Dante-enabled Product Catalog
The Linea Research 88C06-DANTE offers a unique combination of power and audio performance, combined with advanced DSP and network control. With all 8 channels driven the 88C06-Dante delivers 750W per channel into 2, 4 or 8 Ohms as well as 70 volt.
The Linea Research 88C06-DANTE offers a unique combination of power and audio performance, combined with advanced DSP and network control. With all 8 channels driven the 88C06-Dante delivers 750W per channel into 2, 4 or 8 Ohms as well as 70 volt.
Linea Research 88C Series amplifiers offer 8-channels of sonically pure Class D amplification combined with 96kHz digital signal processing and networked control as standard. Highly efficient auto-sensing power supplies support operation from 85V to 240V.
The Linea Research 48M10-DANTE offers a unique combination of power and audio performance, combined with advanced DSP and network control. With all 8 channels driven the 48M10-Dante delivers 1250W per channel into 2, 4 or 8 Ohms as well as 70 volt.
The Linea Research 48M10-DANTE offers a unique combination of power and audio performance, combined with advanced DSP and network control. With all 8 channels driven the 48M10-Dante delivers 1250W per channel into 2, 4 or 8 Ohms as well as 70 volt.
Linea research 48M Series amplifiers offer 8-channels of sonically pure Class D amplification combined with 96kHz digital signal processing and networked control as standard. Highly efficient auto-sensing power supplies support operation from 85V to 240V.
Delta Series offers the assurance of MC2’s highest quality audio power amp technology with future proofing via the inclusion of simple to use digital audio networking.
Delta Series offers the assurance of MC2’s highest quality audio power amp technology with future proofing via the inclusion of simple to use digital audio networking.
A rear panel switch allows the amplifier to accept either four channels of analogue audio or pick up four channels of networked audio, via Dante, which is then converted using 24 bit 96kHz DACs.
Connect to a Delta DSP amplifier using a single CAT5 cable to realise a stereo 4 way system with no further external processing required. Switch back to analogue to use as a powerful traditional quad channel amplifier.
Run bridged channel pairs or link adjacent inputs for total flexibility in either analogue or digital mode.
Delta Series offers the assurance of MC2’s highest quality audio power amp technology with future proofing via the inclusion of simple to use digital audio networking.
Delta Series offers the assurance of MC2’s highest quality audio power amp technology with future proofing via the inclusion of simple to use digital audio networking.
A rear panel switch allows the amplifier to accept either four channels of analogue audio or pick up four channels of networked audio, via Dante, which is then converted using 24 bit 96kHz DACs.
Connect to a Delta DSP amplifier using a single CAT5 cable to realise a stereo 4 way system with no further external processing required. Switch back to analogue to use as a powerful traditional quad channel amplifier.
Run bridged channel pairs or link adjacent inputs for total flexibility in either analogue or digital mode.
Delta Series offers the assurance of MC2’s highest quality audio power amp technology with future proofing via the inclusion of simple to use digital audio networking.
Delta Series offers the assurance of MC2’s highest quality audio power amp technology with future proofing via the inclusion of simple to use digital audio networking.
A rear panel switch allows the amplifier to accept either four channels of analogue audio or pick up four channels of networked audio, via Dante, which is then converted using 24 bit 96kHz DACs.
Connect to a Delta DSP amplifier using a single CAT5 cable to realise a stereo 4 way system with no further external processing required. Switch back to analogue to use as a powerful traditional quad channel amplifier.
Run bridged channel pairs or link adjacent inputs for total flexibility in either analogue or digital mode.
Delta Series offers the assurance of MC2’s highest quality audio power amp technology with future proofing via the inclusion of simple to use digital audio networking.
Delta Series offers the assurance of MC2’s highest quality audio power amp technology with future proofing via the inclusion of simple to use digital audio networking.
A rear panel switch allows the amplifier to accept either four channels of analogue audio or pick up four channels of networked audio, via Dante, which is then converted using 24 bit 96kHz DACs.
Connect to a Delta DSP amplifier using a single CAT5 cable to realise a stereo 4 way system with no further external processing required. Switch back to analogue to use as a powerful traditional quad channel amplifier.
Run bridged channel pairs or link adjacent inputs for total flexibility in either analogue or digital mode.
