Dante-enabled Product Catalog

AtlasIED

AtlasIED – DNA2404DH

The DNA2404DH amplifier is an integral part of theAtlasIED GLOBALCOM® Communications System, allowing a few audio zones to be added where necessary when a full 16-zone T9160 amplifier frame is not required. The DNA2404DH amplifier is an integral part of theAtlasIED GLOBALCOM® Communications System, allowing a few audio zones to be added where necessary when a full 16-zone T9160 amplifier frame is not required. The amplifier features Audinate's Dante™ digital audio input and four channels of 600 watt amplification. The DNA2404DH is controlled with network commands for selecting input routing and configuring EQ, delay and output levels. Amplifiers may be controlled by a stand-alone GLOBALCOM® configuration utility or through the GLOBALCOM System Management Center.The internal amplifier cards are Class D (switching mode) dual channel 600W amplifiers into the rated loads (100-Volts into 16Ω). Class D operation, combined with an integral switching mode power supply, offers many advantages, and the uniqueAtlasIED design makes full use of these benefits. They include higher efficiency, increased reliability, improved performance, and lower operating cost. Switching mode operation combined with high voltage power MOSFET devices make it possible to eliminate the heavy, costly, bulky transformers.AtlasIED’s design is stable under all load conditions (phase angles of 0 to 360 degrees). The amplifier card has 34dB of gain from its analog input to the loudspeaker output. Attenuation is handled ahead of the power amplifier by DSP controls through software.

Amplifiers

Dante Ch: 4 In

See the product

ied-DNA2404DL_1200px|ied-DNA2404DL_1200px

AtlasIED

AtlasIED – DNA2404DL

The DNA2404DL amplifier is an integral part of theAtlasIED GLOBALCOM® Communications System, allowing a few audio zones to be added where necessary when a full 16-zone T9160 amplifier frame is not required. The DNA2404DL amplifier is an integral part of theAtlasIED GLOBALCOM® Communications System, allowing a few audio zones to be added where necessary when a full 16-zone T9160 amplifier frame is not required. The amplifier features Audinate's Dante™ digital audio input and four channels of 600 watt amplification. The DNA2404DL is controlled with network commands for selecting input routing and configuring EQ, delay and output levels. Amplifiers may be controlled by a stand-alone GLOBALCOM® configuration utility or through the GLOBALCOM System Management Center.The internal amplifier cards are Class D (switching mode) dual channel 600W amplifiers into the rated loads (70.7 Volts into 8Ω). Class D operation, combined with an integral switching mode power supply, offers many advantages, and the uniqueAtlasIED design makes full use of these benefits. They include higher efficiency, increased reliability, improved performance, and lower operating cost. Switching mode operation combined with high voltage power MOSFET devices make it possible to eliminate the heavy, costly, bulky transformers.AtlasIED’s design is stable under all load conditions (phase angles of 0 to 360 degrees). The amplifier card has 34dB of gain from its analog input to the loudspeaker output. Attenuation is handled ahead of the power amplifier by DSP controls through software.

Amplifiers

See the product

AtlasIED

AtlasIED – IED5404CS

TheAtlasIED5404CS digital microphone station is a 4-button device for initiating audio / visual announcements, messages and pages with the 5400ACS Announcement Control Systems. Just likeAtlasIED’s other digital microphone stations, the 5404CS uses a single Ethernet interface for audio and control data. The 5404CS is fully compatible with IEEE 802.3af standard for Power over Ethernet (PoE), allowing the microphone station to be powered directly from any standard off-the-shelf PoE switch.The 5404CS utilizes Dante™ technology for transporting high-quality, low-latency digital audio over Ethernet. The 5404CS microphone station may be used as part of an EN54-16 listed life safety system; although the mic stations themselves are not EN 54-16 listed and cannot be used for the emergency locations. Instead, in a dual-use system, these microphone stations may be used for everyday paging functions.

Microphones

24-bit
48kHz

See the product

AtlasIED

AtlasIED – IED5401CS

The 5401CS is a push-to-talk switch only digital microphone station. It is a network appliance with a unique IP address that requires no configuration. Just likeAtlasIED’s other digital microphone stations, the 5401CS uses a single Ethernet interface for audio and control data. The 5401CS is fully compatible with IEEE 802.3af standard for Power over Ethernet (PoE), allowing the microphone station to be powered directly from any standard off-the-shelf PoE switch.The 5401CS utilizes Dante™ technology for transporting high-quality, low-latency digital audio over Ethernet. The 5401CS microphone station may be used as part of an EN54-16 listed life safety system; although the mic stations themselves are not EN 54-16 listed and cannot be used for the emergency locations. Instead, in a dual-use system, these microphone stations may be used for everyday paging functions.

