Cart
← Back to Product Catalog

DSPPA – D2125

Amplifiers

More details

Similar Products
  • LEA Professional

CS1504D

Introducing the CONNECT 1504D high-power IoT-enabled smart amps. This four-channel model drives 1,500 watts per channel (into 2, 4, and 8 ohms as well as 70Vrms and 100Vrms). This addition to the CONNECTSERIES amplifiers is available in NETWORK CONNECT and DANTE CONNECT versions, including both Dante and AES 67 connectivity options. With three different methods of network connection, users can connect using the amplifier’s built-in Wi-Fi Access Point, connecting to an existing Wi-Fi network, or using a Local Area Network Ethernet connection. Then there’s the Cloud…The CONNECTSERIES is the first professional amplifier family to feature Cloud connectivity. Harness the power of the Cloud for remote control, monitoring, notifications and more from any of your personal devices. Just connect your amp to a network and start commanding your systems.
    Amplifiers
  • Dante Ch: 8x8
  • 24-bit
See the product
nXe-3.02_600px
  • Ashly Audio

Ashly – nXe3.02bd

The nXe3.02bd is a 2 channel multi-mode amplifier capable of driving 2 Ohm loads at full power. The maximum rated output power is 3,000W per channel at Low Z, 2,450W per channel in 70V mode, and 1,250W in 100V mode. There is an automatic but defeatable sleep mode consuming <1W, and instant standby mode controlled by contact closure or software. A switch mode power supply auto-detects 120VAC or 240VAC mains, and a Neutrik® powerCON is used for the AC cord. Each channel has selectable output mode of Low Z, 70V, or 100V, an 80Hz high-pass filter, input limiter, and input gain settings of 26dB, 32dB, 38dB, or 1.4V. Each channel has remote DC level control. Input connectors are Neutrik® XLR/TRS combo jack and Euroblock, while output connectors are Neutrik® speakON. The unit has a front panel power switch and level controls that can be disabled. LEDs indicate Protect, Sleep, Disabled, Com, and Bridge mode status, as well as Temperature, Output Current, Output Signal, and Clipping/Mute status per channel. The unit has Ethernet control with a real-time clock for event scheduling. The unit has serial data remote control, aux preamp outputs, preset control, fault condition logic outputs, optional network audio and AES3 digital audio capability. The amplifier has temperature dependent variable speed forced-air cooling.
    Amplifiers
See the product
el-ipd-amp-ext
  • ELAN

ELAN – EL-IPD-AMP-EXT

The new ELAN® Digital IP-Enabled Multi-Room Audio System featuring Dante® audio networking is the next generation of Multi-Zone Audio. This new intelligent audio system delivers exceptional quality with the flexibility to scale from a single chassis to multiple chassis and up to 64 zones. The comprehensive line includes a Multi-Zone Audio Matrix, Multi-Zone Audio Extender, Multi-Zone Pre-Amp Audio Matrix, Local Audio Source Preamp and a Network Audio Card.

EL-IPD-AMP-EXT is a Multi Zone Audio Extender

    Amplifiers
See the product