Dante-enabled Product Catalog

▲ 4 audio (digital signal) inputs, 2 audio (digital signal) outputs, external GPIO

▲ ARM processor cooperates with embedded operating system to expand Cirrus Logic Audio Codec

▲ 24-bit, Σ- △ AD / DA, 44.1kHz, 48kHz, 88.2kHz, 96kHz sampling rates are optional,

▲ I2S digital audio format

▲ Freely set the sampling rate and equipment name

▲ Network audio transmission and control use standard Category 5 network cable (CAT5)

▲ Supports PCM16, PCM24, and PCM32 encodings, and can also use custom encoding formats

▲ 2 audio (digital signal) inputs, 2 audio (digital signal) outputs, external GPIO

▲ ARM processor cooperates with embedded operating system to expand Cirrus Logic Audio Codec

▲ 24-bit, Σ- △ AD / DA, 44.1kHz, 48kHz, 88.2kHz, 96kHz sampling rates are optional,

▲ I2S digital audio format

▲ Freely set the sampling rate and equipment name

▲ Network audio transmission and control use standard Category 5 network cable (CAT5)

▲ Supports PCM16, PCM24, and PCM32 encodings, and can also use custom encoding formats

▲ 2 audio (digital signal) inputs, 2 audio (digital signal) outputs, external GPIO

▲ ARM processor cooperates with embedded operating system to expand Cirrus Logic Audio Codec

▲ 24-bit, Σ- △ AD / DA, 44.1kHz, 48kHz, 88.2kHz, 96kHz sampling rates are optional,

▲   I2S digital audio format

▲ Freely set the sampling rate and equipment name

▲ Network audio transmission and control use standard Category 5 network cable (CAT5)

▲ Supports PCM16, PCM24, and PCM32 encodings, and can also use custom encoding formats

▲ 4 audio (digital signal) inputs, 2 audio (digital signal) outputs, external GPIO

▲ ARM processor cooperates with embedded operating system to expand Cirrus Logic Audio Codec

▲ 24-bit, Σ- △ AD / DA, 44.1kHz, 48kHz, 88.2kHz, 96kHz sampling rates are optional,

▲   I2S digital audio format

▲ Freely set the sampling rate and equipment name

▲ Network audio transmission and control use standard Category 5 network cable (CAT5)

▲ Supports PCM16, PCM24, and PCM32 encodings, and can also use custom encoding formats

MAP0808M-D4 is equipped with 8 analog inputs and 8 analog outputs, of which 4 input and output channels can be switched to Dante network audio input and output. DSP chip based on ADI 300MIPS processing rate to meet daily processing functions. Equipped with exclusive upper computer software , which can switch various inputs and change inputs, phantom power, etc. through the software. At the same time, software can adjust conventional parameters such as gain, noise gate, delay, phase, mute, and equalizer. Supports full matrix mixing mode, any input can be connected or mixed to any output at any ratio. Through USB-HDI eliminating connector or serial connection control in the control, all the parameters can be adjusted in real-time.

MAP08A is a 16- in- 16- out auto-mixing media matrix, equipped with 8 analog inputs and 8 analog outputs, built-in feedback suppression, automatic mixing, matrix mixing, equalizer, distributor, compressor and other DSP functions. This device supports Dante network audio function expansion. It can be connected to computer software control via USB driver-free , RS232, RS485, TCP / IP connection and remote control. It is suitable for sound reinforcement projects in various occasions.

Dante DP PoE Speaker is multifunctional with either POE power supply or 2 4VDC, audio transmission and signal control via a RJ45 Ethernet port. It can obtain power supply from any Ethernet switch of 802.3 or above standard. Over Dante™ Ethernet that transmits 24-bit audio (44.1K/48KHz) its control signal can be routed through the Dante™ Controller. All these functions can perform remotely on the PC or Mac by Dante Controller Software.

Dante DP3 PoE Speaker is equipped with POE power supply, audio transmission and signal control via a RJ45 Ethernet port. It can obtain power from any Ethernet switch of 802.3 or above standard. Dante DP3 adopts SSA inverter technology allowing that the high-quality enlargement of superior sound quality on this compact speaker of low power design. The system is built with a plastic body and 4pcs 3 inch high efficient Neodymium driver. Over Dante™ Ethernet that transmits 24-bit audio (44.1K/48KHz) and its control signal can be routed through the Dante™ Controller. Dante DP3 integrates versatile functions like gain control, mute control, 5-band equalizer control and DSP with limit control. All these functions can perform remotely on the PC or Mac by DS Controller Software.

