Cart
← Back to Product Catalog

Dynacord – PowerH 2500

Amplifiers

More details

Similar Products

leonis-SMA-OBIA2
  • Leonis Cinema

Leonis Cinema – SMA-OBIA

LIDSA32 (Immersive Digital Surround Amplifier-32 Channels) belongs to digital input CLASS-D power amplifier, digital interface access system, it adopts digital processing method in the whole process of signal processing and power amplification, in order to promote the speaker ,it uses low-pass filter to extract the analog audio signal in the CLASS. SMA-OBIA belongs to digital input CLASS-D power amplifier, digital interface access system, it adopts digital processing method in the whole process of signal processing and power amplification, in order to promote the speaker ,it uses low-pass filter to extract the analog audio signal in the CLASS. Each digital-analog conversion will produce a loss of sound, SMA-OBIA link reduces DAC conversion link. So our structure is more rational, more integrated. The sound of the output will be direct, dynamic amplitude larger, transient better. It effectively overcomes defects of the traditional analog amplifier (such as big volume, big distortion, low power efficiency, etc.). Its power utilization rate can be up to 95%. Features:
  • High integration,32 channels output
  • High power output, attain to cinema level
  • Digital input interface
  • 32 channels analog output
  • Over-current protection, overvoltage protection, over temperature protection
  • Adjust acoustic gain, status display, BTL-PBTL mode switch of per channel by network protocol
    Amplifiers
See the product
  • Lake People

G103-D-4

Lake People Phone-Amp G103D4 is a headphone amplifier intended for DANTE networks. The G103D4 model comes with a DANTE 4/4 input and two independent stereo amplifiers. 24 Bit / 192 kHz D/A converters with a Signal-to-noise ratio >105 dB and THD+N as low as 0,002 % are driving the powerful headphone amplifiers. These are best suited to drive any headphones from low to high impedance and with low or high sensitivity. To adapt the amp to demanding headphones, to further reduce the noise level or to maximize the travel of the volume control, the gain is internally adaptable by Dip-Switches to optimize the amp; The DANTE digital audio signals are input via a standard RJ45 connector. Lake People G103D4 will accept 4 audio channels. The unpacked audio signals are input to two high quality D/A converters. The recovered analogue signals are buffered, attenuated in the analogue domain and then sent to powerful headphone amplifiers. If required, additional gain of +6 dB or +12 dB can be set by Dip-Switches inside the amp. Each amp section offers a 1/4” and 3.5 mm phone jack which may be used simultaneously. Power supply for the amp is accomplished either by PoE (Power-over-Ethernet) or by a USB wall plug adaptor (not supplied) with USB-B or USB-C connector. The case, front and back panel of G103D4 is made of rugged black anodized aluminum, the lettering is laser engraved. The volume knobs are also made of solid aluminum.
    Amplifiers
  • Dante Ch: 4x0
  • 24-bit
See the product
aurora-dtx-amp1|aurora-dtx-amp1
  • Aurora Multimedia

Aurora Multimedia – DTX-AMP1

The DTX-AMP1 is the world’s first PoE++ 2x35 watt Dante ® amplifier to integrate IP control and audio DSP functionality. The audio DSP allows parametric equalization, noise reduction, mixing, volume control, audio ducking, and more. The DTX-AMP1 is the world’s first PoE++ 2x35 watt Dante ® amplifier to integrate IP control and audio DSP functionality. The audio DSP allows parametric equalization, noise reduction, mixing, volume control, audio ducking, and more. The IP control allows for any 3 rd party control system to use the DTX-AMP1 RS- 232, IR, Digital I/O, and relays as a IP port expander.  Aurora’s DTX-AMP1 also has a variety of audio inputs and outputs with two balanced L/R line inputs, one of which can be selected as 2 independent L/R unbalanced inputs, L/R balanced line output, S/PDIF, and L/R amplifier output. The amplifier will operate at full power with external power supply of 70W total. Depending on PoE class type connected, the DTX-AMP1 can supply up to 60W of total power
    Amplifiers
  • Dante Ch: 2x0
See the product