Dante-enabled Product Catalog

The nXe3.02bd is a 2 channel multi-mode amplifier capable of driving 2 Ohm loads at full power. The maximum rated output power is 3,000W per channel at Low Z, 2,450W per channel in 70V mode, and 1,250W in 100V mode. There is an automatic but defeatable sleep mode consuming <1W, and instant standby mode controlled by contact closure or software. A switch mode power supply auto-detects 120VAC or 240VAC mains, and a Neutrik® powerCON is used for the AC cord. Each channel has selectable output mode of Low Z, 70V, or 100V, an 80Hz high-pass filter, input limiter, and input gain settings of 26dB, 32dB, 38dB, or 1.4V. Each channel has remote DC level control. Input connectors are Neutrik® XLR/TRS combo jack and Euroblock, while output connectors are Neutrik® speakON. The unit has a front panel power switch and level controls that can be disabled. LEDs indicate Protect, Sleep, Disabled, Com, and Bridge mode status, as well as Temperature, Output Current, Output Signal, and Clipping/Mute status per channel. The unit has Ethernet control with a real-time clock for event scheduling. The unit has serial data remote control, aux preamp outputs, preset control, fault condition logic outputs, optional network audio and AES3 digital audio capability. The amplifier has temperature dependent variable speed forced-air cooling.

The unito NAM 602/603 is the first product from a new DELEC range – a speaker amplifier for IP networks that converts traditional analog and digital audio to IP and vice versa. This way, it combines audio, which still relies mostly on analog technologies, with the emerging innovative world of IP. The unito NAM 602/603 is the first product from a new DELEC range – a speaker amplifier for IP networks that converts traditional analog and digital audio to IP and vice versa. This way, it combines audio, which still relies mostly on analog technologies, with the emerging innovative world of IP. The NAM 602/603 transfers the audio from the Dante audio network right to the speakers and, therefore, is the ideal monitoring tool for a multitude of applications. Designed for either indoor or outdoor use, the NAM 602/603 carries an IP66 rating that ensures solid performance under the most challenging conditions. This unit incorporates dual 1GB Ethernet ports (2 x RJ45), four outputs that deliver 12W RMS at 4, 8 or 16 Ohms or, alternatively, two outputs delivering 24W RMS at 8 or 16 Ohms, AES/EBU input and output capability, plus a microphone input. Like the NAM 203, this higher capacity model also provides Delay and Gain, as well as FIR and IIF filters on each channel. The unit is powered by an external power supply. Also noteworthy, the NAM 603 offers redundant audio sources for power amp inputs when used in combination with other DELEC Dante enabled products.

• Direct monitoring in Dante audio networks
• Integrated power amplification
• Simple configuration via web interface

The unito NAM 602/603 is the first product from a new DELEC range – a speaker amplifier for IP networks that converts traditional analog and digital audio to IP and vice versa. This way, it combines audio, which still relies mostly on analog technologies, with the emerging innovative world of IP. The unito NAM 602/603 is the first product from a new DELEC range – a speaker amplifier for IP networks that converts traditional analog and digital audio to IP and vice versa. This way, it combines audio, which still relies mostly on analog technologies, with the emerging innovative world of IP. The NAM 602/603 transfers the audio from the Dante audio network right to the speakers and, therefore, is the ideal monitoring tool for a multitude of applications. Designed for either indoor or outdoor use, the NAM 602/603 carries an IP66 rating that ensures solid performance under the most challenging conditions. This unit incorporates dual 1GB Ethernet ports (2 x RJ45), four outputs that deliver 12W RMS at 4, 8 or 16 Ohms or, alternatively, two outputs delivering 24W RMS at 8 or 16 Ohms, AES/EBU input and output capability, plus a microphone input. Like the NAM 203, this higher capacity model also provides Delay and Gain, as well as FIR and IIF filters on each channel. The unit is powered by an external power supply. Also noteworthy, the NAM 603 offers redundant audio sources for power amp inputs when used in combination with other DELEC Dante enabled products.