Quattrocanali offers the traditionally amazing sound quality and reliability of all Powersoft products.
Quattrocanali offers the traditionally amazing sound quality and reliability of all Powersoft products. The patented SRM (Smart Rails Management) technology allows to maximize the the efficiency of the system.
With Output Powers ranging form 300W to 1200W per channel, in depth control and monitoring capabilities, Quattrocanali is designed to be conveniently tailored to all small to medium sized installation project.
Quattrocanali offers the traditionally amazing sound quality and reliability of all Powersoft products.
Quattrocanali offers the traditionally amazing sound quality and reliability of all Powersoft products. The patented SRM (Smart Rails Management) technology allows to maximize the the efficiency of the system.
With Output Powers ranging form 300W to 1200W per channel, in depth control and monitoring capabilities, Quattrocanali is designed to be conveniently tailored to all small to medium sized installation project.
Quattrocanali offers the traditionally amazing sound quality and reliability of all Powersoft products.
Quattrocanali offers the traditionally amazing sound quality and reliability of all Powersoft products. The patented SRM (Smart Rails Management) technology allows to maximize the the efficiency of the system.
With Output Powers ranging form 300W to 1200W per channel, in depth control and monitoring capabilities, Quattrocanali is designed to be conveniently tailored to all small to medium sized installation project.
The D10-2 Dante digital amplifier is a 10 Amp dual output class 'D' driver; meaning a 60%+ increase in energy efficiency over existing solutions.
The D Series represents the global benchmark for digital audio hearing loop systems. The compact, elegant and sturdy units not only feature digital signal processing and networking functionality, but are also the most versatile and powerful solution available.
The D14-2 Dante digital amplifier is a 14 Amp dual output class 'D' driver; meaning a 60%+ increase in energy efficiency over existing solutions. D Series drivers feature capacitive touch front panels with intuitive menus, built in test signals, and are fully networkable with a Wi-Fi accessible standard browser based control panel for remote set-up, monitoring and email alerts. Dante versions also feature a Dante specific RJ45 input for plug and play Dante network audio.
The D14-2 Dante features 14 Amps per loop output plus ample voltage headroom, making it the most powerful and flexible solution on the market, suitable for a huge range of applications. The added power of the D14-2 Dante provides a solution for installations in environments containing very high levels of metal, or high ceilings previously not possible without the use of combiners.
In another first for high-power Class D Induction Loop drivers, installation can be performed with total confidence, as unique multi-stage filtering ensures compatibility with both other system equipment and global EMC regulations. The D14-2 Dante also boasts Dual slope Metal Loss Control that caters for a wide range of metal loss frequency characteristics.
Features
- Dante input for network audio
- Drives 2 output channels at 14ARMS each, featuring accurate and stable 90° phase shift
- Networkable with remote browser interface
- Digital display & intuitive 'touch' menu system
- 3 modes; Main, Status & Quick
- Highly energy efficient Class-D amplifier with low heat dissipation
- Up to 2 x 1,000m2 Perimeter Loops area coverage
- Up to 3,300m2 MultiLoop™ Low Loss area coverage
- Compact 1U rack mount unit with internal transformer for simple rack installation
- Optimised for speech frequencies with unmatched intelligibility & capable of high quality musical reproduction
- AGC & Dual Slope MLC
- Active status monitoring & remote fault reporting via email
- Data compliant with: IEC 62489-1 Standard
Applications include
- Lecture Theatres & Conference facilities
- Stadia, Sports Halls, Cinemas & Theatres
- Courts Rooms, Airports & Railway Stations
- Dante Ch: 2x0
- 44.1kHz-48kHz
The D10-2 Dante digital amplifier is a 10 Amp dual output class 'D' driver; meaning a 60%+ increase in energy efficiency over existing solutions.
The D Series represents the global benchmark for digital audio hearing loop systems. The compact, elegant and sturdy units not only feature digital signal processing and networking functionality, but are also the most versatile and powerful solution available.
The D10-2 Dante digital amplifier is a 10 Amp dual output class 'D' driver; meaning a 60%+ increase in energy efficiency over existing solutions. D Series drivers feature capacitive touch front panels with intuitive menus, built in test signals, and are fully networkable with a Wi-Fi accessible standard browser based control panel for remote set-up, monitoring and email alerts. Dante versions also feature a Dante specific RJ45 input for plug and play Dante network audio.
