Dante-enabled Product Catalog
The Kevic MA3224 is a Dante Digital Power Amplifier.
The Kevic MA3224 is a Dante Digital Power Amplifier.
Features:
- Inout Channels:2XLR Balance with Link - Ouputs
- Rated Output Power :2 X 1200Watts 4 ohms
- Power Band Width:10Hz-28KHz
- Input Sensitivity:+4dBu(1.2Vrms)
- THD at Rated Power: 0.05%
- CrossTalk : Less Than 80dB
- Signal to Noise Ratio: more than 104dB
- Network audio Format : Dante BK2
- Demansions,mm:482 x 88 x 432
- Weight : 15Kg
The Kevic MA3232 is a Dante Digital Power Amplifier.
The Kevic MA3232 is a Dante Digital Power Amplifier.
Features:
- In/out Channels:2XLR Balance with Link Ouputs
- Rated Output Power :2 X 1600Watts 4 ohms
- Power Band Width:10Hz-28KHz
- Input Sensitivity:+4dBu(1.2Vrms)
- THD at Rated Power: 0.05%
- CrossTalk : Less Than 80dB
- Signal to Noise Ratio: more than 104dB
- Network audio Format : Dante BK2
- Demansions,mm:482 x 88 x 432
- Weight : 17Kg
The Kevic MA3212 is a Dante Digital Power Amplifier.
The Kevic MA3212 is a Dante Digital Power Amplifier.
Features:
- In/out Channels:2XLR Balance with Link Ouputs
- Rated Output Power :2 X 600Watts 4 ohms
- Power Band Width:10Hz-28KHz
- Input Sensitivity:+4dBu(1.2Vrms)
- THD at Rated Power: 0.05%
- CrossTalk : Less Than 80dB
- Signal to Noise Ratio: more than 104dB
- Network audio Format : Dante BK2
- Demansions,mm:482 x 88 x 432
- Weight : 13Kg
The Bittner 4Xe power amplifier is available in 2 models, the 4X 1200e and 4X 2000e (with 4 x 1200 watt and 4 x 2000 watts @ 4 ohms respectively), and offers front controls, analog or digital inputs, XLR or Phoenix input connectors, Speakon or Phoenix output connectors – the concept of the 4X is as flexible as its applications. Also available are audio networking via Dante™ and control via Ethernet (with SXL II) offering worldwide diagnostics and maintenance via the Internet
The 4Xe and the rear control version, the 4Xi, both offer the following specifications:
- Up to 4x 2000 W in only 2 RU
- Impedance measurement
- Selectable Clip Limiter (hard/soft)
- 4-channel Dante Inputs
- SXL II Dataport (RS485)
- High Tech SMT Design
- Excellent sound and superior impulse response
- 2 separate stereo amplifiers
- Ready for 2 Ohm operation
- Protection Circuits: DC, LF, HF, Thermal, Short Circuit, Current Limiter, 3 ms Muting Delay
- XLR inputs and Speakon outputs (e version)
- Phoenix in- and outputs (i version)
- High-End switched power supply with PFC
- LED indicators for SIGNAL, CLIP, PROTECT, POWER
- Temperature controlled, variable speed low noise fans
- Digital wear-free Volume Controls (can be operated manually)
- Selectable Stereo/Bridged Mode
- Softstart
- Sequential Remote Power On
- 2 Alive Contacts
- 3 Years Warranty
The Bittner 4Xi power amplifier is available in 2 models, the 4X 1200i and 4X 2000i (with 4 x 1200 watt and 4 x 2000 watts @ 4 ohms respectively), and offers rear controls, analog or digital inputs, XLR or Phoenix input connectors, Speakon or Phoenix output connectors – the concept of the 4X is as flexible as its applications. Also available are audio networking via Dante™ and control via Ethernet (with SXL II) offering worldwide diagnostics and maintenance via the Internet
The 4Xi and the front control version, the 4Xe, both offer the following specifications:
- Up to 4x 2000 W in only 2 RU
- Impedance measurement
- Selectable Clip Limiter (hard/soft)
- 4-channel Dante Inputs
- SXL II Dataport (RS485)
- High Tech SMT Design
- Excellent sound and superior impulse response
- 2 separate stereo amplifiers
- Ready for 2 Ohm operation
- Protection Circuits: DC, LF, HF, Thermal, Short Circuit, Current Limiter, 3 ms Muting Delay
- XLR inputs and Speakon outputs (e version)
- Phoenix in- and outputs (i version)
- High-End switched power supply with PFC
- LED indicators for SIGNAL, CLIP, PROTECT, POWER
- Temperature controlled, variable speed low noise fans
- Digital wear-free Volume Controls (can be operated manually)
- Selectable Stereo/Bridged Mode
- Softstart
- Sequential Remote Power On
- 2 Alive Contacts
- 3 Years Warranty
Now packaged in an extended 4-in, 4-out configuration together with twice the processing power via the latest version 6.3 Lake Controller release, plus industry-standard Dante® networking, the PLM 12K44 sets the benchmark for Powered Loudspeaker Management Systems.
