Dante-enabled Product Catalog

studio-technologies-M391|studio-technologies-M391

Studio Technologies

Studio Technologies – Model 391 Dante Alerting Unit

The Model 391 Dante Alerting Unit builds on the limited capabilities of the "beacon" or a "strobe" devices that are ubiquitous with analog party-line (PL) intercom systems and adds a broad range of new and enhanced features.

The Model 391 Dante Alerting Unit builds on the limited capabilities of the "beacon" or a "strobe" devices that are ubiquitous with analog party-line (PL) intercom systems and adds a broad range of new and enhanced features. The Model 391 will respond to 20 kHz tone "call" signals that are commonly utilized in both legacy analog and modern digital party-line intercom circuits. Upon detecting a call signal the Model 391 can provide a visual indicator, enable an audible "buzzer" output, and even activate an analog line output. Each of the Model 391's alerting resources can be individually optimized to meet the unique requirements of many applications. The STcontroller personal computer application is used to select from a wide range of operating choices. The compact, portable unit is compatible with Dante audio-over-Ethernet installations and requires only an Ethernet connection with Power-over-Ethernet (PoE) capabilities for operation. Typical Model 391 applications will include use in theaters, sports facilities, corporate events, and broadcast studios. Key Features

Dante audio-over-Ethernet technology
Compatible with Studio Technologies' Dante beltpacks
Responds to standard 20 kHz call signals
Visual and audible call indications
General-purpose analog line output
Configured using STcontroller application
Power-over-Ethernet (PoE) powered

Intercoms

Dante Ch: 2 In
24-bit

See the product

studio-technologies-model-48d|studio-technologies-model-48d

Studio Technologies

Studio Technologies – Model 48D Dante Bridge

The Model 48D Dante Bridge provides a simple yet high-performance means of interconnecting, or "bridging," Dante audio signals associated with two independent local-area-networks. The Model 48D Dante Bridge provides a simple yet high-performance means of interconnecting, or "bridging," Dante audio signals associated with two independent local-area-networks. The unit allows up to four audio channels to pass in each direction. Internal circuitry provides timing and bit-depth correction to ensure that audio signal integrity is maintained.

I/O Interfaces

Dante Ch: 4x4
24-bit

See the product

Eventide

Eventide – H9000

The H9000 continues Eventide's unbroken tradition of delivering industry-leading signal processing power to the pro audio community. The H9000 continues Eventide's unbroken tradition of delivering industry-leading signal processing power to the pro audio community. The culmination of a multi-year development cycle, the H9000 features 8x the processing power of the H8000 and a huge array of I/O options, as well as network capability. The multichannel processing power of the H9000 makes it a suitable platform for surround sound and for processing several tracks of audio simultaneously. In addition, the H9000 introduces the concept of FX Chains which allows users to connect any set of four effects with flexible routing. FX Chains can be created to act as a voice channel, a guitar 'pedal board', a modular synth with effects, etc. The H9000's remote control application, emote, is available for users working 'in the box' or over an audio network. Emote is available as a stand-alone application for Mac and PC and as a plug-in for ProTools, AU and VST.

DSPs (Digital Signal Processors)

See the product

KLANGquelle19_1200px|KLANGquelle19_1200px

Klang Technologies

Klang – KLANG:quelle 19″

KLANG:quelle 19" is a Dante enabled 8 channel XLR line level breakout box with additional 4 stereo reference headphone outputs. It integrates 2 devices in 1. KLANG:quelle 19" is a Dante enabled 8 channel XLR line level breakout box with additional 4 stereo reference headphone outputs. It integrates 2 devices in 1. Through the choice of premium converters suitable for low-resistance in-ear headphones, a crystal clear sound, without distortion, is enabled. KLANG:quelle 19" take only 1 RU space and comes with an internal power supply. It provides Power over Ethernet (PoE) and hence offers power redundancy. This is exactly the right solution for your high standards, being in a demanding studio environment, at band rehearsals or in the daily stage routine. Everywhere at these places, an extremely reliable, latency free and momentum faithful analog output and headphone sound is essential. This is where KLANG:quelle 19" comes into play. All these features come in a convenient and compact case. Get to know more about the advantages of KLANG:quelle 19" and we are certain that you'll never want to work again without one.