Features:

1. Built-in Dante module
2. Built-in power amplifier module and system efficiency > 70%
3. DSP controlling software
4. PoE power supply
5. Over-current protection, Thermal protection and Overload protection

DMIC Dante Microphone is a microphone with a built-in Dante module supporting POE power supply. It can be directly connected to the Dante network, providing you a rewarding experience with extremely low latency, high fidelity and a low cost solution for paging and announcement.

Features:

Built-in Dante module
Rotate gain control
POE power supply
Smart on/off switch

Dante Panel series wall-mounted interface machines boast analog input and Dante digital input, analog line output and Dante digital output. The analog inputs support phantom power and manual preamp-gain adjustment. It is suitable for conference rooms and other professional applications. It available in black and white color.

Dante DSP 0404 Transmitter is designed for Dante network audio transmission and routing transfer of high quality and low latency network audio transmissionin multimedia systems.

DSP 0404 has analog channels of 4 balance input and 4 balance output. It can also provide phantom power for your microphone, as well as mute and gain adjustment on PC controlling software.

Features:

1. PoE power supply & DC12V power supply
2. Built-in Dante module
3. 4 balance input + 4 balance output
4. 48V phantom power supply
5. Windows software included

Features:

· High-performance ADI DSP processor, high-fidelity and low-noise 24-bit A / D and D / A conversion;

· Built-in Dante network transmission module, support 4 Dante signals / 4 analog signal inputs, 4 sets of digital power amplification output;

· With limited amplitude, frequency division, delay, PEQ, mute, inversion, gain adjustment, level indication functions, etc .;

· Multiple sets of scene save, recall, import and export functions;

· USB / network control interface, it can realize PC control for parameter configuration, scene recall and save;

· 3.97-inch color TFT resistive touch screen, Chinese and English menu operation, more comprehensive and intuitive display content

· Switch protection against shock, overcurrent, overheating, temperature detection after overheating protection, short circuit, DC protection;

This Dante adapter is designed with one RJ45 Dante input and two XLR analog outputs. This product enables simple connection of analog equipment to a Dante network, and can  receive audio channels from a Dante network and provide studio-quality, low-latency audio via an XLR connector to analog audio equipment. Any audio available on the Dante network can be routed via the XLR outputs to an amplifier, powered speaker, mixing console, digital signal processor(DSP), or other analog audio equipment.

Analog output version:Dante signal turns into analog audio signal output, when connecting an amplifier, a speaker, etc.

Analog input version: analog audio signal turns into Dante signal output, which is suitable for mixer, instrument, etc.

As with other Dante products, the freely available Dante Controller software application is used to automatically discover and configure Dante analog output module to the Dante network. Device names, channel labels, signal routing and other parameters(for example, sample rate and latency) can be configured via the network using Dante Controller. A variety of network and clock synchronisation diagnostic tools are also available in Dante Controller.

This Dante adapter uses Power over Ethernet(PoE). Power can be provided from a PoE-capable network switch, or from a separate PoE injector.

Features

1). PoE-based active speaker P14WA is an audio power module with 60w/4Ω output, which adopts the latest PoE technical standard. With only one network cable can realize power supply and Dante digital audio signal transmission and control;

2). Integrate PoE power supply and Dante audio data transmission to simplify cable layout and conform to Ethernet engineering specifications;

3). Digital and networked audio transmission realizes, high expendable system;

4). Distributed digital audio system: a large audio system of multiple input and output devices, decentralized audio device connection,  software routing and signal distribution;

5). Using Dante Controller software can easily realize fully networked Dante device detection and audio routing configuration;

6). Power amplifier features single RJ-45, 100Mbps of Dante audio transmission rate, routing control via Dante Controller, parametric volume, mute, limit, EQ and noise gate(optional) control, over-current, high temperature, overload/short circuit protection, natural heat dissipation;

7). Digital EQ adjustment and crossover. User can easily set EQ points and crossover frequencies matching the speaker.

The parameters and data set by user can be saved to the computer, the data on the computer and the machine can be read and called from each other;

8). PoE network cabling adopts the 48V DC power supply carried by Ethernet cable, free from all restrictions of high-voltage AD cabling, better satisfying the safety and fire prevention regulations;

9). Can be widely used in banquet hall/function hall, classroom, conference room, theme park, etc.

This Dante adapter is designed with one RJ45 Dante input and two XLR analog outputs. This product enables simple connection of analog equipment to a Dante network, and can  receive audio channels from a Dante network and provide studio-quality, low-latency audio via an XLR connector to analog audio equipment. Any audio available on the Dante network can be routed via the XLR outputs to an amplifier, powered speaker, mixing console, digital signal processor(DSP), or other analog audio equipment.