The PLM 12K44 is the natural successor of the proven, road tested, and trusted Lab.gruppen touring foundation exemplified by the iconic PLM series, but with an additional new powerful feature set: the ability to rationalize power allocation between channels to optimize performance. Now packaged in an extended 4-in, 4-out configuration together with twice the processing power via the latest version 6.3 Lake Controller release, plus industry-standard Dante® networking, the PLM 12K44 sets the benchmark for Powered Loudspeaker Management Systems. The PLM 12K44 combines four channels of extremely powerful amplification with unrivalled signal processing and audio management. At the core of the system concept is the total integration of all devices – including networking, audio I/O, signal processing, amplifiers, power supply and connected mains supply – allowing complete control and monitoring of the entire platform, resulting in unique operational benefits.
The Williams Sound PLA DL210NET-D Digi·Loop induction loop amplifier is state-of-the-art – the first of its kind to maximize modern amplifier technology. DSP audio processing offers flexible, powerful software control of mixing, equalization, compression, loop phase shift and more. Powerful Class D, pulse-width amplifiers maximize efficiency, and reduce size and weight. The unit includes an RJ45 Ethernet jack for connection to Dante networks as well as analog mic and line inputs. Network control capability provides seamless, remote system set-up, operation and monitoring via laptop, tablet or other portable device. The Digi-Loop’s dual-amplifier design offers flexibility, with the option of single 12A output for perimeter loops or dual 10A outputs for loop arrays or one loop and one loudspeaker.
The PMU-120N is a 6-Input 120 watt mixer/amplifier with a built in digital portable media player that will playback MP3 / WMA / WAV audio files using the front panel mounted USB-A port.
The PMU-120N is a 6-Input 120 watt mixer/amplifier with a built in digital portable media player that will playback MP3 / WMA / WAV audio files using the front panel mounted USB-A port. Music can be played directly from a USB memory stick without the use of an external playback device such as CD player. The PM series offers input flexibility with its 6 flexible microphone and line level selectable inputs. Direct PC USB audio input is possible via the built in USB PC sound card.
The PMU-240N is a 6-Input 240 watt mixer/amplifier with a built in digital portable media player that will playback MP3 / WMA / WAV audio files using the front panel mounted USB-A port.
The PMU-240N is a 6-Input 240 watt mixer/amplifier with a built in digital portable media player that will playback MP3 / WMA / WAV audio files using the front panel mounted USB-A port. Music can be played directly from a USB memory stick without the use of an external playback device such as CD player. The PM series offers input flexibility with its 6 flexible microphone and line level selectable inputs. Direct PC USB audio input is possible via the built in USB PC sound card.
The PMU-60N is a 6-Input 60 watt mixer/amplifier with a built in digital portable media player that will playback MP3 / WMA / WAV audio files using the front panel mounted USB-A port.