Personal Mixing & Monitoring

Dante Ch: 8 In
24-bit

See the product

RTS

RTS – ODIN

ODIN condenses decades of experience and the latest RTS innovations into a compact single rack unit package that offers state-of-the-art IP technology along with analog connectivity. ODIN condenses decades of experience and the latest RTS innovations into a compact single rack unit package that offers state-of-the-art IP technology along with analog connectivity. Where previous-generation digital matrix products were significantly larger and more costly to own and operate, ODIN’s feature set and form factor are designed to make a professional matrix solution more accessible and easier to use than ever before, opening up the benefits of IP-based communications for wide range of new markets and users of all levels. In keeping with the RTS principles of forward thinking and backwards compatibility, ODIN can seamlessly integrate into the most sophisticated, large-scale intercom operations, extending the value of the initial investment, while also providing a path for system expansion for smaller users who want to upgrade existing RTS systems to the latest technologies. Whether the user wants to expand intercom functionality with an IP-based system at a regional theater or large house of worship, or whether the goal is to start streamlining a larger system’s footprint and cost of operation in an OB van or broadcast control room — ODIN stands apart as the most comprehensive intercom solution RTS has ever made.

Intercoms

Dante Ch: 128x128
AES67 Enabled

See the product

Arrakis Systems

Arrakis Systems – DARC Virtual Console

Audio over IP does not need to be complicated or expensive. With the DARC Virtual Console, you can control any Dante network audio source. Mix, adjust levels, everything you need for an On-Air or production room console. Audio over IP does not need to be complicated or expensive. With the DARC Virtual Console, you can control any Dante network audio source. Mix, adjust levels, everything you need for an On-Air or production room console. The DARC Virtual Console can be ran as a stand alone unit, or in conjunction with an AoIP network with multiple studios. It will control any Dante enabled audio device on your LAN, whether it is a source connected to our Simple IP units, or any Dante device such as the Dante AVIO. As a standalone unit, you don't need a large AoIP network to utilize this brilliant board. Simply connect all your audio sources into one of our Simple IP boxes (or any Dante enabled device), then connect the Dante Virtual software onto the same network. Utilizing the Dante Controller software, you choose which sources to control, and away you go. Since DARC controls any Dante audio source, you can configure DARC to control any audio source on your LAN. This allows you to make your setup as large and complex as your studios require. Which also allows you to expand your operations in the future.

Mixers

See the product

Sierra Automated Systems

Sierra Automated Systems – Nucleus

The SAS Nucleus is an Advanced AoIP, DSP engine which offers transparent 24 bit audio, utilizing Open Media Protocols such as AES, Analog and Dante I/O alongside Headphone, Monitor, Metering and Cue sections for rapid installation, flexibility and years of robust service. The SAS Nucleus is an Advanced AoIP, DSP engine which offers transparent 24 bit audio, utilizing Open Media Protocols such as AES, Analog and Dante I/O alongside Headphone, Monitor, Metering and Cue sections for rapid installation, flexibility and years of robust service. The Nucleus can be used with any SAS console or as a standalone AoIP network edge I/O device. Compact, user configurable, reliable and cost-effective. A studio is only as strong as it’s core and the Nucleus delivers!

DSPs (Digital Signal Processors)

See the product

Digigram

Digigram – LX-Dante

The PCIe LX-DANTE sound card bridges professional audio software applications to Dante networks. By supporting 128 x 128 redundant channels, and providing extremely low latency, LX-DANTE matches all the requirements for high channel density, low latency, and reliability of professional DAWs used for high quality recordings, processing, and multi-channel playout over Dante networks. The PCIe LX-DANTE sound card bridges professional audio software applications to Dante networks. By supporting 128 x 128 redundant channels, and providing extremely low latency, LX-DANTE matches all the requirements for high channel density, low latency, and reliability of professional DAWs used for high quality recordings, processing, and multi-channel playout over Dante networks.