Analog output version:Dante signal turns into analog audio signal output, when connecting an amplifier, a speaker, etc.

Analog input version: analog audio signal turns into Dante signal output, which is suitable for mixer, instrument, etc.

As with other Dante products, the freely available Dante Controller software application is used to automatically discover and configure Dante analog output module to the Dante network. Device names, channel labels, signal routing and other parameters(for example, sample rate and latency) can be configured via the network using Dante Controller. A variety of network and clock synchronisation diagnostic tools are also available in Dante Controller.

This Dante adapter uses Power over Ethernet(PoE). Power can be provided from a PoE-capable network switch, or from a separate PoE injector.

Features

1). PoE-based active speaker P14CA(ceiling) is an audio power module with 60w/4Ω output, which adopts the latest PoE technical standard. With only one network cable can realize power supply and Dante digital audio signal transmission and control;

2). Integrate PoE power supply and Dante audio data transmission to simplify cable layout and conform to Ethernet engineering specifications;

3). Digital and networked audio transmission realizes, high expendable system;

4). Distributed digital audio system: a large audio system of multiple input and output devices, decentralized audio device connection,  software routing and signal distribution;

5). Using Dante Controller software can easily realize fully networked Dante device detection and audio routing configuration;

6). Power amplifier features single RJ-45, 100Mbps of Dante audio transmission rate, routing control via Dante Controller, parametric volume, mute, limit, EQ and noise gate(optional) control, over-current, high temperature, overload/short circuit protection, natural heat dissipation;

7). Digital EQ adjustment and crossover. User can easily set EQ points and crossover frequencies matching the speaker.

The parameters and data set by user can be saved to the computer, the data on the computer and the machine can be read and called from each other;

8). PoE network cabling adopts the 48V DC power supply carried by Ethernet cable, free from all restrictions of high-voltage AD cabling, better satisfying the safety and fire prevention regulations;

9). Can be widely used in banquet hall/function hall, classroom, conference room, theme park, etc.

BR-102D is a Dante interface with 12 microphone inputs . It is ideal for adding microphone inputs to Dante systems. The BR-102D can be installed near the sound source to minimize analog wiring that is prone to interference. Dante connection simplifies the system's infrastructure wiring. Each BR-102D unit can be connected to a network switch using a category 5 network cable. All adjustable parameters of BR-102D can be controlled by dante controller software. The BR-102D has 12 balanced microphones inputs. Each microphone input comes with a 48v phantom power switch that can independently switch phantom power. Each channel independently displays the channel level, and has an independent switch to adjust the input microphone volume. The front panel has indicators to show the power and network status for easy troubleshooting.

The speaker uses a patented design of a 4-inch bass + 3 0.5-inch tweeter coaxial unit. In terms of sound quality, it not only has the characteristics of high phase fidelity of the full-range speaker, but also realizes the output of a more natural sound in the form of a standard point source. At the same time, it also has the powerful expressive power of the crossover speakers in the high and low frequencies, making its sound level more distinct and the sense of detail more prominent. Three tweeters are arranged in a vertical line to form a linear array pattern, which makes the high-frequency horizontal pointing wider and can take care of more areas. The coaxial unit design can reduce the volume of the speaker as much as possible, and the appearance is more compact and elegant.

The speakers use Dante digital audio interface and POE network power supply to drive the power amplifier module. Only one network cable is needed to supply audio signals and power at the same time. In a digital audio system, our product is a terminal node that provides the terminal playback function of a digital audio system.

The speaker uses a patented design of a 4-inch bass + 3 0.5-inch tweeter coaxial unit. In terms of sound quality, it not only has the characteristics of high phase fidelity of the full-range speaker, but also realizes the output of a more natural sound in the form of a standard point source. At the same time, it also has the powerful expressive power of the crossover speakers in the high and low frequencies, making its sound level more distinct and the sense of detail more prominent. Three tweeters are arranged in a vertical line to form a linear array pattern, which makes the high-frequency horizontal pointing wider and can take care of more areas. The coaxial unit design can reduce the volume of the speaker as much as possible, and the appearance is more compact and elegant.

The speakers use Dante digital audio interface and POE network power supply to drive the power amplifier module. Only one network cable is needed to supply audio signals and power at the same time. In a digital audio system, our product is a terminal node that provides the terminal playback function of a digital audio system.

The Quicklink TX Quad will allow you to easily manage 4 simultaneous incoming Skype calls to be processed as 4 SDI or NDI outputs in one single unit. A high availability upgrade option is available on this unit.