• Direct monitoring in Dante audio networks
• Integrated power amplification
• Simple configuration via web interface

The nXe3.04bd is a 4 channel multi-mode amplifier capable of driving 2 Ohm loads at full power. The maximum rated output power is 3,000W per channel at Low Z, 2,450W per channel in 70V mode, and 1,250W in 100V mode. There is an automatic but defeatable sleep mode consuming <1W, and instant standby mode controlled by contact closure or software. A switch mode power supply auto-detects 120VAC or 240VAC mains, and a Neutrik® powerCON is used for the AC cord. Each channel has selectable output mode of Low Z, 70V, or 100V, an 80Hz high-pass filter, input limiter, and input gain settings of 26dB, 32dB, 38dB, or 1.4V. Each channel has remote DC level control. Input connectors are Neutrik® XLR/TRS combo jack and Euroblock, while output connectors are Neutrik® speakON. The unit has a front panel power switch and level controls that can be disabled. LEDs indicate Protect, Sleep, Disabled, Com, and Bridge mode status, as well as Temperature, Output Current, Output Signal, and Clipping/Mute status per channel. The unit has Ethernet control with a real-time clock for event scheduling. The unit has serial data remote control, aux preamp outputs, preset control, fault condition logic outputs, optional network audio and AES3 digital audio capability. The amplifier has temperature dependent variable speed forced-air cooling.

The Kevic MA3212 is a Dante Digital Power Amplifier. The Kevic MA3212 is a Dante Digital Power Amplifier. Features:

• In/out Channels:2XLR Balance with Link Ouputs
• Rated Output Power :2 X 600Watts 4 ohms
• Power Band Width:10Hz-28KHz
• Input Sensitivity:+4dBu(1.2Vrms)
• THD at Rated Power: 0.05%
• CrossTalk : Less Than 80dB
• Signal to Noise Ratio: more than 104dB
• Network audio Format : Dante BK2
• Demansions,mm:482 x 88 x 432
• Weight : 13Kg

The Kevic MA3224 is a Dante Digital Power Amplifier. The Kevic MA3224 is a Dante Digital Power Amplifier. Features:

• Inout Channels:2XLR Balance with Link - Ouputs
• Rated Output Power :2 X 1200Watts 4 ohms
• Power Band Width:10Hz-28KHz
• Input Sensitivity:+4dBu(1.2Vrms)
• THD at Rated Power: 0.05%
• CrossTalk : Less Than 80dB
• Signal to Noise Ratio: more than 104dB
• Network audio Format : Dante BK2
• Demansions,mm:482 x 88 x 432
• Weight : 15Kg

The Kevic MA3232 is a Dante Digital Power Amplifier.   The Kevic MA3232 is a Dante Digital Power Amplifier. Features:

• In/out Channels:2XLR Balance with Link Ouputs
• Rated Output Power :2 X 1600Watts 4 ohms
• Power Band Width:10Hz-28KHz
• Input Sensitivity:+4dBu(1.2Vrms)
• THD at Rated Power: 0.05%
• CrossTalk : Less Than 80dB
• Signal to Noise Ratio: more than 104dB
• Network audio Format : Dante BK2
• Demansions,mm:482 x 88 x 432
• Weight : 17Kg

The Bittner 4Xe power amplifier is available in 2 models, the 4X 1200e and 4X 2000e (with 4 x 1200 watt and 4 x 2000 watts @ 4 ohms respectively), and offers front controls, analog or digital inputs, XLR or Phoenix input connectors, Speakon or Phoenix output connectors – the concept of the 4X is as flexible as its applications. Also available are audio networking via Dante™ and control via Ethernet (with SXL II) offering worldwide diagnostics and maintenance via the Internet The 4Xe and the rear control version, the 4Xi, both offer the following specifications:

• Up to 4x 2000 W in only 2 RU
• Impedance measurement
• Selectable Clip Limiter (hard/soft)
• 4-channel Dante Inputs
• SXL II Dataport (RS485)
• High Tech SMT Design
• Excellent sound and superior impulse response
• 2 separate stereo amplifiers
• Ready for 2 Ohm operation
• Protection Circuits: DC, LF, HF, Thermal, Short Circuit, Current Limiter, 3 ms Muting Delay
• XLR inputs and Speakon outputs (e version)
• Phoenix in- and outputs (i version)
• High-End switched power supply with PFC
• LED indicators for SIGNAL, CLIP, PROTECT, POWER
• Temperature controlled, variable speed low noise fans
• Digital wear-free Volume Controls (can be operated manually)
• Selectable Stereo/Bridged Mode
• Softstart
• Sequential Remote Power On
• 2 Alive Contacts
• 3 Years Warranty

The Bittner 4Xi power amplifier is available in 2 models, the 4X 1200i and 4X 2000i (with 4 x 1200 watt and 4 x 2000 watts @ 4 ohms respectively), and offers rear controls, analog or digital inputs, XLR or Phoenix input connectors, Speakon or Phoenix output connectors – the concept of the 4X is as flexible as its applications. Also available are audio networking via Dante™ and control via Ethernet (with SXL II) offering worldwide diagnostics and maintenance via the Internet The 4Xi and the front control version, the 4Xe, both offer the following specifications:

• Up to 4x 2000 W in only 2 RU
• Impedance measurement
• Selectable Clip Limiter (hard/soft)
• 4-channel Dante Inputs
• SXL II Dataport (RS485)
• High Tech SMT Design
• Excellent sound and superior impulse response
• 2 separate stereo amplifiers
• Ready for 2 Ohm operation
• Protection Circuits: DC, LF, HF, Thermal, Short Circuit, Current Limiter, 3 ms Muting Delay
• XLR inputs and Speakon outputs (e version)
• Phoenix in- and outputs (i version)
• High-End switched power supply with PFC
• LED indicators for SIGNAL, CLIP, PROTECT, POWER
• Temperature controlled, variable speed low noise fans
• Digital wear-free Volume Controls (can be operated manually)
• Selectable Stereo/Bridged Mode
• Softstart
• Sequential Remote Power On
• 2 Alive Contacts
• 3 Years Warranty

Now packaged in an extended 4-in, 4-out configuration together with twice the processing power via the latest version 6.3 Lake Controller release, plus industry-standard Dante® networking, the PLM 12K44 sets the benchmark for Powered Loudspeaker Management Systems. The PLM 12K44 is the natural successor of the proven, road tested, and trusted Lab.gruppen touring foundation exemplified by the iconic PLM series, but with an additional new powerful feature set: the ability to rationalize power allocation between channels to optimize performance. Now packaged in an extended 4-in, 4-out configuration together with twice the processing power via the latest version 6.3 Lake Controller release, plus industry-standard Dante® networking, the PLM 12K44 sets the benchmark for Powered Loudspeaker Management Systems. The PLM 12K44 combines four channels of extremely powerful amplification with unrivalled signal processing and audio management. At the core of the system concept is the total integration of all devices – including networking, audio I/O, signal processing, amplifiers, power supply and connected mains supply – allowing complete control and monitoring of the entire platform, resulting in unique operational benefits.

The Williams Sound PLA DL210NET-D Digi·Loop induction loop amplifier is state-of-the-art – the first of its kind to maximize modern amplifier technology.  DSP audio processing offers flexible, powerful software control of mixing, equalization, compression, loop phase shift and more.  Powerful Class D, pulse-width amplifiers maximize efficiency, and reduce size and weight.  The unit includes an RJ45 Ethernet jack for connection to Dante networks as well as analog mic and line inputs. Network control capability provides seamless, remote system set-up, operation and monitoring via laptop, tablet or other portable device.  The Digi-Loop’s dual-amplifier design offers flexibility, with the option of single 12A output for perimeter loops or dual 10A outputs for loop arrays or one loop and one loudspeaker.  