Dante Interface Cards

See the product

digigram-AUDIOWAY-bridge-B3_1200px|digigram-AUDIOWAY-bridge-B3_1200px

Digigram

Digigram – AUDIOWAY Bridge B1

The AUDIOWAY Bridge B1 is an intelligent gateway between MADI and AES/EBU digital audio streams and AES67/Dante™ synchronous audio-over-IP streams. The AUDIOWAY Bridge B1 is an intelligent gateway between MADI and AES/EBU digital audio streams and AES67/Dante™ synchronous audio-over-IP streams. Forming the backbone of your infrastructure, the AUDIOWAY Bridge B1 is the ideal solution to distribute and interconnect your audio streams both in the studio and externally. Thanks to the software supplied with the product, the BRIDGE B1 can be used to route as well as monitor all inputs/outputs in every format (MADI – AES/EBU – AES67/Dante™). As a complete single-box system it not only bridges audio-over-IP (AoIP) streams and legacy signals, but also ensures clock synchronization between the two systems. AUDIOWAY Bridge B1 allows you to route and monitor low latency audio whatever the technology/protocol. It brings a seamless studio management with AVS-monitor, Dante™ Controller and multiple presets. It reduces the cost and complexity of AoIP integration into your studio infrastructure. The AUDIOWAY Bridge B1 features 64/64 Dante™/AES67 full-duplex I/O channels, and is equipped with both 64/64 MADI I/O and 16/16 AES/EBU I/O digital audio interfaces, as well as a low latency hardware routing matrix between all inputs and all outputs.. AUDIOWAY Bridge B1 is very simple to use thanks to its control application which provides complete configuration and monitoring of all the streams operated by the equipment.

I/O Interfaces

See the product

Digigram

Digigram – Audioway Bridge B2

The BRIDGE B2 is an intelligent gateway between MADI digital audio and AES67/Dante™ synchronous audio-over-IP streams. Forming the backbone of your infrastructure, the BRIDGE B2 is the ideal solution to distribute and interconnect your MADI and AES67/Dante mission-critical streams in the studio. The BRIDGE B2 is an intelligent gateway between MADI digital audio and AES67/Dante™ synchronous audio-over-IP streams. Forming the backbone of your infrastructure, the BRIDGE B2 is the ideal solution to distribute and interconnect your MADI and AES67/Dante mission-critical streams in the studio.

Stainless steel 1U chassis power consumption <50 W
Front panel control interface for rapid overview of current status
Dual AC/DC power supply 4 configurable GPIOs Wordclock synchronisation 24-bit audio routing: 44.1 kHz to 96 kHz
AES67/Dante interface: 64-in/64-out EtherCON connector AoIP stream redundancy Integrated 4-port switch
MADI interface: 1 x optical 64-in/64-out connector 1 x BNC 64-in/64-out connector

I/O Interfaces

See the product

Digigram

Digigram – Audioway Bridge B3

The BRIDGE B3 is an intelligent gateway between AES/EBU digital audio and AES67/Dante™ synchronous audio-over-IP streams. In your infrastructure, the BRIDGE B3 is the ideal solution to connect any digital audio equipment with your Audio-over-IP studio. The BRIDGE B3 is an intelligent gateway between AES/EBU digital audio and AES67/Dante™ synchronous audio-over-IP streams. In your infrastructure, the BRIDGE B3 is the ideal solution to connect any digital audio equipment with your Audio-over-IP studio. Thanks to its redundancy, the BRIDGE B3 can also provide secure distribution of your critical AES/EBU streams on any Dante redundant network.

Stainless steel 1U chassis power consumption <50 W
Front panel control interface for rapid overview of current status
Dual AC/DC power supply 4 configurable GPIOs Wordclock synchronisation 24-bit audio routing: 44.1 kHz to 96 kHz
AES67/Dante interface: 64-in/64-out EtherCON connector AoIP stream redundancy Integrated 4-port switch
AES/EBU interface: 16-in/16-out mono Wordclock synchronisation and SRC (sample rate conversion) on each input

I/O Interfaces

See the product

TASCAM

TASCAM – IF-DA2

The IF-DA2 is a Dante interface card for Solid State Recorders SS-R250N/SS-CDR250N. Connection with 2 inputs and 2 outputs by mounting the IF-DA2 to the SS-R250N/SS-CDR250N for a Dante system. The IF-DA2 is a Dante interface card for Solid State Recorders SS-R250N/SS-CDR250N. Connection with 2 inputs and 2 outputs by mounting the IF-DA2 to the SS-R250N/SS-CDR250N for a Dante system.

