Cart
← Back to Product Catalog

Delta DSP40

Amplifiers, DSPs (Digital Signal Processors)

More Details

Similar Products

C7_1_Front_cutout
  • Ampetronic

Ampetronic – C7-1 Dante

The C7-1 Series hearing loop drivers from Ampetronic mark a substantial development in assistive listening technology. C-Series units feature digital signal processing and enable fast, accurate setup and adjustment via a very simple and easy to use user interface.
    Amplifiers
  • Dante Ch: 2x0
  • 24-bit
See the product
KF-PLM-20K44_500px|KF-PLM-20K44_500px
  • Kling & Freitag

Kling & Freitag – PLM 20k44

The K&F PLM 12k44 and K&F PLM20k44 are specifically designed for live performances and touring. These models cover different performance classes and come with a variety of innovations. RPM (rational power management) provides the flexibility to assign different power to each of the four output channels - this removes the need for a bridge operation later on. Other features include PFC (power factor correction), universal power adapters and various inputs - Dante (primary and secondary), AES and analogue. Based on the newly developed Lake core modules and exclusive K&F module pre-sets, the high-performance power amps that are fitted with red front panels will be able to operate all standard K&F systems in future.
    Amplifiers
See the product
ashly-nXe-4002_600px|ashly-nXe-4002_600px
  • Ashly Audio

Ashly – nXe4002bd

The nXe4002bd is a 2 channel multi-mode amplifier capable of driving 2 Ohm loads at full power. The maximum rated output power is 400W per channel at Low Z, 70V, and 100V mode. There is an automatic but defeatable sleep mode consuming <1W, and instant standby mode controlled by contact closure or software. A switch mode power supply auto-detects 120VAC or 240VAC mains, and a Neutrik® powerCON is used for the AC cord. Each channel has selectable output mode of Low Z, 70V, or 100V, an 80Hz high-pass filter, input limiter, and input gain settings of 26dB, 32dB, 38dB, or 1.4V. Each channel has remote DC level control. Input connectors are Neutrik® XLR/TRS combo jack and Euroblock, while output connectors are Neutrik® speakON. The unit has a front panel power switch and level controls that can be disabled. LEDs indicate Protect, Sleep, Disabled, Com, and Bridge mode status, as well as Temperature, Output Current, Output Signal, and Clipping/Mute status per channel. The unit is Ethernet control with a real-time clock for event scheduling. The unit has serial data remote control, aux preamp outputs, preset control, fault condition logic outputs, optional network audio and AES3 digital audio capability. The amplifier has temperature dependent variable speed forced-air cooling.
    Amplifiers
See the product