The PMU-60N is a 6-Input 60 watt mixer/amplifier with a built in digital portable media player that will playback MP3 / WMA / WAV audio files using the front panel mounted USB-A port. Music can be played directly from a USB memory stick without the use of an external playback device such as CD player. The PM series offers input flexibility with its 6 flexible microphone and line level selectable inputs. Direct PC USB audio input is possible via the built in USB PC sound card.
Now offering an extended 4-in, 4-out configuration together with twice the processing power via the latest version 6.3 Lake Controller release, plus industry-standard Dante® networking, the PLM 20K44 sets the benchmark for Powered Loudspeaker Management Systems.
The PLM 20K44 is the natural successor of the proven, road tested, and trusted Lab.gruppen touring foundation exemplified by the iconic PLM 20000Q. Now offering an extended 4-in, 4-out configuration together with twice the processing power via the latest version 6.3 Lake Controller release, plus industry-standard Dante® networking, the PLM 20K44 sets the benchmark for Powered Loudspeaker Management Systems.
The PLM 20K44 combines four channels of extremely powerful amplification with unrivalled signal processing and audio management. At the core of the system concept is the total integration of all devices – including networking, audio I/O, signal processing, amplifiers, power supply and connected mains supply – allowing complete control and monitoring of the entire platform, resulting in unique operational benefits.
The AUDAC SMQ750 is a four channel Class-D power amplifier with an output power of 4 x 750 Watt. The WaveDynamics™ DSP processor in combination with the 2.5” LCD display gives an unmatched user experience with intuitive functions overview for easy configuration.
Using the optional ANI44 network interface module, connection to any DANTE-powered AV network is made possible, allowing flawless incorporation between hundreds of DANTE enabled products available in the market.
The AUDAC SMQ500 is a four channel Class-D power amplifier with an output power of 4 x 500 Watt. The WaveDynamics™ DSP processor in combination with the 2.5” LCD display gives an unmatched user experience with intuitive functions overview for easy configuration.
Using the optional ANI44 network interface module, connection to any DANTE-powered AV network is made possible, allowing flawless incorporation between hundreds of DANTE enabled products available in the market.
The AUDAC SMA750 is a two channel Class-D power amplifier with an output power of 2 x 750 Watt. The WaveDynamics™ DSP processor in combination with the 2.5” LCD display gives an unmatched user experience with intuitive functions overview for easy configuration.
Using the optional ANI22 network interface module, connection to any DANTE-powered AV network is made possible, allowing flawless incorporation between hundreds of DANTE enabled products available in the market.
The AUDAC SMA500 is a two channel Class-D power amplifier with an output power of 2 x 500 Watt. The WaveDynamics™ DSP processor in combination with the 2.5” LCD display gives an unmatched user experience with intuitive functions overview for easy configuration.
Using the optional ANI22 network interface module, connection to any DANTE-powered AV network is made possible, allowing flawless incorporation between hundreds of DANTE enabled products available in the market.
- Dante Ch: 2x2
- AES67 Enabled
The AUDAC SMA350 is a two channel Class-D power amplifier with an output power of 2 x 350 Watt. The WaveDynamics™ DSP processor in combination with the 2.5” LCD display gives an unmatched user experience with intuitive functions overview for easy configuration.
Using the optional ANI22 network interface module, connection to any DANTE-powered AV network is made possible; allowing flawless incorporation between hundreds of DANTE enabled products available in the market.
The Ottocanali 8K4 DSP+D offers a wide range of system control and monitoring functions as well as sound shaping options, a total of 8,000 W output power at 4 ohm over 8 channels for lo-Z or distributed line systems.
As with former versions of Ottocanali, the DSP+D versions feature switchable main and aux signal inputs per channel, adequate GPIO, alarms, Lo-Z and Hi-Z output connections as well as mono-bridgeable channel pairs.
