The fastest, smartest console ever created, Quantum 7 delivers the functionality, audio performance and sheer scale required to deliver the largest productions now and in the future. With Quantum 7, you have the power to tackle any challenge and truly own the room.
Built to exceed the ambitions of tomorrow’s touring productions, Quantum 7 breaks the barrier of seventh generation FPGA technology to deliver a dramatic leap forward in power and connectivity. All of this can be added to your existing SD7 surface, ensuring rental partners benefit from an even longer return on investment.
The result is a revolution of possibilities that towers above every other mixing platform available today.
Where once it was impossible to efficiently build an engine with more than one FPGA, now Quantum 7 brings you the extraordinary might of three large-scale FPGAs working in unison.
Inside the Quantum engine, up to 2,000 channels can be transported across 688 processing paths at 96kHz. New GTX ports run at 6.6GHz while simple two wire connections ensure the fastest possible data speeds to reach a new pinnacle in mixing capability. Fully scalable and designed to communicate seamlessly with the next generation of FPGAs, the Quantum engine is a uniquely formidable platform for an ambitious industry.
VIO L212 is the first dBTechnologies’ full scale line array module designed for large touring sound reinforcement applications, concurrently providing mighty output capability and optimized coverage behaviour. dBTechnologies was able to pack great sound pressure levels into one of the most compact and lightest active 2x12” line array systems.
With VIO L212, dBTechnologies makes the most of its approach to sound reinforcement solutions. An advanced DSP provides highly accurate intelligibility, sound definition and stunning headroom, while integrated mechanics and accessories provides smart solutions to ease set-up, transport and storage of the systems.
VIO L212 is the full scale 3-way line array system designed for larger touring applications, concurrently providing mighty output capability, optimized coverage behaviour and a stunning headroom, alongside with rapid and easily configurable rigging solutions. All the fundamental features of an outstanding PA packed into one of the most compact and lightest active 2x12” systems.
The perfect partner for VIO L212 in larger sound reinforcement applications. A simple, effective dual sub configuration designed to enhance the reproduction of the lowest frequencies, boosted by an advanced DSP control and complete network capability.
Featuring a dual 18" subwoofer pairing in a voluminous bass-reflex housing, VIO S218 encompasses a vigorous audio performance and a ultra low frequency punch, extending down to 28 Hz: the perfect bottom-end addition to large VIO L212 sound reinforcement systems.
As a default, VIO S218 is equipped with dBTechnologies RD-Net card, for real time remote control via Aurora Net software. Furthermore, the preamplifier is ready for future upgrades with Audinate DanteTM AoIP protocol. To help users in this configuration, S218 comes with built-in technologies: Near Field Communication (NFC™) proximity sensors are used to determine the position of each box within an array. This technology, together with a hi-brightness LED bulb on the front of the enclosure, contributes to help the user to recognize, identify and match each box physical position on the remote control software Aurora Net. The amp also allows users to run auto-test on electronics and transducers before and after use and a real time impedance control. This unique system ensure tour-grade reliability and remote control over your entire PA’s health.
A flyable active subwoofer, equipped with a 18” neodymium woofer and crafted to complete with impressive low-end frequencies and vigorous SPL VIO L210’s accurate, phase coherent wave front.
dBTechnologies developed a horn loaded design, while maintaining the size of a front-loaded sub cabinet, resulting in a double advantage: smaller dimension (and weight – only 45,1 kg) and a remarkable lower frequencies response even at a long distance.
This makes this sub the perfect low-end extension of VIO arrays whenever a particularly long-throw is needed.
Upgrading arrayable loudspeaker concept to a brand-new level, dBTechnologies proudly presents VIO C, a complete series of 2-way active line-source speakers for the widest range of venues and applications, from installed PA systems to sound reinforcement for touring.