The PMU-120N is a 6-Input 120 watt mixer/amplifier with a built in digital portable media player that will playback MP3 / WMA / WAV audio files using the front panel mounted USB-A port. The PMU-120N is a 6-Input 120 watt mixer/amplifier with a built in digital portable media player that will playback MP3 / WMA / WAV audio files using the front panel mounted USB-A port. Music can be played directly from a USB memory stick without the use of an external playback device such as CD player. The PM series offers input flexibility with its 6 flexible microphone and line level selectable inputs. Direct PC USB audio input is possible via the built in USB PC sound card.

The PMU-240N is a 6-Input 240 watt mixer/amplifier with a built in digital portable media player that will playback MP3 / WMA / WAV audio files using the front panel mounted USB-A port. The PMU-240N is a 6-Input 240 watt mixer/amplifier with a built in digital portable media player that will playback MP3 / WMA / WAV audio files using the front panel mounted USB-A port. Music can be played directly from a USB memory stick without the use of an external playback device such as CD player. The PM series offers input flexibility with its 6 flexible microphone and line level selectable inputs. Direct PC USB audio input is possible via the built in USB PC sound card.

The PMU-60N is a 6-Input 60 watt mixer/amplifier with a built in digital portable media player that will playback MP3 / WMA / WAV audio files using the front panel mounted USB-A port. The PMU-60N is a 6-Input 60 watt mixer/amplifier with a built in digital portable media player that will playback MP3 / WMA / WAV audio files using the front panel mounted USB-A port. Music can be played directly from a USB memory stick without the use of an external playback device such as CD player. The PM series offers input flexibility with its 6 flexible microphone and line level selectable inputs. Direct PC USB audio input is possible via the built in USB PC sound card.

Now offering an extended 4-in, 4-out configuration together with twice the processing power via the latest version 6.3 Lake Controller release, plus industry-standard Dante® networking, the PLM 20K44 sets the benchmark for Powered Loudspeaker Management Systems. The PLM 20K44 is the natural successor of the proven, road tested, and trusted Lab.gruppen touring foundation exemplified by the iconic PLM 20000Q. Now offering an extended 4-in, 4-out configuration together with twice the processing power via the latest version 6.3 Lake Controller release, plus industry-standard Dante® networking, the PLM 20K44 sets the benchmark for Powered Loudspeaker Management Systems. The PLM 20K44 combines four channels of extremely powerful amplification with unrivalled signal processing and audio management. At the core of the system concept is the total integration of all devices – including networking, audio I/O, signal processing, amplifiers, power supply and connected mains supply – allowing complete control and monitoring of the entire platform, resulting in unique operational benefits.

The AUDAC SMQ750 is a four channel Class-D power amplifier with an output power of 4 x 750 Watt. The WaveDynamics™ DSP processor in combination with the 2.5” LCD display gives an unmatched user experience with intuitive functions overview for easy configuration. Using the optional ANI44 network interface module, connection to any DANTE-powered AV network is made possible, allowing flawless incorporation between hundreds of DANTE enabled products available in the market.

The AUDAC SMQ500 is a four channel Class-D power amplifier with an output power of 4 x 500 Watt. The WaveDynamics™ DSP processor in combination with the 2.5” LCD display gives an unmatched user experience with intuitive functions overview for easy configuration. Using the optional ANI44 network interface module, connection to any DANTE-powered AV network is made possible, allowing flawless incorporation between hundreds of DANTE enabled products available in the market.

The AUDAC SMA750 is a two channel Class-D power amplifier with an output power of 2 x 750 Watt. The WaveDynamics™ DSP processor in combination with the 2.5” LCD display gives an unmatched user experience with intuitive functions overview for easy configuration. Using the optional ANI22 network interface module, connection to any DANTE-powered AV network is made possible, allowing flawless incorporation between hundreds of DANTE enabled products available in the market.