These two RU models implement two redundant universal switch mode power supplies with PFC (Power Factor Correction) and patented SRM (Smart Rails Management) technology that maximises the efficiency of the system as well as drastically reduces power consumption.
With two redundant Dante by Audinate digital streams, the Ottocanali 8K4 DSP+D will fit any venue as ‘stand-alone’ unit, making it ideal for multi-zone applications in mid to large-scale installs.
The Ottocanali 12K4 DSP+D offers a wide range of system control and monitoring functions as well as sound shaping options, a total of 12,000 W output power at 4 ohm over 8 channels for lo-Z or distributed line systems.
As with former versions of Ottocanali, the DSP+D versions feature switchable main and aux signal inputs per channel, adequate GPIO, alarms, Lo-Z and Hi-Z output connections as well as mono-bridgeable channel pairs.
These two RU models implement two redundant universal switch mode power supplies with PFC (Power Factor Correction) and patented SRM (Smart Rails Management) technology that maximises the efficiency of the system as well as drastically reduces power consumption.
With two redundant Dante by Audinate digital streams, the Ottocanali 12K4 DSP+D will fit any venue as ‘stand-alone’ unit, making it ideal for multi-zone applications in mid to large-scale installs.
The Ottocanali 4K4 DSP+D offers a wide range of system control and monitoring functions as well as sound shaping options, a total of 4,000 W output power at 4 ohm over 8 channels for lo-Z or distributed line systems.
As with former versions of Ottocanali, the DSP+D versions feature switchable main and aux signal inputs per channel, adequate GPIO, alarms, Lo-Z and Hi-Z output connections as well as mono-bridgeable channel pairs.
These two RU models implement two redundant universal switch mode power supplies with PFC (Power Factor Correction) and patented SRM (Smart Rails Management) technology that maximises the efficiency of the system as well as drastically reduces power consumption.
With two redundant Dante by Audinate digital streams, the Ottocanali 4K4 DSP+D will fit any venue as ‘stand-alone’ unit, making it ideal for multi-zone applications in mid to large-scale installs.
The Bittner 4Xe power amplifier is available in 2 models, the 4X 1200e and 4X 2000e (with 4 x 1200 watt and 4 x 2000 watts @ 4 ohms respectively), and offers front controls, analog or digital inputs, XLR or Phoenix input connectors, Speakon or Phoenix output connectors – the concept of the 4X is as flexible as its applications. Also available are audio networking via Dante™ and control via Ethernet (with SXL II) offering worldwide diagnostics and maintenance via the Internet
The 4Xe and the rear control version, the 4Xi, both offer the following specifications:
- Up to 4x 2000 W in only 2 RU
- Impedance measurement
- Selectable Clip Limiter (hard/soft)
- 4-channel Dante Inputs
- SXL II Dataport (RS485)
- High Tech SMT Design
- Excellent sound and superior impulse response
- 2 separate stereo amplifiers
- Ready for 2 Ohm operation
- Protection Circuits: DC, LF, HF, Thermal, Short Circuit, Current Limiter, 3 ms Muting Delay
- XLR inputs and Speakon outputs (e version)
- Phoenix in- and outputs (i version)
- High-End switched power supply with PFC
- LED indicators for SIGNAL, CLIP, PROTECT, POWER
- Temperature controlled, variable speed low noise fans
- Digital wear-free Volume Controls (can be operated manually)
- Selectable Stereo/Bridged Mode
- Softstart
- Sequential Remote Power On
- 2 Alive Contacts
- 3 Years Warranty
The Bittner 4Xi power amplifier is available in 2 models, the 4X 1200i and 4X 2000i (with 4 x 1200 watt and 4 x 2000 watts @ 4 ohms respectively), and offers rear controls, analog or digital inputs, XLR or Phoenix input connectors, Speakon or Phoenix output connectors – the concept of the 4X is as flexible as its applications. Also available are audio networking via Dante™ and control via Ethernet (with SXL II) offering worldwide diagnostics and maintenance via the Internet
The 4Xi and the front control version, the 4Xe, both offer the following specifications:
- Up to 4x 2000 W in only 2 RU