Designed to create horizontal or vertical line-source arrays and featuring a simple yet rapid rigging system, VIO C offers the most flexible coverage options as well as the powerful and pure acoustic performance that distinguishes all VIO cabinets. The series encompasses 3 enclosures housing premium neodymium components: VIO C12 (1x12”, 3.5” v.c. LF and 1x1.4”exit, 3” v.c. HF), VIO C15 (1x15”, 3.5” v.c. LF and 1x1.4” exit, 3” v.c. HF) and VIO C212 (2x12”, 3” v.c. LF and 1x 1.4”exit, 3” v.c. HF ). The whole series is equipped with latest generation 1600 W RMS Class D Amp module Digipro G4 driving a powerful DSP and allowing each system to deliver impressive SPL (139 dB for VIO C12, 140 dB for VIO C15, and 141 dB for VIO C212).
Upgrading arrayable loudspeaker concept to a brand-new level, dBTechnologies proudly presents VIO C, a complete series of 2-way active line-source speakers for the widest range of venues and applications, from installed PA systems to sound reinforcement for touring.
Designed to create horizontal or vertical line-source arrays and featuring a simple yet rapid rigging system, VIO C offers the most flexible coverage options as well as the powerful and pure acoustic performance that distinguishes all VIO cabinets. The series encompasses 3 enclosures housing premium neodymium components: VIO C12 (1x12”, 3.5” v.c. LF and 1x1.4”exit, 3” v.c. HF), VIO C15 (1x15”, 3.5” v.c. LF and 1x1.4” exit, 3” v.c. HF) and VIO C212 (2x12”, 3” v.c. LF and 1x 1.4”exit, 3” v.c. HF ). The whole series is equipped with latest generation 1600 W RMS Class D Amp module Digipro G4 driving a powerful DSP and allowing each system to deliver impressive SPL (139 dB for VIO C12, 140 dB for VIO C15, and 141 dB for VIO C212).
Upgrading arrayable loudspeaker concept to a brand-new level, dBTechnologies proudly presents VIO C, a complete series of 2-way active line-source speakers for the widest range of venues and applications, from installed PA systems to sound reinforcement for touring.
Designed to create horizontal or vertical line-source arrays and featuring a simple yet rapid rigging system, VIO C offers the most flexible coverage options as well as the powerful and pure acoustic performance that distinguishes all VIO cabinets. The series encompasses 3 enclosures housing premium neodymium components: VIO C12 (1x12”, 3.5” v.c. LF and 1x1.4”exit, 3” v.c. HF), VIO C15 (1x15”, 3.5” v.c. LF and 1x1.4” exit, 3” v.c. HF) and VIO C212 (2x12”, 3” v.c. LF and 1x 1.4”exit, 3” v.c. HF ). The whole series is equipped with latest generation 1600 W RMS Class D Amp module Digipro G4 driving a powerful DSP and allowing each system to deliver impressive SPL (139 dB for VIO C12, 140 dB for VIO C15, and 141 dB for VIO C212).
TesiraCONNECT™ TC-5D serves as the central connection point for all Biamp® and Dante™ devices in a conference room. It simplifies installations by providing power and media over a single category cable between devices such as Tesira AVB DSPs, USB extenders, PoE+ amplifiers and microphones as well as 3rd party Dante devices. Four of the five Gigabit RJ-45 ports provide PoE+ power (IEEE 802.3at Class 4, 30W) to connected endpoints, while the remaining RJ-45 port is used for DSP connection or daisychaining TesiraCONNECT devices together. TC-5D eliminates the need for third-party switches; it works out-of-the box with Tesira and Dante products and does not require any device configuration. The small form factor allows it to be easily mounted to a wall or under a table, or placed above the ceiling or inside a credenza in the conference room.