The AUDAC SMA500 is a two channel Class-D power amplifier with an output power of 2 x 500 Watt. The WaveDynamics™ DSP processor in combination with the 2.5” LCD display gives an unmatched user experience with intuitive functions overview for easy configuration. Using the optional ANI22 network interface module, connection to any DANTE-powered AV network is made possible, allowing flawless incorporation between hundreds of DANTE enabled products available in the market.

The AUDAC SMA350 is a two channel Class-D power amplifier with an output power of 2 x 350 Watt. The WaveDynamics™ DSP processor in combination with the 2.5” LCD display gives an unmatched user experience with intuitive functions overview for easy configuration. Using the optional ANI22 network interface module, connection to any DANTE-powered AV network is made possible; allowing flawless incorporation between hundreds of DANTE enabled products available in the market.

The Ottocanali 4K4 DSP+D offers a wide range of system control and monitoring functions as well as sound shaping options, a total of 4,000 W output power at 4 ohm over 8 channels for lo-Z or distributed line systems. As with former versions of Ottocanali, the DSP+D versions feature switchable main and aux signal inputs per channel, adequate GPIO, alarms, Lo-Z and Hi-Z output connections as well as mono-bridgeable channel pairs. These two RU models implement two redundant universal switch mode power supplies with PFC (Power Factor Correction) and patented SRM (Smart Rails Management) technology that maximises the efficiency of the system as well as drastically reduces power consumption. With two redundant Dante by Audinate digital streams, the Ottocanali 4K4 DSP+D will fit any venue as ‘stand-alone’ unit, making it ideal for multi-zone applications in mid to large-scale installs.

The Ottocanali 8K4 DSP+D offers a wide range of system control and monitoring functions as well as sound shaping options, a total of 8,000 W output power at 4 ohm over 8 channels for lo-Z or distributed line systems. As with former versions of Ottocanali, the DSP+D versions feature switchable main and aux signal inputs per channel, adequate GPIO, alarms, Lo-Z and Hi-Z output connections as well as mono-bridgeable channel pairs. These two RU models implement two redundant universal switch mode power supplies with PFC (Power Factor Correction) and patented SRM (Smart Rails Management) technology that maximises the efficiency of the system as well as drastically reduces power consumption. With two redundant Dante by Audinate digital streams, the Ottocanali 8K4 DSP+D will fit any venue as ‘stand-alone’ unit, making it ideal for multi-zone applications in mid to large-scale installs.

The Ottocanali 12K4 DSP+D offers a wide range of system control and monitoring functions as well as sound shaping options, a total of 12,000 W output power at 4 ohm over 8 channels for lo-Z or distributed line systems. As with former versions of Ottocanali, the DSP+D versions feature switchable main and aux signal inputs per channel, adequate GPIO, alarms, Lo-Z and Hi-Z output connections as well as mono-bridgeable channel pairs. These two RU models implement two redundant universal switch mode power supplies with PFC (Power Factor Correction) and patented SRM (Smart Rails Management) technology that maximises the efficiency of the system as well as drastically reduces power consumption. With two redundant Dante by Audinate digital streams, the Ottocanali 12K4 DSP+D will fit any venue as ‘stand-alone’ unit, making it ideal for multi-zone applications in mid to large-scale installs.

The Extron NetPA 1001‑70V AT is a half rack 1U, convection cooled power amplifier featuring Dante™. The Extron NetPA 1001‑70V AT is a half rack 1U, convection cooled power amplifier featuring Dante™. It delivers a single channel of 100 watts at 70 volts for high impedance speaker systems. The NetPA® amplifier receives a channel of audio from a Dante-enabled device, allowing for decentralized distribution of audio throughout a building. In addition to amplifying incoming Dante audio, the NetPA amplifier features a line level output that can simultaneously feed an additional speaker zone or audio system. It is an ENERGY STAR® qualified amplifier with an Extron exclusive, highly efficient, advanced Class D amplifier design. It also features patented CDRS™ - Class D Ripple Suppression that provides improved signal fidelity over conventional Class D amplifiers.