Dante Interface Cards

Dante Ch: 2x2
16-bit, 24-bit

See the product

Duran Audio

Duran Audio – Octadrive DSP-DN

The Octadrive DSP-DN has integral 32-bit audio digital processing and a bi-directional DANTE™interface. The Octadrive DSP-DN has integral 32-bit audio digital processing and a bi-directional DANTE™interface. The unit may thus act as an audio Analogue break-in function/distribution amplifier with the added advantage of highly configurable on-board signal processing, or form part of a DANTE™ based audio system, with all inputs and outputs being in the digital domain. In this case, the analogue connectivity can be used as an emergency backup signal path, in the event of failure of the digital audio sources The DSP (Digital Signal Processing) allows control of gain, EQ and delay for each input and output. Control of the DSP functions are via AXYS’s WinControl software, which uses DANTE™ control data capacity for communications.

DSPs (Digital Signal Processors)

See the product

Duran Audio

Duran Audio – IndustryAmp PB-400-DN

The PB-400-DN Industry amplifier is an ultra-reliable, high-power, 4 channel (250W per channel) audio power amplifier designed for use in critical systems. The PB-400-DN Industry amplifier is an ultra-reliable, high-power, 4 channel (250W per channel) audio power amplifier designed for use in critical systems. It is designed to drive 100 V line loudspeaker systems and is equipped with on-board DSP allowing gain, EQ, delay and other parameters to be controlled from a remote location using WinControl software, via DANTE™. The amplifiers are fully monitored, with automatic fault detection and reporting. Inputs may be either balanced analogue audio or digital audio via DANTE™. When used in conjunction with Duran Audio’s OpSTImizer® service the PB amplifiers can provide significant improvements in speech intelligibility within a tunnel.

Amplifiers

See the product

Duran Audio

Duran Audio – IndustryAmp PB-800-DN

The PB-800-DN Industry amplifier is an ultra-reliable, high-power, 8 channel (100W per channel) audio power amplifier designed for use in critical systems. The PB-800-DN Industry amplifier is an ultra-reliable, high-power, 8 channel (100W per channel) audio power amplifier designed for use in critical systems. It is designed to drive 100 V line loudspeaker systems and is equipped with on-board DSP allowing gain, EQ, delay and other parameters to be controlled from a remote location using WinControl software, via DANTE™. The amplifiers are fully monitored, with automatic fault detection and reporting. Inputs may be either balanced analogue audio or digital audio DANTE™. When used in conjunction with Duran Audio’s OpSTImizer® service the PB amplifiers can provide significant improvements in speech intelligibility within a tunnel.

Amplifiers

See the product

neutrik-DANTE_Adapter-NA2-IO-DLINE|neutrik-DANTE_Adapter-NA2-IO-DLINE

Neutrik

Neutrik – NA2-IO-DLINE

This ruggedized handy box lets you connect your legacy audio gear to the Dante™ world. It works both as a ramp-on device to convert an analog LINE signal into a Dante™ signal and as a ramp-off box to come out of the Dante™ network with an anlog signal. Both can happen siumultaneously! The NA2-IO-DLINE is an end-of-network device. It is a breakout box which allows two channels of audio to be integrated into a Dante™ network. Simultaneously, NA2-IO-DLINE converts a Dante™ stream into analog audio signals. Hence, it is possible to use this tiny box to feed analog audio signals into the Dante™ network while at the same time receiving a mix from another Dante™ source. NA2-IO-DLINE is designed for harsh stage conditions. It therefore features lockable chassis connectors for both the audio and network connections. For fixed installations, the rubber protection can be removed. With optional mounting brackets or a rack panel, the box can be mounted below tables, in floor boxes, or in equipment racks.

I/O Interfaces

Dante Ch: 2x2
16-bit, 24-bit, 32-bit

See the product

sony-DWX-Digital-Wireless-Series|sony-DWX-Digital-Wireless-Series

Sony

Sony – DWX Series

The third generation of Sony's acclaimed DWX series, this high performance digital wireless receiver is an ideal choice for live sound applications including theatre and concerts, as well as studio based TV production and EFP. The third generation of Sony's acclaimed DWX series, this high performance digital wireless receiver is an ideal choice for live sound applications including theatre and concerts, as well as studio based TV production and EFP. The two-channel 1U rack-mountable wireless receiver features Sony's advanced digital audio processing, encryption and RF transmission technologies to assure secure, stable transmission and reception of very high quality audio with low latency. The DWR-R03D is ideal for use in large-scale multi-channel productions, supporting up to 21 simultaneous channels per 8MHz TV band. Support for the Dante® audio-over-IP standard enables networked multi-channel operation. The DWR-R03D is compatible with Sony Wireless Studio control software for PC (Ver 5.0 or later) and the Wireless Studio Mobile smartphone app, allowing flexible remote operation. Remote control of up to 82 transmitters is possible using the Cross Remote™ function combined with the RMU-01 remote control unit (available separately). Components