Features:
Five 1 Gbps RJ-45 ports
Four ports support PoE+ power (IEEE 802.3at Class 4, 30W)
Up to 4 TesiraCONNECT devices can be daisychained together
Supports upto 32x32 channels of Dante audio
Auto-detects media network on each port
Front panel LEDs indicate port connections, device status, and fault conditions
Supports Dante Domain Manager
Dante routing configured in Dante Controller
Out-of-the-box compatibility with Biamp AVB products and Dante products
Fault reporting and device monitoring supported in SageVue
Bei Klangwert bekommen nur die innovativsten Produkte die Bezeichnung i. Das i steht für die Entwicklung und Nutzung von innovativen Ideen, aus denen intelligente, individuelle und intuitive Klangwert Produkte entstehen. High-End Produkte, die ein Zeichen setzen und inspirieren - Produkte vor allem für Ihre Anwendung.
Das Optimum der Wiedergabequalität
Inspirativ
Aus der Klangwert Controller Bibliothek können über 100 als Preset voreingestellte Lautsprecher Konfigurationen geladen werden, die im DSP der i 1200 D abrufbar sind. Dadurch wird das Optimum der Wiedergabequalität und bester Systemschutz erreicht.
Intuitiv
Über die „easy-to-use“ PANC-Software lässt sich die i 1200 D leicht in einem IP-Netzwerk integrieren. Sämtliche anwendungsbezogene Konfigurationen können intuitiv in den internen Presets gespeichert und via UDP command abgerufen werden.
ALCs provide all of the signal routing, zone switching, DSP processing, protective limiting, remote monitoring, and amplification functions needed between a mixer and the loudspeakers in virtually any Community Professional Loudspeakers application. Standard Ethernet communication protocols allow for fast system design, system control, and remote system monitoring. Analog and Dante® inputs are included in each model, for quick and easy integration into any new or existing system. Community-authored loudspeaker presets include equalization, high pass filters, and multi-stage limiters tailored to each model, ensuring consistent sound quality and full loudspeaker protection in every application.
In-depth control and monitoring is accomplished via ArmonìaPlus System Manager Software. Tailoring the sound and managing the system can be done at a remote, decentralized location. The ALC-404D can also be trusted in mission critical applications, such as fire alarm systems, thanks to the cleverly engineered power supply that allows reliable operation even when connected to a UPS in addition to the per-channel, user-assignable fault-indicating GPIO connectors on the rear panel.
ALCs provide all of the signal routing, zone switching, DSP processing, protective limiting, remote monitoring, and amplification functions needed between a mixer and the loudspeakers in virtually any Community Professional Loudspeakers application. Standard Ethernet communication protocols allow for fast system design, system control, and remote system monitoring. Analog and Dante® inputs are included in each model, for quick and easy integration into any new or existing system. Community-authored loudspeaker presets include equalization, high pass filters, and multi-stage limiters tailored to each model, ensuring consistent sound quality and full loudspeaker protection in every application.
In-depth control and monitoring is accomplished via ArmonìaPlus System Manager Software. Tailoring the sound and managing the system can be done at a remote, decentralized location. The ALC-1604D can also be trusted in mission critical applications, such as fire alarm systems, thanks to the cleverly engineered power supply that allows reliable operation even when connected to a UPS in addition to the per-channel, user-assignable fault-indicating GPIO connectors on the rear panel.
ALCs provide all of the signal routing, zone switching, DSP processing, protective limiting, remote monitoring, and amplification functions needed between a mixer and the loudspeakers in virtually any Community Professional Loudspeakers application. Standard Ethernet communication protocols allow for fast system design, system control, and remote system monitoring. Analog and Dante® inputs are included in each model, for quick and easy integration into any new or existing system. Community-authored loudspeaker presets include equalization, high pass filters, and multi-stage limiters tailored to each model, ensuring consistent sound quality and full loudspeaker protection in every application.
In-depth control and monitoring is accomplished via ArmonìaPlus System Manager Software. Tailoring the sound and managing the system can be done at a remote, decentralized location. The ALC-3202D can also be trusted in mission critical applications, such as fire alarm systems, thanks to the cleverly engineered power supply that allows reliable operation even when connected to a UPS in addition to the per-channel, user-assignable fault-indicating GPIO connectors on the rear panel.