Microphones

24-bit
48kHz

See the product

Aviom

Aviom – D400-Dante

The D400-Dante A-Net Distributor provide the link between the personal mixing system's inputs and the Personal Mixers, providing power and a copy of the digital audio stream to your Aviom Personal Mixers, utilizing standard Cat-5e cables. The D400-Dante A-Net Distributor provide the link between the personal mixing system's inputs and the Personal Mixers, providing power and a copy of the digital audio stream to your Aviom Personal Mixers, utilizing standard Cat-5e cables. The D400-Dante has a Dante input, and allows up to 32 channels to be routed from a Dante-enabled console or digital audio network to the Personal Mixers.

Personal Mixing & Monitoring

Dante Ch: 32 In
44.1kHz-48kHz

See the product

junger-dap8_flx_1200px|junger-dap8_flx_1200px

Jünger

Jünger – Surround Audio Processor D*AP8 FLX

Providing an adaptable approach to digital audio processing, the D*AP8 FLX offers complete flexibility from a choice of multiple I/O formats including AES, SDI, MADI, Dante™ and analog, coupled with an extensive list of license based processing options to create a fully customized solution. Providing an adaptable approach to digital audio processing, the D*AP8 FLX offers complete flexibility from a choice of multiple I/O formats including AES, SDI, MADI, Dante™ and analog, coupled with an extensive list of license based processing options to create a fully customized solution in an efficient and space saving form factor. Designed to be easily upgradable through the installation of additional licenses, the D*AP8 FLX is a cost effective surround digital audio processor that can grow and expand to match the evolving needs of a wide range of applications. Available processing options include: Level Magic™ loudness management, compressor, expander, parametric EQ, Spectral Signature™ dynamic EQ, automatic surround Upmix and voice over functionality. The D*AP8 FLX can also be equipped with optional Dolby® decoding and encoding. By combining multiple I/O interfaces, the D*AP8 FLX can also function as a bridge between different standards such as Dante™, 3G SDI or MADI.

Audio Embedders & De-Embedders, DSPs (Digital Signal Processors), I/O Interfaces

Dante Ch: 16x16
44.1kHz-48kHz

See the product

Jünger

Jünger – Coding Audio Processor D*AP8 CODEC EDITION

The D*AP8 CODEC EDITION is designed to replace a wide range of legacy Dolby® processors wherever there is a requirement for decoding, encoding or transcoding of audio signals. Multiple audio I/O formats are supported including native AES along with optional SDI, MADI, Dante™ and analog. Developed in close cooperation with Dolby® Labs, the D*AP8 CODEC EDITION is designed to replace a wide range of legacy Dolby® processors wherever there is a requirement for decoding, encoding or transcoding of audio signals. Multiple audio I/O formats are supported including native AES along with optional 3G SDI, MADI, Dante™ and analog. Designed for use in all areas of audio broadcast and distribution, Jünger Audio’s D*AP8 CODEC EDITION offers the functionality to decode and/or encode any current Dolby® audio bitstream and to effectively manage and emulate all Metadata parameters. The D*AP8 CODEC EDITION has built in Dolby® decoding with metadata management and emulation as standard. Encoding is also available as an option. Network based loudness metering and voice over are standard whilst logging, automatic Upmix and fail over are optional. The following Dolby® formats are supported: Dolby® E, Dolby® Digital Plus, Dolby® Digital, Pro Logic II, AAC, HE-AAC.

AV Encoders & Decoders, DSPs (Digital Signal Processors), I/O Interfaces

Dante Ch: 64x64
24-bit

See the product

junger-dap8_map_1200px|junger-dap8_map_1200px

Jünger

Jünger – Monitoring Audio Processor D*AP8 MAP EDITION

The D*AP8 MAP EDITION is a multi-purpose audio device comprising of an 8 channel audio monitor, an optional comprehensive Dolby® toolkit including metadata emulation, along with loudness metering and logging capabilities. Supporting SDI, AES, MADI, Dante™ and analog I/O, the unit can handle all audio formats up to 7.1. The D*AP8 MAP EDITION is a multi-purpose audio device comprising of an 8 channel audio monitor, an optional comprehensive Dolby® toolkit including metadata emulation, along with full loudness metering and logging capabilities. Supporting 3G SDI, AES, MADI, Dante™ and analog I/O, the unit can handle all audio formats from mono up to 7.1 surround. Aimed at production, QC and live broadcast applications, Jünger Audio’s D*AP8 MAP EDITION is designed to serve as an ideal replacement and upgrade for the discontinued Dolby® DP570 Multi-Channel Audio Tool. Selectable Primary and Secondary inputs allow easy switching between source signals for monitoring and auditioning of either surround or stereo mixes. A fully featured downmix section, a speaker control section, matrix re-mapping and an output section with full bass management are part of the D*AP8 MAP EDITION’s comprehensive feature set. The D*AP8 MAP EDITION may be also equipped with optional Dolby® decoding and encoding.

