100V mode. There is an automatic but defeatable sleep mode consuming <1W, and instant standby mode controlled by contact closure or software. A switch mode power supply auto-detects 120VAC or 240VAC mains, and a Neutrik® powerCON is used for the AC cord. Each channel has selectable output mode of Low Z, 70V, or 100V, an 80Hz high-pass filter, input limiter, and input gain settings of 26dB, 32dB, 38dB, or 1.4V. Each channel has remote DC level control. Input connectors are Neutrik® XLR/TRS combo jack and Euroblock, while output connectors is Neutrik® speakON. The unit has a front panel power switch and level controls that can be disabled. LEDs indicate Protect, Sleep, Disabled, Com, and Bridge mode status, as well as Temperature, Output Current, Output Signal, and Clipping/Mute status per channel. The unit has Ethernet control with a real-time clock for event scheduling. The unit has serial data remote control, aux preamp outputs, preset control, fault condition logic outputs, optional network audio and AES3 digital audio capability. The unit has 32-bit DSP processing at 48kHz or 96kHz sampling rate. DSP functions include swept load impedance, gain, dynamics including autoleveler and ambient noise compensation, equalization including graphic, parametric, feedback suppressor, and FIR filters, a matrix mixer including automixing, crossover, delay, and a signal generator. The amplifier has temperature dependent variable speed forced-air cooling.

The nXp3.04d is a 4 channel multi-mode amplifier capable of driving 2 Ohm loads at full power. The maximum rated output power is 3,000W per channel at Low Z, 2,450W per channel in 70V mode, and 1,250W in 100V mode. There is an automatic but defeatable sleep mode consuming <1W, and instant standby mode controlled by contact closure or software. A switch mode power supply auto-detects 120VAC or 240VAC mains, and a Neutrik® powerCON is used for the AC cord. Each channel has selectable output mode of Low Z, 70V, or 100V, an 80Hz high-pass filter, input limiter, and input gain settings of 26dB, 32dB, 38dB, or 1.4V. Each channel has remote DC level control. Input connectors are Neutrik® XLR/TRS combo jack and Euroblock, while output connectors are Neutrik® speakON. The unit has a front panel power switch and level controls that can be disabled. LEDs indicate Protect, Sleep, Disabled, Com, and Bridge mode status, as well as Temperature, Output Current, Output Signal, and Clipping/Mute status per channel. The unit has Ethernet control with a real-time clock for event scheduling. The unit has serial data remote control, aux preamp outputs, preset control, fault condition logic outputs, optional network audio and AES3 digital audio capability. The unit has 32-bit DSP processing at 48kHz or 96kHz sampling rate. DSP functions include swept load impedance, gain, dynamics including autoleveler and ambient noise compensation, equalization including graphic, parametric, feedback suppressor, and FIR filters, a matrix mixer including automixing, crossover, delay, and a signal generator. The amplifier has temperature dependent variable speed forced-air cooling.

Ashly's Pema™ is an energy efficient, Class-D amplifier topology with a switching power supply and full matrix mixer, translates to 80% energy efficient out of the box. The pema4125 is a 4-Channel @ 125 Watts per channel and ships with Ashly’s full Protea™ suite of DSP.

The pema4125d is also available in these models:

pema 4125.70d - pema Network Power Amp 4 x 125W @ 70V Constant Voltage w/ 8x8 Protea DSP. Includes OPDante Card

pema 4125.10d - pema Network Power Amp 4 x 125W @ 100V Constant Voltage w/ 8x8 Protea DSP. Includes OPDante Card

Ashly's Pema™ is an energy efficient, Class-D amplifier topology with a switching power supply and full matrix mixer, translates to 80% energy efficient out of the box. The pema4250 is a 4-Channel @ 250 Watts per channel and ships with Ashly’s full Protea™ suite of DSP.

The pema4250d is also available in these models:

pema 4250.25d - pema Network Power Amp 4 x 250W @ 25V with 8x8 Protea DSP. Includes OPDante Card

pema 4250.70d - pema Network Power Amp 4 x 250W @ 70V with 8x8 Protea DSP. Includes OPDante Card

pema 4250.10d - pema Network Power Amp 4 x 250W @ 100V with 8x8 Protea DSP. Includes OPDante Card

Ashly's Pema™ is an energy efficient, Class-D amplifier topology with a switching power supply and full matrix mixer, translates to 80% energy efficient out of the box. The pema8125 is a 8-Channel @ 125 Watts per channel and ships with Ashly’s full Protea™ suite of DSP.

The pema8125d is also available in these models:

pema 8125.70d - pema Network Power Amp 8 x 125W @ 70V Constant Voltage w/ 8x8 Protea DSP. Includes OPDante Card

pema 8125.10d - pema Network Power Amp 8 x 125W @ 100V Constant Voltage w/ 8x8 Protea DSP. Includes OPDante Card

Ashly's Pema™ is an energy efficient, Class-D amplifier topology with a switching power supply and full matrix mixer, translates to 80% energy efficient out of the box. The pema8250 is a 8-Channel @ 250 Watts per channel and ships with Ashly’s full Protea™ suite of DSP.