- Impedance measurement
- Selectable Clip Limiter (hard/soft)
- 4-channel Dante Inputs
- SXL II Dataport (RS485)
- High Tech SMT Design
- Excellent sound and superior impulse response
- 2 separate stereo amplifiers
- Ready for 2 Ohm operation
- Protection Circuits: DC, LF, HF, Thermal, Short Circuit, Current Limiter, 3 ms Muting Delay
- XLR inputs and Speakon outputs (e version)
- Phoenix in- and outputs (i version)
- High-End switched power supply with PFC
- LED indicators for SIGNAL, CLIP, PROTECT, POWER
- Temperature controlled, variable speed low noise fans
- Digital wear-free Volume Controls (can be operated manually)
- Selectable Stereo/Bridged Mode
- Softstart
- Sequential Remote Power On
- 2 Alive Contacts
- 3 Years Warranty
The power amp H5000 is part of Dynacord’s new PowerH SERIES, which marks a milestone in the design and the production of high-performance power amplifiers.
The power amp H5000 is part of Dynacord’s new PowerH SERIES, which marks a milestone in the design and the production of high-performance power amplifiers. The innovative 3-stage Grounded Bridge Class H Topology with “floating” switching power supply unit offers very high and stable output with extreme high efficiency on an extremely high performance level at minimum weight. PowerH amps are ideal for driving professional touring, high-end Concert-Sound and Pro-Sound applications. Next to classical protections, this new design employs the multi-stage ATP system (Advanced Thermal Protection) for the first time, which in most cases prevents the power amplifier from switching off when the temperature exceeds a critical level. The newly designed MCS system (Mains Current Supervision) prevents power amplifier breakdown caused by the activation of the automatic circuit breaker. For this, among other things, the MCS system uses the highly precise measurement of the RMS value ofthe actual mains current consumption. Information about the status of the power amplifier and its internal protections is provided on a LC-display. By utilizing the optionally available remote control module that is compatible with IRIS-Net™, this power amplifier additionally offers comprehensive remote monitoring and remote control functions plus a universal 2-channel digital audio controller (DSP) including highly precise FIR-filtering and digital speaker protection algorithms.
The power amp H2500 is part of Dynacord’s new PowerH SERIES, which marks a milestone in the design and the production of high-performance power amplifiers.
The power amp H2500 is part of Dynacord’s new PowerH SERIES, which marks a milestone in the design and the production of high-performance power amplifiers. The innovative 3-stage Grounded Bridge Class H Topology with “floating” switching power supply unit offers very high and stable output with extreme high efficiency on an extremely high performance level at minimum weight. PowerH amps are ideal for driving professional touring, high-end Concert-Sound and Pro-Sound applications. Next to classical protections, this new design employs the multi-stage ATP system (Advanced Thermal Protection) for the first time, which in most cases prevents the power amplifier from switching off when the temperature exceeds a critical level. The newly designed MCS system (Mains Current Supervision) prevents power amplifier breakdown caused by the activation of the automatic circuit breaker. For this, among other things, the MCS system uses the highly precise measurement of the RMS value ofthe actual mains current consumption. Information about the status of the power amplifier and its internal protections is provided on a LC-display. By utilizing the optionally available remote control module that is compatible with IRIS-Net™, this power amplifier additionally offers comprehensive remote monitoring and remote control functions plus a universal 2-channel digital audio controller (DSP) including highly precise FIR-filtering and digital speaker protection algorithms.
The CKd Power Amplifiers combine the legendary overbuilt power supply design made famous by the Crest Audio Pro 200™ with NexSys® networking functionality and an ultra-lightweight class D topology.