LD Systems presents the ZONE X1208 19-inch DSP matrix processor with a wide range of remote control options. Thanks to its hybrid architecture DSP with 40-bit floating point DSP engine the ZONE X1208 allows professional users to load DSP templates to adapt to different installation requirements. In combination with the built-in Event Scheduler, users can create calendar-specific workflow controls and perform automated preset changes. Furthermore it features a REMOTE bus for integration with future LD Systems control panels and Paging microphones. For superior signal flexibility the ZONE X1208 provides 12 balanced mic/line inputs with premium grade microphone preamps and 48 V phantom power selection per input, 8 balanced line outputs, 8 GPI, and 8 GPO logic ports.
At only 1 RU the ZONE X1208 features a clean and intuitive front panel design and is based on the latest generation Linux operating system, enabling remote control via the Xilica Designer universal control software using the integrated Ethernet interface. In addition, dedicated remote control apps for iOS and Android are available to customize the ZONE X1208 user interface to meet individual project needs.
There is an Ethernet + Dante card optionally available for subsequent upgrading of the ZONE X1208 into a Dante-enabled Matrix system.
LD Systems presents the ZONE X1208D 19-inch DSP matrix processor with a wide range of remote control options. Thanks to its hybrid architecture DSP with 40-bit floating point DSP engine the ZONE X1208D allows professional users to load DSP templates to adapt to different installation requirements. In combination with the built-in Event Scheduler, users can create calendar-specific workflow controls and perform automated preset changes. Furthermore it features a REMOTE bus for integration with future LD Systems control panels and Paging microphones. For superior signal flexibility the ZONE X1208D provides 12 balanced mic/line inputs with premium grade microphone preamps and 48 V phantom power selection per input, 8 balanced line outputs, 8 GPI, and 8 GPO logic ports.
At only 1 RU the ZONE X1208D features a clean and intuitive front panel design and is based on the latest generation Linux operating system, enabling remote control via the Xilica Designer universal control software using the integrated Ethernet interface. In addition, dedicated remote control apps for iOS and Android are available to customize the ZONE X1208D user interface to meet individual project needs. The Matrix processor is equipped with integrated Ethernet + Dante card for advanced AoIP applications with 64×64 Dante Audio over IP channels. The Ethernet + Dante card is also optionally available for subsequent upgrading of the ZONE X1208.
RAM Audio® introduces this new generation of professional touring amplifiers based on the field proven QuantaPulse™ Technology: V Series / W Series (with only aesthetic differences).
These new devices feature two or four channel models, ready for rough handling in the touring world. For this purpose, V/W Series amps implement oversized high efficiency regulated power supply with PFC front end to deliver their full performances independently of mains status.
This together with oversized high efficiency audio power stage, forced front to back cooling through a component-free path with removable front panel dust filters, improved rugged mechanical design with even weight distribution, full digital control from LCD display on the front panel… Resulting in: just power, reliability and robustness for your touring gigs!
RAM Audio® introduces this new generation of professional touring amplifiers based on the field proven QuantaPulse™ Technology: V Series / W Series (with only aesthetic differences).
These new devices feature two or four channel models, ready for rough handling in the touring world. For this purpose, V/W Series amps implement oversized high efficiency regulated power supply with PFC front end to deliver their full performances independently of mains status.
This together with oversized high efficiency audio power stage, forced front to back cooling through a component-free path with removable front panel dust filters, improved rugged mechanical design with even weight distribution, full digital control from LCD display on the front panel… Resulting in: just power, reliability and robustness for your touring gigs!
Cloud offers five models in their CA Series - CA2250, CA2500, CA4250, CA6160, CA8125
The New CA Series of Digital Class-D Multi-Channel Amplifiers from Cloud Electronics, provides a range of simple and robust functions for commercial audio installers and users alike. Following Clouds industry renowned build and performance standards the new CA-Series Multi-Channel Amplifiers are designed specifically for commercial use in Retail, Leisure, Hospitality, Commercial and Industrial applications.
