DELEC – unito NAM 603


More details

Similar Products

Powersoft-T304_front_big
  • Powersoft

Powersoft – T304

The T Series is a very flexible and cost effective amplifier platform loudspeaker processor The T Series is a very flexible and cost effective amplifier platform loudspeaker processor. All models deliver the same high peak voltage allowing high SPL with single 8/16 ohm cabinets on all models. The high voltage is also good for sharing power between the channels for applications such as bi-amped loudspeakers or subwoofers with passive tops. The amplifiers feature input via Dante, AES3 and analog. The Dante and AES3 solutions are optimized for daisy-chained distribution of 2-channel audio for distribution to many amplifiers without the need for external switches/repeaters/ splitters. A simple Dante system has a daisy chain with the mixing console at one end and a WiFi access point at the other end and the amplifiers in-between.
    Amplifiers
  • Dante Ch: 4x4
  • 48kHz-96kHz
MA15075D
  • Alfatron

ALF-MA15075D

The ALF-MA15075D is a compact digital mixing amplifier designed for low or high impedance applications. The mode selector switch allows it to deliver either two channels of 75 watts per channel into 4 or 8 Ω, or a single channel of 150 watts at 70 or 100 V. The use of a Class-D amplifier provides power efficiency and energy-saving. In addition to the amplified speaker output, a line level audio output allows the mixed audio signals to be sent to an additional amplifier or other audio system. Feature:
  •  Inputs: 2 x Dante audio, 1 x optical audio, Stereo balanced analog input, 2 x balanced microphone inputs
  • Outputs: 1 x balanced line level outputs, Stereo Low Impedance amp out, 1 x 70V/100V amplifier output
  • Selectable low or high-impedance operation.
  • 2 x 75 watts @ 4 or 8 Ω.
  • 1 x 150 watts @ 70 or 100 V.
  • Class-D amplifier design.
  • Automatic standby after a period of inactivity to minimize power consumption.
  • Rear panel input level controls for setting Microphones input gain.
  •  Low inrush current to prevent audible “thumps” when multiple amps are powered on simultaneously.
  • Balanced analog audio output for pass-through to an additional amplifier or audio system.
  • Basic integrated DSP functions including five-band Graphic equalizer.
  • GUI Webserver with TCP/IP control for remote control or third-party integration.
  • Trigger port for external mute/ unmute trigger.
  • Front panel signal status LEDs for power, panel button lock, audio source, mute, and real-time volume level.
  • 1U Size
    Amplifiers
  • Dante Ch: 2x0
aurora-dtx-amp1|aurora-dtx-amp1
  • Aurora Multimedia

Aurora Multimedia – DTX-AMP1

The DTX-AMP1 is the world’s first PoE++ 2x35 watt Dante ® amplifier to integrate IP control and audio DSP functionality. The audio DSP allows parametric equalization, noise reduction, mixing, volume control, audio ducking, and more. The DTX-AMP1 is the world’s first PoE++ 2x35 watt Dante ® amplifier to integrate IP control and audio DSP functionality. The audio DSP allows parametric equalization, noise reduction, mixing, volume control, audio ducking, and more. The IP control allows for any 3 rd party control system to use the DTX-AMP1 RS- 232, IR, Digital I/O, and relays as a IP port expander.  Aurora’s DTX-AMP1 also has a variety of audio inputs and outputs with two balanced L/R line inputs, one of which can be selected as 2 independent L/R unbalanced inputs, L/R balanced line output, S/PDIF, and L/R amplifier output. The amplifier will operate at full power with external power supply of 70W total. Depending on PoE class type connected, the DTX-AMP1 can supply up to 60W of total power
    Amplifiers
  • Dante Ch: 2x0