The pema8250 is also available in these models:

pema 8250.25d - pema Network Power Amp 8 x 250W @ 25V with 8x8 Protea DSP. Includes OPDante Card

pema 8250.70d - pema Network Power Amp 8 x 250W @ 70V with 8x8 Protea DSP. Includes OPDante Card

pema 8250.10d - pema Network Power Amp 8 x 250W @ 100V with 8x8 Protea DSP. Includes OPDante Card

The BB-88DT is a BlueBridge DSP audio processor featuring a 8 Input and 8 Output configuration with Dante™ that features powerful and flexible tools offering mission critical solutions to satisfy the exact needs of any installation.

The BB-168DT is a BlueBridge DSP audio processor featuring a 16 Input and 8 Output configuration with Dante™ that features powerful and flexible tools offering mission critical solutions to satisfy the exact needs of any installation.

The BB-816DT is a BlueBridge DSP audio processor featuring a 8 Input and 16 Output configuration with Dante™ that features powerful and flexible tools offering mission critical solutions to satisfy the exact needs of any installation.

The BB-1616DT is a BlueBridge DSP audio processor featuring a 16 Input and 16 Output configuration with Dante™ that features powerful and flexible tools offering mission critical solutions to satisfy the exact needs of any installation.

The BB-EB1616DT can be incorporated into any BlueBridge system as an I/O expander or it can be used as a standalone digital snake on networks featuring Dante™.

The unDX2IO+ Dante™ Audio Interface is a cost effective multi‐IO wall box to add up to two channels (in and out) of Dante audio to an existing Dante-based networked audio system.. The unDX2IO features XLR balanced audio inputs and outputs, switchable mic/line gain and switchable phantom power on the inputs. An additional 2 Balanced line inputs are accessible on side of unit for use with a companion unXP2I passive expansion plate. All inputs and outputs can be used simultaneously and all audio channels are available separately. The unDX2IO+ is designed to fit into most dual gang US junction boxes and is PoE enabled, so all connectivity (power and data) is provided by a single CAT5 cable. CONTROL - Audio flow assignment, input gain and phantom power are all controllable via the Dante network connection. The unDX2IO+ replaces the legacy unDX2IO.

AuviTran Audio ToolBox is a modular audio platform giving access to a large variety of professional audio networked configurations. With 3 or 7 slots, AVBx3 and AVBx7 can convert microphone, line in, line out, AES EBU, ADAT, MADI, EtherSound or CobraNet to DANTE. The AVBx3 and AVBx7 can be mounted in Installation or Touring mode for front or rear panel connectors. AVBx7 embed a built in 1024x1024 digital routing matrix. Accessories such as redundant power supplies, Switch card with Fiber connectors, 128 channels Sample Rate Converter or GPIOs can be added to extend the ToolBox Solution.

AuviTran Audio ToolBox is a modular audio platform giving access to a large variety of professional audio networked configurations. With 3 or 7 slots, AVBx3 and AVBx7 can convert microphone, line in, line out, AES EBU, ADAT, MADI, EtherSound or CobraNet to DANTE. The AVBx3 and AVBx7 can be mounted in Installation or Touring mode for front or rear panel connectors. AVBx7 embed a built in 1024x1024 digital routing matrix. Accessories such as redundant power supplies, Switch card with Fiber connectors, 128 channels Sample Rate Converter or GPIOs can be added to extend the ToolBox Solution.

AuviTran Audio ToolBox is a modular audio platform giving access to a large variety of professional audio networked configurations.

The D800-Dante A-Net Distributor provides seamless connectivity between a Dante audio network and Aviom Personal Mixers, including the A-16II and new A360.

The Bose® ControlSpace ESP-00 Series II engineered sound processor offers high-quality signal processing through a flexible I/O audio platform. Up to eight mixed analog and digital audio expansion cards (input and/or output), including Dante™ audio networking can be installed to create customized audio systems. Onboard connectivity includes Ethernet, RS-232, expandable GPIO, and support for elegant Bose control centers and volume controls.

The Bose® ControlSpace® ESP-880 engineered sound processor is a single-rack-space DSP with an 8x8 analog audio configuration, built-in 8-channel ESPLink digital output, and an open digital expansion slot ready to accommodate optional network audio cards including Dante™. This model meets today’s strict requirements for high-quality signal processing and control in a cost-effective package. The ESP-880 is designed for a wide variety of applications ranging from small self-contained projects to larger networked applications.

The Bose® ControlSpace® ESP-1240 engineered sound processor is a single-rack-space DSP with an 12x4 analog audio configuration, built-in 8-channel ESPLink digital output, and an open digital expansion slot ready to accommodate optional network audio cards including Dante™. This model meets today’s strict requirements for high-quality signal processing and control in a cost-effective package. The ESP-1240 is designed for a wide variety of applications ranging from small self-contained projects to larger networked applications.