AV Encoders & Decoders, Audio Monitors

Dante Ch: 16x16
44.1kHz-48kHz

See the product

junger-dap8_tap_1200px|junger-dap8_tap_1200px

Jünger

Jünger – Surround Audio Processor D*AP8 TAP EDITION

The D*AP8 TAP EDITION is the ideal solution for automatic and intelligent loudness management in real-time surround TV broadcast playout environments. Level Magic™ ensures maximum audio quality whilst maintaining compliance with all worldwide loudness standards. Multiple audio I/O formats are supported including AES, SDI, MADI, Dante™ and analog. The D*AP8 TAP EDITION is the ideal solution for automatic and intelligent loudness management in real-time surround TV broadcast playout environments. Jünger Audio’s Level Magic™ ensures maximum audio quality whilst maintaining compliance with all worldwide loudness standards. Multiple audio I/O formats are supported including native AES along with optional 3G SDI, MADI, Dante™ and analog, allowing the D*AP8 TAP EDITION to also function as a bridge between different standards such as Dante™, 3G SDI or MADI. The D*AP8 TAP EDITION audio processor features loudness control plus dynamic range processing for up to eight channels of audio. Optional Dolby® audio decoding and encoding including metadata management is also available, along with 5.1 Downmix and automatic Upmix features, sophisticated fail over and voice over solutions. Additionally, Jünger Audio’s Spectral Signature™ dynamic equalizer, a powerful creative tool that allows adaptive control of the spectral balance of your content is a standard feature.

Audio Embedders & De-Embedders, DSPs (Digital Signal Processors), I/O Interfaces

Dante Ch: 16x16
24-bit

See the product

junger-dap4_vap_1200px|junger-dap4_vap_1200px

Jünger

Jünger – Voice Audio Processor D*AP4 VAP EDITION

The fully featured dual mono or stereo D*AP4 VAP EDITION contains a suite of performance enhancing and creative audio processes dedicated to extracting the maximum potential quality from voice audio with dependable consistency. Flexible I/O options include AES, analog, 3G SDI, MADI, Dante™ and high quality microphone pre-amps. The fully featured dual mono or stereo D*AP4 VAP EDITION contains a suite of performance enhancing and creative audio processes dedicated to extracting the maximum potential quality from voice audio with dependable consistency. Flexible I/O options include AES, analog, 3G SDI, MADI, Dante™ and high quality microphone pre-amps. The D*AP4 VAP EDITION is designed to ensure that vocal quality and accuracy is always maintained at its best from program to program and day to day. A comprehensive feature set includes processing blocks such as: Mid/side matrix, phase-rotator, de-esser, compressor, expander, parametric EQ, Spectral Signature™ dynamic EQ, an automatic voice leveler, limiter, voice over and optional Level Magic™ loudness management. The D*AP4 VAP EDITION features not only a two channel voice signal path, but also a separate stereo program path for either standalone voice processing, or to provide automatic or manual integration of voice and program signals.

Microphone Preamps

Dante Ch: 8x8
24-bit

See the product

Jünger

Jünger – Stereo Audio Processor D*AP4 FLX

Providing an adaptable approach to digital audio processing, the D*AP4 FLX offers complete flexibility from a choice of multiple I/O formats including AES, SDI, MADI, Dante™ and analog, coupled with an extensive list of license based processing options to create a fully customized solution. Providing an adaptable approach to digital audio processing, the D*AP4 FLX offers complete flexibility from a choice of multiple I/O formats including AES, 3G SDI, MADI, Dante™ and analog, coupled with an extensive list of license based processing options to create a fully customized solution in an efficient and space saving form factor. Designed to be easily upgradable through the installation of additional licenses, the D*AP4 FLX is a cost effective dual stereo digital audio processor that can grow and expand to match the evolving needs of a wide range of applications. Available processing options include: Level Magic™ loudness management, compressor, expander, parametric EQ, Spectral Signature™ dynamic EQ, automatic fail over, voice over functionality and FM conditioning. An intuitive web interface provides control from anywhere in your network including mobile devices. All system parameters are remotely accessible allowing the unit to be operated by external control systems.