The D10-2 Dante features 10 Amps per loop output plus ample voltage headroom, making it the most flexible solution on the market, suitable for a huge range of applications. The added power of the D10-2 Dante provides a solution for installations in environments containing very high levels of metal, previously not possible without the use of combiners.
In another first for high-power Class D Induction Loop drivers, installation can be performed with total confidence, as unique multi-stage filtering ensures compatibility with both other system equipment and global EMC regulations. The D10-2 Dante also boasts Dual slope Metal Loss Control that caters for a wide range of metal loss frequency characteristics.
Features
- Dante input for network audio
- Drives 2 output channels at 10ARMS each, featuring accurate and stable 90° phase shift
- Networkable with remote browser interface
- Digital display & intuitive 'touch' menu system
- 3 modes; Main, Status & Quick
- Highly energy efficient Class-D amplifier with low heat dissipation
- Up to 2 x 1,000m2 Perimeter Loops area coverage
- Up to 3,300m2 MultiLoop™ Low Loss area coverage
- Compact 1U rack mount unit with internal transformer for simple rack installation
- Optimised for speech frequencies with unmatched intelligibility & capable of high quality musical reproduction
- AGC & Dual Slope MLC
- Active status monitoring & remote fault reporting via email
- Data compliant with: IEC 62489-1 Standard
Applications include
- Lecture Theatres & Conference facilities
- Stadia, Sports Halls, Cinemas & Theatres
- Courts Rooms, Airports & Railway Stations
The D7-2 Digital Hearing Loop Amplifier represents the global benchmark for digital audio induction loop systems. Featuring all the benefits of the Standard D14-2 driver with added Dante Input for additional Network Audio.
The D7-2 Digital Hearing Loop Amplifier represents the global benchmark for digital audio induction loop systems. Featuring all the benefits of the Standard D14-2 driver with added Dante Input for additional Network Audio.
The D Series range consists of 4 class 'D' drivers (3 dual loop output and 1 single output models); meaning a 60%+ increase in energy efficiency over existing solutions. Drivers feature capacitive touch front panels with intuitive menus, built in test signals, and are fully networkable with a Wi-Fi accessible standard browser based control panel for remote set-up, monitoring and email alerts.
The D7-2 Dante features 7 Amps per loop output respectively plus ample voltage headroom, making it the most flexible solution on the market, suitable for a huge range of applications.
In another first for high-power Class D Induction Loop drivers, installation can be performed with total confidence, as unique multi-stage filtering ensures compatibility with both other system equipment and global EMC regulations. The D Series also boasts Dual slope Metal Loss Control that caters for a wide range of metal loss frequency characteristics.
Features
- Dante Input for additional Network Audio
- Single or dual output options. Dual outputs featuring accurate and stable 90° phase shift
- Networkable with remote browser interface
- Digital display & intuitive 'touch' menu system - 3 modes; Main, Status & Quick
- Highly energy efficient Class-D amplifiers with low heat dissipation
- Up to 2 x 650m2 Perimeter Loops area coverage
- Up to 3,300m2 MultiLoop™ Low Loss area coverage
- Compact 1U rack mount unit with internal transformer for simple rack installation
- Optimised for speech frequencies with unmatched intelligibility & capable of high quality musical reproduction
- AGC & Dual Slope MLC
- Active status monitoring & remote fault reporting via email
- Data compliant with: IEC 62489-1 Standard
Applications include
- Lecture Theatres & Conference facilities
- Stadia, Sports Halls, Cinemas & Theatres
- Courts Rooms, Airports & Railway Stations
The NT4-K6 Engine offers a 4in 4out topology. With 6000W flexible power, FIR Filter and all available DSP technology, It provides a networkable, highly sophisticated DSP and amplifier solution. This ensures worldwide optimal performance with every Loudspeaker System.
The NT4-K6 four channel amplifier was developed for mobile and installed applications which requires medium power. It has the same DSP Engine as the NT4-DSP and the NT3-K4. With setups for all AD-Systems products and even customized settings, this amplifier is a perfect choice.