Features:
• Digital Class-D Multi-Channel Amplifier Series
• Energy Efficient Switch Mode Power Supply
• Dedicated Amp Modules per Channel
• 4Ω/8Ω or 70/100v Outputs per/Channel
• Power Sharing Capability
• Rear Dip-Switch Configuration of routing, high-pass filters, and 4Ω/8Ω/70/100v line level
The Glensound AoIP4O is packaged in a small &
rugged format and designed for outside broadcast, theatre and location
applications.
Both the AoIP4O and AoIP4I units are designed to easily and quickly interface existing analogue equipment to a Dante® / AES67 network audio system. Being powered by PoE means that only one cable needs to be connected to the network to carry both audio and power, providing flexibility and saving time on installation.
AoIP4O provides 4 balanced analogue audio Outputs from a Dante®/AES67 audio network.
Robust proven construction techniques, simple reliable interface and excellent specification will help make your technician’s life hassle free, whilst the low cost and long asset life will keep the accountant satisfied.
The Glensound AoIP4I is packaged in a small &
rugged format and designed for outside broadcast, theatre and location
applications.
Both the AoIP4O and AoIP4I units are designed to easily and quickly interface existing analogue equipment to a Dante® / AES67 network audio system. Being powered by PoE means that only one cable needs to be connected to the network to carry both audio and power, providing flexibility and saving time on installation.
AoIP4I provides 4 balanced analogue audio inputs to a Dante®/AES67 audio network.
Robust proven construction techniques, simple reliable interface and excellent specification will help make your technician’s life hassle free, whilst the low cost and long asset life will keep the accountant satisfied.
The Glensound BEATRICE D16 is a versatile and fully
featured 16 channel desktop intercom with crystal clear audio designed
for broadcast, theatre and professional audio applications.
It is part of our Beatrice intercom system that utilises the reliable
and proven Dante® network audio transmission protocol to allow real
time distribution of uncompressed audio across standard networks. It is
also AES67 compliant. As such the BEATRICE D16 is fully compatible with
other manufacturers’ equipment using the Dante® and/ or AES67
protocols.
This sixteen channel desktop intercom was designed to be very easy to
use for the operator and simple to set up for the technician. It
includes all the basic functionality required for small intercom systems
and none of the overly complex installation requirements normally
associated with large systems.
The Glensound BEATRICE R16 is a versatile and fully
featured 16 channel rackmount intercom with crystal clear audio designed
for broadcast, theatre and professional audio applications.
It is part of our Beatrice intercom system that utilises the reliable
and proven Dante network audio transmission protocol to allow real time
distribution of uncompressed audio across standard networks. It is
also AES67 compliant. As such the BEATRICE R16 is fully compatible with
other manufacturers’ equipment using the Dante and/ or AES67 protocols.
This 1RU rackmount intercom was designed to be very easy to use for
the operator and simple to set up for the technician. It includes all
the basic functionality required for small intercom systems and none of
the overly complex installation requirements normally associated with
large systems.
The Cloud CV Series includes 3 models - CV2500, CV4250, and CV8125
Cloud CV digital amplifiers are versatile multi-channel power amplifiers of advanced design, able to drive 100 V/70 V line loudspeaker systems directly. They are ideal for sound reinforcement applications in the retail, leisure, hospitality, commercial or industrial sectors. Large installations using multiple amplifiers will benefit from the amplifiers’ network connectivity: each amplifier may be configured individually, controlled and monitored remotely over a standard Ethernet network.
All models include on-board, user-configurable DSP permitting great flexibility of internal architecture, and a wide variety of remote control options including Ethernet, RS-232 and DC: the latter providing compatibility with standard Cloud remote control plates. An important aspect of the design is that “out of the box”, the amplifiers emulate earlier Cloud amplifier designs. It is not necessary to either connect a computer nor remove the lid to access internal jumpers to set primary configuration parameters such as input routing, which may be done using rear panel DIP switches. Where more advanced configuration options are needed, they can be easily accessed through the internal web server and an Ethernet connection to an external device.