ECM-77LM
DWT-B03R

Microphones

See the product

TASCAM

TASCAM – ML-32D

The TASCAM ML-32D is a professional Dante-focused converter made specifically to insert or extract analog audio into or out of a Dante network using external breakout devices that utilize Sub-D format connectors. The TASCAM ML-32D is a professional Dante-focused converter made specifically to insert or extract analog audio into or out of a Dante network using external breakout devices that utilize Sub-D format connectors. A poweful and flexible solution, the TASCAM ML-32D has 4 D-Sub intputs and 4 D-Sub outputs, whch can easiy be connected to any of the many devices that utilize D-Sub connectors such as microphone preamplifiers, large and small format console mixers, audio interfaces, amplifiers, and euro block connector devices. This simple, yet elegant, solution enables audio to be quickly and easily inserted into - or extracted from - the Dante audio stream.

I/O Interfaces

Dante Ch: 32x32
16-bit, 24-bit

See the product

TASCAM

TASCAM – ML-16D

The TASCAM ML-16D is a professional Dante-focused converter made specifically to insert or extract analog audio into or out of a Dante network using external breakout devices that utilize Sub-D format connectors. The TASCAM ML-16D is a professional Dante-focused converter made specifically to insert or extract analog audio into or out of a Dante network using external breakout devices that utilize Sub-D format connectors. A poweful and flexible solution, the TASCAM ML-316D has 2 D-Sub intputs and 2 D-Sub outputs, whch can easiy be connected to any of the many devices that utilize D-Sub connectors such as microphone preamplifiers, large and small format console mixers, audio interfaces, amplifiers, and euro block connector devices. This simple, yet elegant, solution enables audio to be quickly and easily inserted into - or extracted from - the Dante audio stream.

I/O Interfaces

Dante Ch: 16x16
16-bit, 24-bit

See the product

Coda Audio

Coda Audio – LINUS M-Rack

The LINUS M-RACK continues CODA Audio’s comprehensive system-based approach by providing a single LINUS14D DSP/amplifier with a CODA PAN-M connector panel in a compact 3U rack package. The LINUS M-RACK continues CODA Audio’s comprehensive system-based approach by providing a single LINUS14D DSP/amplifier with a CODA PAN-M connector panel in a compact 3U rack package. As the LINUS14D is capable of powering every loudspeaker in the CODA catalogue, the M-RACK makes every smaller portable CODA system as clean and flawless in terms of aesthetics and connectivity as it is in terms of system performance. This ready-made factory solution is fully compatible with the larger LINUS-T-Rack allowing for easy cross rental and system expansion.

One LINUS14D amplifier in a 3U case
Delivers 4x 3500W @ 4 Ohm
Requires only 16A / 230V (or 32A / 110V)
Selectable inputs: Analog, AES over Ethernet, LiNET, DANTE
Outputs on NL4, NL8
5-pol XLR comparator inputs for use with Coda Audio sensor controlled subwoofers
All connectors at the front for easy workflow
Sliding door for quick access
Protection grill on the rear for connectors protection
Can drive all CODA loudspeaker systems
Fully compatible to LINUS T-RACK