The CKd Power Amplifiers combine the legendary overbuilt power supply design made famous by the Crest Audio Pro 200™ with NexSys® networking functionality and an ultra-lightweight class D topology. The design centers around an ultra-high efficiency amplifier output circuit that reduces weight while increasing output power, reliability and thermal efficiency.
The CKd Series offers four multi-channel models to meet the needs of demanding audio installations. The CKd 1208 provides 1,250 Watts per channel in eight and four channels.
The CKd Power Amplifiers combine the legendary overbuilt power supply design made famous by the Crest Audio Pro 200™ with NexSys® networking functionality and an ultra-lightweight class D topology. The design centers around an ultra-high efficiency amplifier output circuit that reduces weight while increasing output power, reliability and thermal efficiency.
The CKd Series offers four multi-channel models to meet the needs of demanding audio installations. The CKd 1208 and CKd 1204 provide 1,250 Watts per channel in eight and four channels, respectively, while the CKd 608 and CKd 604 provide 625 Watts per channel in eight and four channels. Each amplifier channel will operate to rated power in direct 70-volt, 100-volt, 8-ohm or 4-ohm modes, configurable per channel.
CKd amplifiers are networkable through Crest Audio’s Nx Dante-8™ and Nx Cobranet-8 NexSys control modules and either Crest Audio NexSys 5 or Peavey® MediaMatrix® NWare™ software programs for advanced control and audio routing. The Nx Dante-8 and Nx Cobranet-8 modules fit into the rear bay of CKd Series power amps and support all NexSys functions, DSP functions and Dante digital audio I/O (via 1 Gigabit Ethernet connection) or Cobranet digital audio I/O (via 100baseT connection).
A Control Voltage input is included on each channel to allow external gain control, while the Fault output on each channel allows the CKd power amps to be wired to other monitoring systems. In addition, users can conserve energy by disabling channels that are not in use.
The CKd Series includes Crest Audio's exclusive ACL™ (Active Clip Limiting), which automatically reduces gain at the onset of clipping to prevent amplifier and load damage, and IGM™ (Instantaneous Gain Modulation), which monitors load current to protect against overloading.
The CKd Power Amplifiers combine the legendary overbuilt power supply design made famous by the Crest Audio Pro 200™ with NexSys® networking functionality and an ultra-lightweight class D topology. The design centers around an ultra-high efficiency amplifier output circuit that reduces weight while increasing output power, reliability and thermal efficiency.
The CKd Series offers four multi-channel models to meet the needs of demanding audio installations. The CKd 1208 and CKd 1204 provide 1,250 Watts per channel in eight and four channels, respectively, while the CKd 608 and CKd 604 provide 625 Watts per channel in eight and four channels. Each amplifier channel will operate to rated power in direct 70-volt, 100-volt, 8-ohm or 4-ohm modes, configurable per channel.
CKd amplifiers are networkable through Crest Audio’s Nx Dante-8™ and Nx Cobranet-8 NexSys control modules and either Crest Audio NexSys 5 or Peavey® MediaMatrix® NWare™ software programs for advanced control and audio routing. The Nx Dante-8 and Nx Cobranet-8 modules fit into the rear bay of CKd Series power amps and support all NexSys functions, DSP functions and Dante digital audio I/O (via 1 Gigabit Ethernet connection) or Cobranet digital audio I/O (via 100baseT connection).
A Control Voltage input is included on each channel to allow external gain control, while the Fault output on each channel allows the CKd power amps to be wired to other monitoring systems. In addition, users can conserve energy by disabling channels that are not in use.
The CKd Series includes Crest Audio's exclusive ACL™ (Active Clip Limiting), which automatically reduces gain at the onset of clipping to prevent amplifier and load damage, and IGM™ (Instantaneous Gain Modulation), which monitors load current to protect against overloading.
The PPA series provides a high-quality DSP-powered amplifier solution for active loudspeakers.
It features Pascal high-power modules, analog, digital and Dante inputs and is available in different configurations for various kinds of speakers.