The NT4-K6 has Delays in the input and output of 500msec each, RMS- and Peaklimiters, FIR Filters, an open Edit Architecture for custom settings, and many features more.
- 4in 4out Powered Loudspeaker Controller
- 4 x 1.600W @ 4 Ohms
- Active PFC for worldwide Operation
- Presets for all AD-Systems products on board
- Open Edit Architecture for Custom Setups
- Future-upgradeable
- Dante™ Audio
The well-known and reliable amplifier systems PA‑900 and AKB‑160 now feature a 2-channel Dante™ module which turns them into Dante™ instreamers for versatile applications.
The well-known and reliable amplifier systems PA‑900 and AKB‑160 now feature a 2-channel Dante™ module which turns them into Dante™ instreamers for versatile applications. They are able to receive one digital stereo signal or two mono signals via the RJ45 connections. These signals are converted into an analogue audio signal, amplified and then streamed. Thus, it is possible to integrate an analogue speaker system into a digital Dante network.
The well-known and reliable amplifier systems PA‑900 and AKB‑160 now feature a 2-channel Dante™ module which turns them into Dante™ instreamers for versatile applications.
The well-known and reliable amplifier systems PA‑900 and AKB‑160 now feature a 2-channel Dante™ module which turns them into Dante™ instreamers for versatile applications. They are able to receive one digital stereo signal or two mono signals via the RJ45 connections. These signals are converted into an analogue audio signal, amplified and then streamed. Thus, it is possible to integrate an analogue speaker system into a digital Dante network.
RAM Audio V9004 (W9004) is a four channels amplifier able to deliver 9000 W into 2 Ohm equipped with advanced FIR DSP, complete monitoring and control via proprietary OCS System and Dante digital audio networking.
RAM Audio V9004 (W9004) is a heavy duty audio power amplifier equipped with PFC QuantaPulse Regulated Dual SMPS to fulfil the most exigent applications. This amp delivers 9000 W into 2 Ohm comprising a complete set of useful features such as digital control and monitoring with an extra-large LCD display, on board advanced FIR DSP, USB or Ethernet connection for full monitoring and control via OCS System, digital AES3 inputs and featuring Dante digital audio networking.
RAM Audio V9044 (W9044) is a four channels amplifier able to deliver 9000 W into 4 Ohm equipped with advanced FIR DSP, complete monitoring and control via proprietary OCS System and Dante digital audio networking.
RAM Audio V9044 (W9044) is a heavy duty audio power amplifier equipped with PFC QuantaPulse Regulated Dual SMPS to fulfil the most exigent applications. This four channels amp delivers 9000 W into 4 Ohm comprising a complete set of useful features such as digital control and monitoring with an extra-large LCD display, on board advanced FIR DSP, USB or Ethernet connection for full monitoring and control via OCS System, digital AES3 inputs and featuring Dante digital audio networking.
RAM Audio V12004 (W12004) is a four channels amplifier able to deliver 12000 W into 2 Ohm equipped with advanced FIR DSP, complete monitoring and control via proprietary OCS System and Dante digital audio networking.
RAM Audio V12004 (W12004) is a heavy duty audio power amplifier equipped with PFC QuantaPulse Regulated Dual SMPS to fulfil the most exigent applications. This four channels amp delivers 12000 W into 2 Ohm comprising a complete set of useful features such as digital control and monitoring with an extra-large LCD display, on board advanced FIR DSP, USB or Ethernet connection for full monitoring and control via OCS System, digital AES3 inputs and featuring Dante digital audio networking.
RAM Audio V12044 (W12044) is a four channels amplifier able to deliver 12000 W into 4 Ohm equipped with advanced FIR DSP, complete monitoring and control via proprietary OCS System and Dante digital audio networking.
RAM Audio V12044 (W12044) is a heavy duty audio power amplifier equipped with PFC QuantaPulse Regulated Dual SMPS to fulfil the most exigent applications. This four channels amp delivers 12000 W into 4 Ohm comprising a complete set of useful features such as digital control and monitoring with an extra-large LCD display, on board advanced FIR DSP, USB or Ethernet connection for full monitoring and control via OCS System, digital AES3 inputs and featuring Dante digital audio networking.