The A168D Stage is a portable 16 input 8 output I/O Expander, again using the Dante network protocol to provide additional I/O anywhere on a network. It comes with 16 mic preamps on XLR inputs with Phantom Power status LEDs and 8 XLR line outputs with direct preamp control from the 4REA4 controller software. It runs at 48k and 96k and is AES67 compatible. Primary and secondary ports again come with locking EtherCON connectors and can run in redundant or switched mode.
The A164D Wall LCD is a 16 input 4 output I/O Expander that uses the Dante network protocol to provide fixed, additional I/O anywhere on a network and is designed for wall or floor mounting. It comes with 16 Mic Preamps on XLR inputs with Phantom Power status LEDs and four XLR Line Outs with direct preamp control from the 4REA4 controller software. It can run at both 48K and 96k sample rates and it is AES67 compatible. Primary and secondary Dante ports come with locking EtherCON connectors and can run in both redundant and switched mode. All LCD labels are dimmable and can be customised using Dante controller software.
The Millennia HV-316 is a cutting-edge 16-channel remote-control Ethernet mic preamp designed for adverse environments and mission-critical applications such as live touring rigs, scoring stages, remote recording trucks, sample houses, hot-rack installs, schools, churches, networked music venues, location recording, outdoor facilities, and multi-room studio complexes. The HV-316’s road-ready, lightweight military-spec aluminum 1U chassis houses 16 channels of legendary Millennia HV-3 mic preamps with simultaneous analog and Dante 32-bit/192kHz Ethernet outputs.
Designed for adverse environments and mission-critical applications
Extensive RF shielding is provided on audio and digital feeds to eliminate the possibility of cellular interference. Designed to withstand continuous operating temperatures up to 150° F, the HV-316 can be powered by both 12VDC and worldwide 90–240V AC with fail-safe operation. The HV-316’s medical-grade, redundant power supply is rated for 650,000 hours MTBF operation. If one power supply fails, the other supply continues operating without audio glitches.
Acclaimed Millennia remote preamps
Millennia remote preamps can seamlessly operate on a single Ethernet network — up to 384 redundant audio channels — letting you remotely control Gain, Polarity, Pad, Mute, channel Linking, HPF, and selectable ribbon or phantom paths on every channel. You also have unlimited scene recall scripting and virtual scribble-strips.
Next-gen 192kHz A/D conversion
The HV-316 uses 16 channels of meticulously integrated, next-generation AKM 192kHz A/D converters, multi-paralleled for extreme dynamic range performance and acclaimed Millennia sonics. All internal processing is achieved via a generic plug-and-play Linux Beagle processor to ensure non-obsolescence and easy field replacement. To say that engineers at Sweetwater are impressed with the Millennia HV-316 would be an understatement. With its bulletproof build, audiophile sonics, and innovative remote control capabilities, it’s a stunning technological achievement.
Millennia HV-316 16-channel Remote Control Ethernet Mic Preamp Features:
16 Millennia HV-3 remote mic preamps
Up to 384 redundant audio channels on a single Ethernet network
Next-gen AKM 192kHz A/D converters with 32dBu of input headroom
Designed for 65° C (150° F) continuous operating temperature
Powered by both 12VDC and worldwide 90–240VAC. Fail-safe operation
Extensive RF shielding provided on audio and digital feeds to eliminate cellular interference
Medical-grade, redundant power supply rated for 650,000 hours MTBF operation
Third party applications that use Dante Ready™ allow customers to purchase and activate Dante audio channels after installation using the Dante Activator tool in Dante Controller 4.5 or higher. Dante Activator is tied to an active Audinate user account and accepts standard credit card payments.