The Extron NetPA 502 AT is a half rack 1U, convection cooled power amplifier featuring Dante™. The Extron NetPA 502 AT is a half rack 1U, convection cooled power amplifier featuring Dante™. It delivers two channels of 50 watts into 4 ohms. The NetPA® amplifier receives two channels of audio from a Dante-enabled device, allowing for decentralized distribution of audio throughout a building. In addition to amplifying incoming Dante audio, the NetPA amplifier features a 2-channel line level outputs that can simultaneously feed an additional speaker zones or audio system. It is an ENERGY STAR® qualified amplifier with an Extron exclusive, highly efficient, advanced Class D amplifier design. It also features patented CDRS™ - Class D Ripple Suppression that provides improved signal fidelity over conventional Class D amplifiers.

The Bittner 4Xe power amplifier is available in 2 models, the 4X 1200e and 4X 2000e (with 4 x 1200 watt and 4 x 2000 watts @ 4 ohms respectively), and offers front controls, analog or digital inputs, XLR or Phoenix input connectors, Speakon or Phoenix output connectors – the concept of the 4X is as flexible as its applications. Also available are audio networking via Dante™ and control via Ethernet (with SXL II) offering worldwide diagnostics and maintenance via the Internet The 4Xe and the rear control version, the 4Xi, both offer the following specifications:

• Up to 4x 2000 W in only 2 RU
• Impedance measurement
• Selectable Clip Limiter (hard/soft)
• 4-channel Dante Inputs
• SXL II Dataport (RS485)
• High Tech SMT Design
• Excellent sound and superior impulse response
• 2 separate stereo amplifiers
• Ready for 2 Ohm operation
• Protection Circuits: DC, LF, HF, Thermal, Short Circuit, Current Limiter, 3 ms Muting Delay
• XLR inputs and Speakon outputs (e version)
• Phoenix in- and outputs (i version)
• High-End switched power supply with PFC
• LED indicators for SIGNAL, CLIP, PROTECT, POWER
• Temperature controlled, variable speed low noise fans
• Digital wear-free Volume Controls (can be operated manually)
• Selectable Stereo/Bridged Mode
• Softstart
• Sequential Remote Power On
• 2 Alive Contacts
• 3 Years Warranty

The Bittner 4Xi power amplifier is available in 2 models, the 4X 1200i and 4X 2000i (with 4 x 1200 watt and 4 x 2000 watts @ 4 ohms respectively), and offers rear controls, analog or digital inputs, XLR or Phoenix input connectors, Speakon or Phoenix output connectors – the concept of the 4X is as flexible as its applications. Also available are audio networking via Dante™ and control via Ethernet (with SXL II) offering worldwide diagnostics and maintenance via the Internet The 4Xi and the front control version, the 4Xe, both offer the following specifications:

• Up to 4x 2000 W in only 2 RU
• Impedance measurement
• Selectable Clip Limiter (hard/soft)
• 4-channel Dante Inputs
• SXL II Dataport (RS485)
• High Tech SMT Design
• Excellent sound and superior impulse response
• 2 separate stereo amplifiers
• Ready for 2 Ohm operation
• Protection Circuits: DC, LF, HF, Thermal, Short Circuit, Current Limiter, 3 ms Muting Delay
• XLR inputs and Speakon outputs (e version)
• Phoenix in- and outputs (i version)
• High-End switched power supply with PFC
• LED indicators for SIGNAL, CLIP, PROTECT, POWER
• Temperature controlled, variable speed low noise fans
• Digital wear-free Volume Controls (can be operated manually)
• Selectable Stereo/Bridged Mode
• Softstart
• Sequential Remote Power On
• 2 Alive Contacts
• 3 Years Warranty