Amplifiers

See the product

Coda Audio

Coda Audio – Linus14D

The LINUS14D is a four channel DSP, Network, Comparator and Amplifier delivering 4x 3500W of clean power in a light weight 19”/2U package. The LINUS14D is a four channel DSP, Network, Comparator and Amplifier delivering 4x 3500W of clean power in a light weight 19”/2U package. The 4 audio inputs are selectable from Analog, LiNET digital audio or DANTE audio network and are routable to any of the 4 outputs via the input matrix. LINUS14D ENGINE – the class D-IC output stage topology delivers audiophile sonic accuracy with enormous headroom providing significant improvement of the system performance in dynamics and transparency. LINUS CORE – the SHARC floating point DSP processor ensures tremendous processing power enabling the integration of sophisticated audio algorithms. The advanced signal processing includes IIR and phase linear FIR filters for perfect linearity and superior sound performance as well as advanced look-ahead and frequency dependent limiters for increased system headroom and sonic fidelity under heavy use conditions. LiNET – is a robust, redundant audio transport solution that transmits digital audio over a standard CAT5 cable. Up to 8 digital audio signals can be sent to each amplifier via LiNET, buffered and sent to the next unit via the LiNET link out for daisy chaining. The signal routing inside the LINUS14D can be done remotely or using the pushbuttons on the front panel. DANTE – transmit digital audio over an Ethernet based network. COMPARATOR – the LINUS14D provides integrated feedback loop control for sensor controlled subwoofers. The unit has four sensor inputs connected to two 5-pol Neutrik XLR input. The comparator’s electronic circuit loop measures the voice coil movement and adjusts the amplifier driving voltage and/or current to correct any driver inaccuracy. It is a closed feedback-loop and therefore self-optimizing system in which the driver confirms precisely the power it needs to produce exactly the original audio signal. The key advantage is a very extended and controlled response. Any distortion produced by the driver or the enclosure is instantly corrected by the feedback. AUX – integrated evacuation massage contact in accordance with DIN EN 60849. LINUS LIVE – Ethernet based graphical user interface for fast and flexible system configuration, tuning and control. APPLICATIONS Containing factory presets for all CODA Audio loudspeaker systems LINUS14D offers a flexible solution for touring, permanent installation, corporate AV and portable applications.

Amplifiers

See the product

Powersoft

Powersoft – Duecanali 1604 DSP+D

The Duecanali 1604 is designed to work with lo-Z (from 2 Ω ) and with 70V/100V distributed lines: any mixed impedance output loads can be realized. Providing access to all functions yet easily set up, the Duecanali Series is versatile in use. Powersoft's legendary efficency saves valuable energy, keeping both operational cost and ‘carbon footprint’ at a minimum. The Duecanali 1604 is designed to work with lo-Z (from 2 Ω ) and with 70V/100V distributed lines: any mixed impedance output loads can be realized. A fully integrated state-of-the-art DSP yields extensive system management functionality. In addition to sound shaping and limiter functions in unique Powersoft style, the DSP hardware and Armonía Pro Audio Suite™ software enable compliance with IEC 60849 for the crucial requirements of sound systems for emergency purposes.

Amplifiers

Dante Ch: 2 In
24-bit

See the product

Bosch

Bosch – DICENTIS Interpreter desk

Speaking the language of the interpreter is what the DICENTIS Interpreter desk is designed to do. By observing and interviewing expert interpreters and technicians worldwide, the desk has been optimized for the real-life needs of interpreters. Speaking the language of the interpreter is what the DICENTIS Interpreter desk is designed to do. By observing and interviewing expert interpreters and technicians worldwide, the desk has been optimized for the real-life needs of interpreters. The DICENTIS Interpreter desk is part of the DICENTIS Conference System, which supports up to 100 interpreted languages. The conference system uses internationally recognized encryption standards for all audio and data. It offers the best protection against eavesdropping, unauthorized access and data tampering. High-quality, real-time audio and control is ensured by OMNEO* IP technology, which also allows for easy system integration with third-party solutions. OMNEO also enables the use of existing network infrastructure. The DICENTIS Interpreter desk is fully compatible with the DICENTIS platform and complies with the simultaneous interpreting equipment standard ISO 20109. It enables the creation of passive overflow rooms adjacent to the main meeting room in case there are more participants than can be accommodated at the main meeting location. Using the DICENTIS Meeting application, all languages and interpreter desks can be remotely configured and managed.

