Dante-enabled Product Catalog

The network audio power amplifier integrates a two-way digital power amplifier module. Signal processing and power amplification are solved on one motherboard, which shortens the signal path and simplifies engineering wiring.

Built-in 2x900W / 8Ω (1200W / 4Ω) digital power amplifier
Professional PC-side control software is easy to use, and Ethernet TCP / IP online management can manage each device in the system at the same time.
★ DANTE network audio technology, low latency without interference, without loss of smooth and full sound quality.
Network dual backup, multiple devices can be connected hand in hand.
★ Automatic or manual network IP configuration, can be named independently for easy identification in the network
Automatic protection memory function in case of power failure

    The network audio power amplifier integrates a two-way digital power amplifier module. Signal processing and power amplification are solved on one motherboard, which shortens the signal path and simplifies engineering wiring.

• Built-in 2x600W / 8Ω (800W / 4Ω) digital power amplifier
• Professional PC-side control software is easy to use, Ethernet TCP / IP online management, can manage every device in the system at the same time
• ★ DANTE network audio technology, low latency without interference, without loss of smooth and full sound quality
• Network dual backup, multiple devices can be connected hand in hand
• ★ Automatic or manual network IP configuration, can be named independently for easy identification in the network
• Automatic protection memory function in case of power failure

The network audio power amplifier integrates a four-way digital power amplifier module. Signal processing and power amplification are solved on one motherboard, which shortens the signal path and simplifies engineering wiring.

• Built-in 4 x 600W / 8 Ω ( 800W / 4 Ω) digital power amplifier
• Professional PC- side control software is easy to use, Ethernet TCP / IP online management, can manage every device in the system at the same time
• ★ DANTE network audio technology, low latency without interference, without loss of smooth and full sound quality
• Network dual backup, multiple devices can be connected hand in hand.
• ★ Automatic or manual network IP configuration, can be named independently for easy identification in the network
• Automatic protection memory function in case of power failure

DAM-808 is a digital automatic mixer based on digital signal processing technology with 8 MIC / LINE inputs and 4 outputs. Can work in automatic mixing mode or ordinary manual mixing mode. It adopts all-digital method to realize automatic mixing, and uses digital signal processing technology to adjust and compensate the audio signal. At the same time, because the device has a built-in microprocessor and has an RS232 control interface, it is very convenient to connect with various central control devices. AM816 automatic mixer has high intelligence, strong signal processing function, friendly control interface, very simple to use, and can be used in teaching, conferences, churches, entertainment programs and other occasions.

• 24bitA / D, D / A converter, 44.1kHz sampling frequency
• 8 balanced inputs, switchable to LINE / PHM / MIC (line / MIC phantom power / MIC no phantom power) three input methods, EURBLOCK terminal
• 4 line balanced outputs, EURBLOCK terminal,
• Equipped with 4 Dante outputs
• 8 input channels each have 3 segments of parametric equalization, signal level meter and other processing modules
• Built-in 8 × 4 output mixer, the mix ratio of 8 input signal components in 4 output channels can be adjusted independently
• Manual and automatic mixing modes
• When mixing manually, each input signal can be arbitrarily assigned to each output with different proportions
• During automatic mixing, you can set the connected microphones to have only one or two to three microphones on at the same time, and automatically turn off when not talking. In the automatic mixing mode, the system also implements the following functions to ensure the implementation of automatic mixing.
• ▲ FORCE ON and FORCE OFF functions—Forcibly turning MIC on or off
• ▲ VIP setting function-with priority microphone to ensure the orderly conduct of the conference
• ▲ LAST MIC ON function—Keep a MIC on to pick up the background noise of the room
• ▲ NOMA function ～ Automatically adjust the output level of the system according to the number of MICs turned on, which will not increase the output gain of the system due to the superposition of input levels, and effectively suppress the formation of acoustic feedback
•  Multiple sets of factory or user parameter presets
• LCD screen character display, intuitive and concise
• With computer control interface, easy field adjustment
• Basic functions can be set through the panel or running related configuration software
• Input and output signals on the panel are five-segment LED level meters with a range of +6, 0, -10, -20, -40dB, etc.
• Four output channels are designed with 9-band graphic equalization, 24dB / oct roll-off high-pass and low-pass filters, signal compressors and limiters, and output level meters and other processing modules

The speaker uses a patented design of a 6.5-inch bass + 1 1-inch tweeter coaxial unit. In terms of sound quality, it not only has the characteristics of high phase fidelity of the full-range speaker, but also realizes the output of a more natural sound in the form of a standard point source. At the same time, it also has the powerful expressive power of the crossover speakers in the high and low frequencies, making its sound level more distinct and the sense of detail more prominent. The coaxial unit design can reduce the volume of the speaker as much as possible, and the appearance is more compact and elegant.