The Digi-Loop’s amplifier design offers either single or dual 9.5 A rms loop outputs for perimeter loop(s), single array(s), dual loop, or phased-array configuration. A 70-100 V input provides connection to a distributed speaker/paging system, ensuring announcements are heard by loop users.
Digi-Loop is definitely state-of-the-art – the first of its kind to maximize modern amplifier technology. Its network-control capability provides seamless, remote system set-up, operation and monitoring via laptop or tablet. DSP audio processing offers flexible, powerful software control of mixing, equalization, compression and more. Powerful Class D, pulse-width amplifiers maximize efficiency.
The Digi-Loop’s amplifier design offers either single or dual 9.5 A rms loop outputs for perimeter loop(s), single array(s), dual loop, or phased-array configuration. A 70-100 V input provides connection to a distributed speaker/paging system, ensuring announcements are heard by loop users.
system includes
(1) PLA DL107 NET D Loop Amplifier
(1) WLC 004 Line Cord (US)
(1) IDP 009 ADA Wall Plaque (t-coil)
The Digi-Loop’s amplifier design offers either single or dual 9.5 A rms loop outputs for perimeter loop(s), single array(s), dual loop, or phased-array configuration. A 70-100 V input provides connection to a distributed speaker/paging system, ensuring announcements are heard by loop users.
Digi-Loop is definitely state-of-the-art – the first of its kind to maximize modern amplifier technology. Its network-control capability provides seamless, remote system set-up, operation and monitoring via laptop or tablet. DSP audio processing offers flexible, powerful software control of mixing, equalization, compression and more. Powerful Class D, pulse-width amplifiers maximize efficiency.
The Digi-Loop’s amplifier design offers either single or dual 9.5 A rms loop outputs for perimeter loop(s), single array(s), dual loop, or phased-array configuration. A 70-100 V input provides connection to a distributed speaker/paging system, ensuring announcements are heard by loop users.
system includes
(1) PLA DL207 NET D Loop Amplifier
(1) WLC 004 Line Cord (US)
(1) IDP 009 ADA Wall Plaque (t-coil)
The Digi-Loop’s amplifier design offers dual 12 A rms loop outputs for perimeter loop(s), single array(s), dual loop, or phased-array configuration. A 70-100 V input provides connection to a distributed speaker/paging system, ensuring announcements are heard by loop users.
Digi-Loop is definitely state-of-the-art – the first of its kind to maximize modern amplifier technology. Its network-control capability provides seamless, remote system set-up, operation and monitoring via laptop or tablet. DSP audio processing offers flexible, powerful software control of mixing, equalization, compression and more. Powerful Class D, pulse-width amplifiers maximize efficiency.
The Digi-Loop’s amplifier design offers dual 12 A rms loop outputs for perimeter loop(s), single array(s), dual loop, or phased-array configuration. A 70-100 V input provides connection to a distributed speaker/paging system, ensuring announcements are heard by loop users.
System includes:
(1) DL 210 NET D 2.0 Loop Amplifier
(1) WLC 004 Line Cord (US)
(1) IDP 009 ADA Wall Plaque (t-coil)
The cutting-edge PPA T45 NET D transmitter offers control or monitoring capability from any remote location, Dante™ input, multiple digital audio input options, and an OLED high-resolution screen with easy-to-manage menu navigation.
The cutting-edge PPA T45 NET D transmitter offers control or monitoring capability from any remote location, Dante™ input, multiple digital audio input options, and an OLED high-resolution screen with easy-to-manage menu navigation. Features 3 powerful microprocessors and the same high-quality audio and RF performance you’ve come to expect from Williams Sound. It’s technology that takes the guesswork out of complex audio installation. Simply select among voice, music, or hearing assistance in the application preset menu, and this transmitter quickly configures itself. With a range of up to 1000 feet, the PPA T45NET D is ideal for large venues where superior coverage is essential.
System includes:
PPA T45NET D transmitter
(1) ANT 025 antenna
(1) TFP 048 power supply
(1) WLC 004 Main Power Cord (U.S.)
(1) WCA 013 RCA Audio Cable, 3ft.
*All items can be purchased separately
The WP-DN700 is a digital amplifier with high efficiency and high reliability design.