DSPs (Digital Signal Processors)

Dante Ch: 8x8
24-bit

See the product

Soundcraft

Soundcraft – Si Impact

Drawing on over 40 years experience in live sound mixing, Si Impact brings the latest digital mix innovations together with the unrivalled sound quality of Soundcraft. Drawing on over 40 years experience in live sound mixing, Si Impact brings the latest digital mix innovations together with the unrivalled sound quality of Soundcraft. Designed to be as simple as an analog mixer, but offer radical workflow enhancements such as the unique FaderGlow™ system, massive DSP power, and a pristine 32-in/32-out USB audio interface, Si Impact delivers digital live sound mixing and recording for those who refuse to compromise on audio quality. Key Features:

32 Mic Inputs
8 XLR/1/4" Combi-jacks for line inputs and instruments
40 DSP input channels (32 mono inputs and 4 stereo channels/returns)
31 Output busses (All with full DSP processing and GEQ)
4-band Fully Parametric EQ on each channel and bus
8 VCAs + 8 Mute groups
26 motorised faders (24 input + LR/Mono)
4 fully customisable Fader Layers
Built-in Stagebox Connectivity
5" touchscreen display
Multi-Colour LCD Channel Displays on each input fader
4 studio-grade Lexicon Effects engines and dedicated FX busses
BSS Graphic Equalisers on every bus
20 sub-group / aux busses
4 mono/stereo matrix busses
32x32 USB audio interface for multi-track recording and playback

Mixers

Dante Ch: 64x64

See the product

Studer

Studer – Vista V

The new Studer Vista V console harnesses Quad Star technology from the acclaimed Vista X to deliver a powerful, dependable and flexible broadcast audio mixing solution in a compact form factor. Studer's Vistonics™ interface and FaderGlow™ create a uniquely intuitive and stress-free operator experience, while the Infinity Core provides unprecedented levels of CPU-based processing power, handling the largest productions with ease. The new Studer Vista V console harnesses Quad Star technology from the acclaimed Vista X to deliver a powerful, dependable and flexible broadcast audio mixing solution in a compact form factor. Studer's Vistonics™ interface and FaderGlow™ create a uniquely intuitive and stress-free operator experience, while the Infinity Core provides unprecedented levels of CPU-based processing power, handling the largest productions with ease.

32-, 42- or 52-fader console with optional built-in meter bridge.
Harnesses Vista X Quad Star technology in a more compact form factor, for no single point of failure redundancy.
Fully surround-capable with versatile panning and monitoring functionality.
Sophisticated built-in Dynamic Automation system with DAW remote control.
High-quality motorised faders.
VistaMix – Studer's acclaimed automated microphone mixing algorithm, based on gain sharing. Runs directly on the Infinity Core with no external hardware required.
Infinity Core with 12 high-capacity A-Link ports (1536 channels/port) for D23m I/O integration or direct connection into routing systems including Riedel, Evertz, Artel, etc.
Easy integration into popular AoIP broadcast networks including Dante, Livewire, AES67, etc.
BSS DPR-901 Dynamic EQ Plug-In, assignable to any channel as desired and running directly on the Infinity Core.
Up to 6 Lexicon PCM96 Surround high quality reverb processors can be connected with their parameters stored in the mixer's snap shots and accessible directly from the Vistonics Interface.
Connecting up to 4 Soundcraft Realtime Racks gives the user access to Universal Audio's huge UAD plug-in library. Parameters are stored and managed directly in the mixer's CUE-List automation.
Ember and Pro-Bel protocol support for use with broadcast/newsroom automation systems.

Mixers

Dante Ch: 64x64
AES67 Enabled

See the product

Studer

Studer – OnAir 2500

Studer’s new OnAir 2500 digital all-in-one console utilises the well-established software technology derived from the highly acclaimed OnAir 3000 console to deliver a new standard in ease-of-use for Radio Broadcast. Studer’s new OnAir 2500 digital all-in-one console utilises the well-established software technology derived from the highly acclaimed OnAir 3000 console to deliver a new standard in ease-of-use for Radio Broadcast. The Studer OnAir 2500 is a totally self-contained system and builds upon the operational concepts of its successful predecessor, the OnAir 2000. With the OnAir 2500, the control surface, I/O breakout, DSP Core and power supply are all integrated within a single compact chassis. For such a compact package, the Studer OnAir 2500 offers unrivalled flexibility and operational ease.