    The speakers use the Dante network audio interface and PoE network power supply to drive the power amplifier module. Only one network cable is needed to supply audio signals and power at the same time. Provides the terminal playback function of the digital audio system. Suitable for primary and secondary classrooms, small and medium conference rooms, corridor broadcasting and other places.

The BARE AF-D Series contains five models; AF-6D, AF-8D, AF-10D, AF-12D, AF-15D

AF-D series network active speaker is an active full-range speaker that integrates network transmission, pure digital power amplifier and RS-232 control and monitoring. With high efficiency and high sound energy output, excellent sound quality, perfect protection function and good electromagnetic compatibility characteristics. It has a backup analog input interface and a Dante network interface, and the transmission is dual-backup. A built-in Dante board can be connected through a network cable to implement network audio signal transmission. The router automatically assigns an IP address through the DHCP of the router, and performs signal transmission with the audio matrix with Dante function in the local area network, and can easily set up a fully digital network sound reinforcement system.

The speaker uses a patented design of a 6.5-inch bass + 1 1-inch tweeter coaxial unit. In terms of sound quality, it not only has the characteristics of high phase fidelity of the full-range speaker, but also realizes the output of a more natural sound in the form of a standard point source. At the same time, it also has the powerful expressive power of the crossover speakers in the high and low frequencies, making its sound level more distinct and the sense of detail more prominent. The coaxial unit design can reduce the volume of the speaker as much as possible, and the appearance is more compact and elegant.

    The speakers use the Dante network audio interface and PoE network power supply to drive the power amplifier module. Only one network cable is needed to supply audio signals and power at the same time. Provides the terminal playback function of the digital audio system. Suitable for primary and secondary classrooms, small and medium conference rooms, corridor broadcasting and other places.

CA-306Dante is a 6x3" full range column speaker with PoE and Dante connectivity.

CA-401Dante is a 4" full range column speaker with PoE and Dante connectivity.

CA-402Dante is a 2x4" full range column speaker with PoE and Dante connectivity.

▲ 4 audio (digital signal) inputs, 2 audio (digital signal) outputs, external GPIO

▲ ARM processor cooperates with embedded operating system to expand Cirrus Logic Audio Codec

▲ 24-bit, Σ- △ AD / DA, 44.1kHz, 48kHz, 88.2kHz, 96kHz sampling rates are optional,

▲ I2S digital audio format

▲ Freely set the sampling rate and equipment name

▲ Network audio transmission and control use standard Category 5 network cable (CAT5)

▲ Supports PCM16, PCM24, and PCM32 encodings, and can also use custom encoding formats

▲ 2 audio (digital signal) inputs, 2 audio (digital signal) outputs, external GPIO

▲ ARM processor cooperates with embedded operating system to expand Cirrus Logic Audio Codec

▲ 24-bit, Σ- △ AD / DA, 44.1kHz, 48kHz, 88.2kHz, 96kHz sampling rates are optional,

▲ I2S digital audio format

▲ Freely set the sampling rate and equipment name

▲ Network audio transmission and control use standard Category 5 network cable (CAT5)

▲ Supports PCM16, PCM24, and PCM32 encodings, and can also use custom encoding formats

▲ 2 audio (digital signal) inputs, 2 audio (digital signal) outputs, external GPIO

▲ ARM processor cooperates with embedded operating system to expand Cirrus Logic Audio Codec

▲ 24-bit, Σ- △ AD / DA, 44.1kHz, 48kHz, 88.2kHz, 96kHz sampling rates are optional,

▲   I2S digital audio format

▲ Freely set the sampling rate and equipment name

▲ Network audio transmission and control use standard Category 5 network cable (CAT5)

▲ Supports PCM16, PCM24, and PCM32 encodings, and can also use custom encoding formats

▲ 4 audio (digital signal) inputs, 2 audio (digital signal) outputs, external GPIO

▲ ARM processor cooperates with embedded operating system to expand Cirrus Logic Audio Codec

▲ 24-bit, Σ- △ AD / DA, 44.1kHz, 48kHz, 88.2kHz, 96kHz sampling rates are optional,

▲   I2S digital audio format

▲ Freely set the sampling rate and equipment name

▲ Network audio transmission and control use standard Category 5 network cable (CAT5)

▲ Supports PCM16, PCM24, and PCM32 encodings, and can also use custom encoding formats

MAP0808M-D4 is equipped with 8 analog inputs and 8 analog outputs, of which 4 input and output channels can be switched to Dante network audio input and output. DSP chip based on ADI 300MIPS processing rate to meet daily processing functions. Equipped with exclusive upper computer software , which can switch various inputs and change inputs, phantom power, etc. through the software. At the same time, software can adjust conventional parameters such as gain, noise gate, delay, phase, mute, and equalizer. Supports full matrix mixing mode, any input can be connected or mixed to any output at any ratio. Through USB-HDI eliminating connector or serial connection control in the control, all the parameters can be adjusted in real-time.