The 2U size achieves a total output of 2000 W or more in total.
Digital amplifier with high efficiency and high reliability design.
- WP-DN 700 is 2 ch power amplifier with maximum output 1000 W × 2 (4 Ω load).
- Due to the adoption of class D amplifier circuit and switching power supply, power loss is greatly reduced and space saving is realized.
- Equipped with a muting circuit to prevent pop noise when turning on / off the power switch.
- Overcurrent protection circuit that prevents overdrive in case of overload · output short circuit, equipped with overtemperature protection circuit to prevent abnormal heating of the power supply circuit · output circuit.
- Speaker protection circuit protects the speaker by cutting off the output when the output circuit fails.
- Equipped with protect indicator lights, inform the operating status of the protection circuit and system oscillation (when signals exceeding 20 kHz are continuously input).
- Corresponds to EIA rack mount.
- BTL (Bridged Trans- connect) connection that uses output of 2 ch as output of 1 ch can be used as a power amplifier of 1120 W × 2 (8 Ω load) with WP-DN 360.
The WP-DN360 is a digital amplifier with high efficiency and high reliability design.
The WP-DN360 is a digital amplifier with high efficiency and high reliability design.
- WP-DN 360 is 4 ch with maximum output 560 W × 4 (4 Ω load)
- Due to the adoption of class D amplifier circuit and switching power supply, power loss is greatly reduced and space saving is realized.
- Equipped with a muting circuit to prevent pop noise when turning on / off the power switch.
- Overcurrent protection circuit that prevents overdrive in case of overload · output short circuit, equipped with overtemperature protection circuit to prevent abnormal heating of the power supply circuit · output circuit.
- Speaker protection circuit protects the speaker by cutting off the output when the output circuit fails.
- Equipped with protect indicator lights, inform the operating status of the protection circuit and system oscillation (when signals exceeding 20 kHz are continuously input).
- Corresponds to EIA rack mount.
- BTL (Bridged Trans- connect) connection that uses output of 2 ch as output of 1 ch can be used as a power amplifier of 1120 W × 2 (8 Ω load) with WP-DN 360.
MDA4-1000M is designed to meet the most demanding portable and fixed installation sound systems, providing a full set of value added features such as efficient cooling system, on board DSP and USB/Ethernet for monitoring and control via PC software.
MDA4-1000M is designed to meet the most demanding portable and fixed installation sound systems, providing a full set of value added features such as efficient cooling system, on board DSP and USB/Ethernet for monitoring and control via PC software. The 4 output stages use the well-proven Pascal Class D SA-2 module, obtaining ultra low distortion, high efficiency and also equipped with a full set of circuit protections. MDA4-1000M is also a capable and sophisticated loudspeaker processor, with powerful M716 DSP running 96 kHz / 24 bit and high performance 24bit AD/DA Converters. It offers 4 channels of slope up to 48dB/Oct IIR HP/LP crossover filters, or up to 512 taps FIR filters[FIR coefficients can be imported as .txt file from external application] , RMS compressor, parametric Eqs , alignment delay and white/pink noise internal generator, everything needed to optimize a loudspeaker system. A 12dB headroom process is available.
The DQ10 is a lightweight four-channel Class D switchmode power amplifier designed to give the best performance from any loudspeaker within the EM Acoustics product range, with advanced DSP and networking capabilities.
The DQ10 is a lightweight four-channel Class D switchmode power amplifier designed to give the best performance from any loudspeaker within the EM Acoustics product range, with advanced DSP and networking capabilities.
- High power-to-size ratio
- Full front panel user interface
- Ethernet network for system operation and monitoring
- Analogue, AES3, and Dante™ digital network audio inputs
- Powerful grouping and multi-layer equalisation
The DQ Series of advanced system amplifiers offer a unique combination of high power and audio performance, seamlessly combined with advanced DSP and network control. The DQ Series offers three models, physically identical four-in-four-out amplifiers but with varying total output power configurations of 6,000 watts (DQ6), 10,000 watts (DQ10) and 20,000 watts (DQ20) to suit specific loudspeaker models and audio applications. The DQ Series models offer extremely high power density in a convenient and flexible format for both mobile applications and installations alike.