Conference Systems

See the product

Bosch

Bosch – PRAESENSA

The new Bosch Public Address and Voice Alarm System goes IP – PRAESENSA sets new industry benchmark. The new Bosch Public Address and Voice Alarm System goes IP – PRAESENSA sets new industry benchmark. All components of the system are networked, thereby ensuring the highest flexibility and scalability from small centralized to large decentralized systems. The Bosch OMNEO* IP architecture supports DanteTM audio networking, AES67 and AES70 protocol. The innovative multi-channel amplifier architecture with intelligent power allocation across the amplifier outputs and integrated spare channel significantly improves the effective utilization of available power, regardless of the loudspeaker load in each zone. As a result, fewer amplifiers are needed, saving up to 50 percent on space, energy and backup battery power and leading to a very competitive cost of ownership. PRAESENSA offers special features for highest level of data security and full network link redundancy with smart integration of functions and backup facilities. No single point of failure is core to the system concept and only a few different devices are needed to fulfill all system and user needs.

Conference Systems

See the product

Sennheiser

Sennheiser – SL DI 4 XLR

This product has reached "end of life" and is discontinued by the manufacturer The SL DI 4 XLR four input Dante preamp is the ideal interface for wireless microphone receivers, and adding mic/line inputs to a Dante system. The small form factor to the SL DI 4 XLR allows them to be mounted almost anywhere, putting them close to audio sources and minimizing interference-prone analog wiring. The SL DI 4 XLR features four balanced mic/line inputs, each with software selectable +48V phantom power and 8 gain levels. Front panel indicators show each channel’s gain and phantom power status for easy troubleshooting. The SL DI 4 XLR has two network connections to allow Dante Daisy Chaining. Dante Daisy Chaining further simplifies system infrastructure wiring by allowing multiple SL DI 4 XLRs to use a single CAT 5 home run connection to a network switch. Power can also be daisy chained. The SL DI 4 XLR is powered by either external +12VDC or any PoE network switch. All adjustable parameters, like mic/ line gain and phantom power, are software controlled.

Microphone Preamps

Dante Ch: 4 In
24-bit

See the product

Monacor

Monacor – AKB-30DT/DSP

Monacor's AKB-30DT/DSP is a Class D mono mixing amplifier with integrated Dante® module and DSP technology. Monacor's AKB-30DT/DSP is a Class D mono mixing amplifier with integrated Dante® module and DSP technology.

2 x mono 15 W/4-8 Ω
Silent operation due to fanless cooling concept
DSP can be controlled via MONACOR DSP software or via app
Dante® input and feed-through output
Speaker outputs via plug-in screw terminals
Metal housing with mounting brackets
Power is provided via PoE (Power over Ethernet) or optional 12 V power supply

Amplifiers

See the product

Dynacord

Dynacord – IPX20:4

Dynacord's IPX20:4 is a 4 x 5000 W multi-channel installation DSP amplifier. Dynacord's IPX20:4 is a 4 x 5000 W multi-channel installation DSP amplifier.

4 x 5000 W multi-channel installation DSP amplifier with digitally controlled PFC supply
Fully integrated DSP with high-resolution 96 kHz processing and FIR Drive
Dante and OCA integration via OMNEO with fallback options
Parallel drive mode with 70/100V and low impedance operation
High efficiency Eco Rail technology for lower operating costs

Amplifiers

Dante Ch: 8x2
48kHz-96kHz

See the product

Dante-enabled Product Catalog

Categories

Manufacturer

Features

Specifications

Studio Technologies – Model 391 Dante Alerting Unit

Studio Technologies – Model 48D Dante Bridge

Eventide – H9000

Klang – KLANG:quelle 19″

RTS – ODIN

Arrakis Systems – DARC Virtual Console

Sierra Automated Systems – Nucleus

Digigram – LX-Dante

Digigram – AUDIOWAY Bridge B1

Digigram – Audioway Bridge B2

Digigram – Audioway Bridge B3

TASCAM – IF-DA2

Duran Audio – Octadrive DSP-DN

Duran Audio – IndustryAmp PB-400-DN

Duran Audio – IndustryAmp PB-800-DN

Neutrik – NA2-IO-DLINE

Sony – DWX Series

TASCAM – ML-32D

TASCAM – ML-16D

Coda Audio – LINUS M-Rack

Coda Audio – Linus14D

Powersoft – Duecanali 1604 DSP+D

Bosch – DICENTIS Interpreter desk

Bosch – PRAESENSA

Sennheiser – SL DI 4 XLR

Monacor – AKB-30DT/DSP

Dynacord – IPX20:4

Stay connected to Dante

Support

Company

Dante Networking Alliance

Dante-enabled Product Catalog

Activating Third Party Apps