MAP08A is a 16- in- 16- out auto-mixing media matrix, equipped with 8 analog inputs and 8 analog outputs, built-in feedback suppression, automatic mixing, matrix mixing, equalizer, distributor, compressor and other DSP functions. This device supports Dante network audio function expansion. It can be connected to computer software control via USB driver-free , RS232, RS485, TCP / IP connection and remote control. It is suitable for sound reinforcement projects in various occasions.

Dante DP PoE Speaker is multifunctional with either POE power supply or 2 4VDC, audio transmission and signal control via a RJ45 Ethernet port. It can obtain power supply from any Ethernet switch of 802.3 or above standard. Over Dante™ Ethernet that transmits 24-bit audio (44.1K/48KHz) its control signal can be routed through the Dante™ Controller. All these functions can perform remotely on the PC or Mac by Dante Controller Software.

Dante DP3 PoE Speaker is equipped with POE power supply, audio transmission and signal control via a RJ45 Ethernet port. It can obtain power from any Ethernet switch of 802.3 or above standard. Dante DP3 adopts SSA inverter technology allowing that the high-quality enlargement of superior sound quality on this compact speaker of low power design. The system is built with a plastic body and 4pcs 3 inch high efficient Neodymium driver. Over Dante™ Ethernet that transmits 24-bit audio (44.1K/48KHz) and its control signal can be routed through the Dante™ Controller. Dante DP3 integrates versatile functions like gain control, mute control, 5-band equalizer control and DSP with limit control. All these functions can perform remotely on the PC or Mac by DS Controller Software.

Features:

1. Built-in Dante module
2. Built-in power amplifier module and system efficiency > 70%
3. DSP controlling software
4. PoE power supply
5. Over-current protection, Thermal protection and Overload protection

DMIC Dante Microphone is a microphone with a built-in Dante module supporting POE power supply. It can be directly connected to the Dante network, providing you a rewarding experience with extremely low latency, high fidelity and a low cost solution for paging and announcement.

Features:

Built-in Dante module
Rotate gain control
POE power supply
Smart on/off switch

Dante Panel series wall-mounted interface machines boast analog input and Dante digital input, analog line output and Dante digital output. The analog inputs support phantom power and manual preamp-gain adjustment. It is suitable for conference rooms and other professional applications. It available in black and white color.

Dante DSP 0404 Transmitter is designed for Dante network audio transmission and routing transfer of high quality and low latency network audio transmissionin multimedia systems.

DSP 0404 has analog channels of 4 balance input and 4 balance output. It can also provide phantom power for your microphone, as well as mute and gain adjustment on PC controlling software.

Features:

1. PoE power supply & DC12V power supply
2. Built-in Dante module
3. 4 balance input + 4 balance output
4. 48V phantom power supply
5. Windows software included

Features:

· High-performance ADI DSP processor, high-fidelity and low-noise 24-bit A / D and D / A conversion;

· Built-in Dante network transmission module, support 4 Dante signals / 4 analog signal inputs, 4 sets of digital power amplification output;

· With limited amplitude, frequency division, delay, PEQ, mute, inversion, gain adjustment, level indication functions, etc .;

· Multiple sets of scene save, recall, import and export functions;

· USB / network control interface, it can realize PC control for parameter configuration, scene recall and save;

· 3.97-inch color TFT resistive touch screen, Chinese and English menu operation, more comprehensive and intuitive display content

· Switch protection against shock, overcurrent, overheating, temperature detection after overheating protection, short circuit, DC protection;

This Dante adapter is designed with one RJ45 Dante input and two XLR analog outputs. This product enables simple connection of analog equipment to a Dante network, and can  receive audio channels from a Dante network and provide studio-quality, low-latency audio via an XLR connector to analog audio equipment. Any audio available on the Dante network can be routed via the XLR outputs to an amplifier, powered speaker, mixing console, digital signal processor(DSP), or other analog audio equipment.

Analog output version:Dante signal turns into analog audio signal output, when connecting an amplifier, a speaker, etc.

Analog input version: analog audio signal turns into Dante signal output, which is suitable for mixer, instrument, etc.