Product Highlights

• Manage 4 incoming Skype calls to 4 SDI outputs
• 4 professional SD/HD SDI input & outputs
• Supports both I/O for NDI™
• High Availability Option including Dual Power Supply & Raided drives
• Skype TX controller software with control console
• Ultra low delay: For instantaneous 2 way video/audio contributions
• Video and audio free from adverts
• Aspect ratio correction method: Scale your SDI input picture to your requested resolution
• Customisable tally or information graphic overlay back to return caller
• Talkback: Switch between 3 different audio sources
• Screen sharing capability
• Auto-Answer function
• Embedded SDI audio (16 Channel in hardware)
• AES balanced audio (additonal hardware required)
• Remote Management Ethernet Port for bare metal restore
• HD Recording Function
• Free complimentary technical information via the Customer Portal

The Quicklink TX Duo allows you to manage two simultaneous Skype calls to be processed as 2 SDI/NDI outputs. The TX Duo enables you to access 300 million Skype users for inclusion for remote interviews within live broadcasts, TV game shows, worship events or large managed corporate events.

Product Highlights

• Manage up to 2 incoming Skype calls to 2 SDI outputs
• Two professional SD/HD SDI input/output
• Supports both I/O for NDI™
• Skype TX controller software with control console
• Ultra low delay: For instantaneous bi-directional video/audio contributions
• Video and audio free from adverts
• Aspect ratio correction method: Scale your SDI input picture to your requested resolution
• Customisable tally or information graphic overlay back to return caller
• Screen sharing capability
• Auto-Answer function
• Embedded SDI audio
• Remote Management Ethernet Port for bare metal restore
• HD Recording Function
• Free complimentary technical information via the Customer Portal

WTX-D is a network media matrix mainly used for local conferences, education and remote interactive education. It is equipped with high-performance digital audio processing technology, eight-channel audio processing, including full-band adaptive echo cancellation, automatic noise suppression, Feedback suppression algorithm, with wireless microphone pickup, compact pen-shaped microphone, automatic frequency comparison at startup, simple operation; comes with 6 + 1 network ports, supports PoE, 100 / 1000M adaptive, 100 meters transmission distance, supports IEEE802.3af / at standard, single port maximum power 60W. Easily meet the high-quality voice needs of local sound reinforcement, recording and broadcasting and remote interactive education.

BR-102D is a Dante interface with 12 microphone inputs . It is ideal for adding microphone inputs to Dante systems. The BR-102D can be installed near the sound source to minimize analog wiring that is prone to interference. Dante connection simplifies the system's infrastructure wiring. Each BR-102D unit can be connected to a network switch using a category 5 network cable. All adjustable parameters of BR-102D can be controlled by dante controller software. The BR-102D has 12 balanced microphone inputs. Each microphone input comes with a 48v phantom power switch that can independently switch phantom power. Each channel independently displays the channel level, and has an independent switch to adjust the input microphone volume. The front panel has indicators to show the power and network status for easy troubleshooting.

The PE-66 digital network flat panel speaker has a built-in PoE active audio power module. It follows the latest PoE technology standards and uses the international mainstream mainstream high-performance digital media DANTE network to achieve excellent sound, simple wiring, flexible use, simple maintenance, and easy management , Economic and energy saving features, through a network cable to achieve distributed power supply, audio signal transmission, integrated control and other functions. This product is suitable for indoor, corridor wall hanging, customized features, conference rooms with 60 * 60 ceilings and other places.

TX-D is a network media matrix mainly used for local conferences, education, and remote interactive education. It is equipped with high-performance digital audio processing technology and eight-channel audio processing, including full-band adaptive echo cancellation, automatic noise suppression, and feedback suppression algorithms. With long-distance pickup microphone, it is easy to install and easy to operate. It comes with 6 + 1 network ports, supports PoE , 100 / 1000M adaptive, 100 meters transmission distance, supports IEEE802.3af / at standard, single port maximum power 60W . Easily meet the high-demand needs of local sound reinforcement, recording and broadcasting and remote interactive education.

BOX 2 * 2 / IO is a powerful digital signal processor that does not require extensive learning. It provides 2 microphone / line inputs and 2 line outputs with phantom power. Embedded installation, with many high-quality features, no design, no learning at all. A complete audio processing solution for the optimization of specific locations and systems. Suitable for retrofitting Dante ™ audio applications and upgrading traditional audio systems.

The BR-108A network audio processor is an audio processing and control system that can be freely designed. It uses advanced DSP processing technology and has a new algorithm of automatic mixing and feedback cancellation, which can solve various practical problems in application scenarios. Since most of the controls are operated by software, the appearance is more concise and lively. The operator only needs to click the mouse lightly, instead of adjusting complex large-scale mixers on the spot to complete the function conversion as before, which greatly simplifies the operation.