As with other Dante products, the freely available Dante Controller software application is used to automatically discover and configure Dante analog output module to the Dante network. Device names, channel labels, signal routing and other parameters(for example, sample rate and latency) can be configured via the network using Dante Controller. A variety of network and clock synchronisation diagnostic tools are also available in Dante Controller.

This Dante adapter uses Power over Ethernet(PoE). Power can be provided from a PoE-capable network switch, or from a separate PoE injector.

Features

1). PoE-based active speaker P14WA is an audio power module with 60w/4Ω output, which adopts the latest PoE technical standard. With only one network cable can realize power supply and Dante digital audio signal transmission and control;

2). Integrate PoE power supply and Dante audio data transmission to simplify cable layout and conform to Ethernet engineering specifications;

3). Digital and networked audio transmission realizes, high expendable system;

4). Distributed digital audio system: a large audio system of multiple input and output devices, decentralized audio device connection,  software routing and signal distribution;

5). Using Dante Controller software can easily realize fully networked Dante device detection and audio routing configuration;

6). Power amplifier features single RJ-45, 100Mbps of Dante audio transmission rate, routing control via Dante Controller, parametric volume, mute, limit, EQ and noise gate(optional) control, over-current, high temperature, overload/short circuit protection, natural heat dissipation;

7). Digital EQ adjustment and crossover. User can easily set EQ points and crossover frequencies matching the speaker.

The parameters and data set by user can be saved to the computer, the data on the computer and the machine can be read and called from each other;

8). PoE network cabling adopts the 48V DC power supply carried by Ethernet cable, free from all restrictions of high-voltage AD cabling, better satisfying the safety and fire prevention regulations;

9). Can be widely used in banquet hall/function hall, classroom, conference room, theme park, etc.

This Dante adapter is designed with one RJ45 Dante input and two XLR analog outputs. This product enables simple connection of analog equipment to a Dante network, and can  receive audio channels from a Dante network and provide studio-quality, low-latency audio via an XLR connector to analog audio equipment. Any audio available on the Dante network can be routed via the XLR outputs to an amplifier, powered speaker, mixing console, digital signal processor(DSP), or other analog audio equipment.

Analog output version:Dante signal turns into analog audio signal output, when connecting an amplifier, a speaker, etc.

Analog input version: analog audio signal turns into Dante signal output, which is suitable for mixer, instrument, etc.

As with other Dante products, the freely available Dante Controller software application is used to automatically discover and configure Dante analog output module to the Dante network. Device names, channel labels, signal routing and other parameters(for example, sample rate and latency) can be configured via the network using Dante Controller. A variety of network and clock synchronisation diagnostic tools are also available in Dante Controller.

This Dante adapter uses Power over Ethernet(PoE). Power can be provided from a PoE-capable network switch, or from a separate PoE injector.

Features

1). PoE-based active speaker P14CA(ceiling) is an audio power module with 60w/4Ω output, which adopts the latest PoE technical standard. With only one network cable can realize power supply and Dante digital audio signal transmission and control;

2). Integrate PoE power supply and Dante audio data transmission to simplify cable layout and conform to Ethernet engineering specifications;

3). Digital and networked audio transmission realizes, high expendable system;

4). Distributed digital audio system: a large audio system of multiple input and output devices, decentralized audio device connection,  software routing and signal distribution;

5). Using Dante Controller software can easily realize fully networked Dante device detection and audio routing configuration;

6). Power amplifier features single RJ-45, 100Mbps of Dante audio transmission rate, routing control via Dante Controller, parametric volume, mute, limit, EQ and noise gate(optional) control, over-current, high temperature, overload/short circuit protection, natural heat dissipation;

7). Digital EQ adjustment and crossover. User can easily set EQ points and crossover frequencies matching the speaker.

The parameters and data set by user can be saved to the computer, the data on the computer and the machine can be read and called from each other;

8). PoE network cabling adopts the 48V DC power supply carried by Ethernet cable, free from all restrictions of high-voltage AD cabling, better satisfying the safety and fire prevention regulations;

9). Can be widely used in banquet hall/function hall, classroom, conference room, theme park, etc.

BR-102D is a Dante interface with 12 microphone inputs . It is ideal for adding microphone inputs to Dante systems. The BR-102D can be installed near the sound source to minimize analog wiring that is prone to interference. Dante connection simplifies the system's infrastructure wiring. Each BR-102D unit can be connected to a network switch using a category 5 network cable. All adjustable parameters of BR-102D can be controlled by dante controller software. The BR-102D has 12 balanced microphones inputs. Each microphone input comes with a 48v phantom power switch that can independently switch phantom power. Each channel independently displays the channel level, and has an independent switch to adjust the input microphone volume. The front panel has indicators to show the power and network status for easy troubleshooting.