Personal Mixing & Monitoring

Dante Ch: 64x64
24-bit

See the product

Studer

Studer – OnAir 2500 Modulo

Studer has introduced a new modular version of the successful OnAir 2500 Broadcast console for installation in custom studio furniture. Studer has introduced a new modular version of the successful OnAir 2500 Broadcast console for installation in custom studio furniture. The new model, named the OnAir 2500 Modulo, has separate modules for fader bays and master section, along with a rack-mountable mainframe which houses the power supply and host processing. These modules can be recessed into a desktop for a clean installation with all cables integrated within the furniture and the mainframe hidden appropriately. For such a compact package, the Studer OnAir 2500 offers unrivalled flexibility and operational ease.

Personal Mixing & Monitoring

Dante Ch: 64x64
48kHz

See the product

Studer

Studer – OnAir 3000

The Studer OnAir 3000 further extends Studer’s range of digital broadcast consoles with a completely new design aimed at the medium to upper segment of the radio market including private and public network broadcast stations. The Studer OnAir 3000 further extends Studer’s range of digital broadcast consoles with a completely new design aimed at the medium to upper segment of the radio market including private and public network broadcast stations. The operating concept of the OnAir 3000 will be totally familiar to Studer users, as the wide range of compact and elegant control surface modules incorporates the same patented “Touch-n-Action” philosophy as the highly successful Studer OnAir 2000, using colour GUI screens. The OnAir 3000 design is based on a completely modular desk and a new DSP engine. The fader module includes six fader strips, and up to eight fader modules may be fitted, giving a maximum console size of 48 faders. Layout options range from a highly comprehensive engineer-operated continuity console to a single fader panel for DJ and newsroom use or even a PC-operated system with no physical desk controls. The console has three main stereo mix buses plus an audition facility, four stereo AUX buses, 16 mix-minus sends configurable as AUXes, and three independent studio monitoring circuits and offers full dynamics, EQ and input/output routing in each channel.

Personal Mixing & Monitoring

Dante Ch: 64x64
48kHz

See the product

Studer

Studer – OnAir 3000 Modulo

The Studer OnAir 3000 further extends Studer’s range of digital broadcast consoles with a completely new design aimed at the medium to upper segment of the radio market including private and public network broadcast stations. The Studer OnAir 3000 further extends Studer’s range of digital broadcast consoles with a completely new design aimed at the medium to upper segment of the radio market including private and public network broadcast stations. The operating concept of the OnAir 3000 will be totally familiar to Studer users, as the wide range of compact and elegant control surface modules incorporates the same patented “Touch-n-Action” philosophy as the highly successful Studer OnAir 2000, using colour GUI screens. The OnAir 3000 design is based on a completely modular desk and a separate DSP engine. The fader module includes six fader strips, and up to eight fader modules may be fitted, giving a maximum console size of 48 faders. Layout options range from a highly comprehensive engineer-operated continuity console to a single fader panel for DJ and newsroom use or even a PC-operated system with no physical desk controls. The console has three main stereo mix buses plus an audition facility, four stereo AUX buses, 16 mix-minus sends, configurable as AUXes and three independent studio monitoring circuits and offers full dynamics, EQ and input/output routing in each channel.

Personal Mixing & Monitoring

Dante Ch: 64x64

See the product

Bose Professional

Bose – ControlSpace EP22-D

The Bose® ControlSpace® EP22-D Dante endpoint is a convenient and cost-effective 2-in/2-out analog audio interface. The small form factor with PoE make it easy to locate close to analog devices, helping to reduce costly and interference-prone analog wiring. The ControlSpace EP22-D Dante endpoint is a 2in/2out, convenient and cost-effective way to add mic/line audio input and output channels to a Dante-based networked audio system. The small form factor of the EP22-D and PoE power capability make it easy to put Dante connectivity wherever it’s needed—near the audio source or sink—thereby eliminating costly and interference-prone analog wiring. Setup and control, including like mic/line input gain, output gain and phantom power, as well as Dante audio routing are all integrated in ControlSpace Designer™ software.

I/O Interfaces

Dante Ch: 2x2
24-bit

See the product

Bose Professional

Bose – ControlSpace EP40-D

The Bose® ControlSpace® EP40-D 4-input Dante endpoint adds 4 mic/line inputs to a Dante-based network audio system. Front-panel indicators show channel gain/pad and phantom power status for easy troubleshooting. The ControlSpace EP40-D 4 input Dante endpoint is the ideal interface for adding mic/line inputs to a Dante system. The small form factor of the EP40-D allows it to be mounted almost anywhere, putting it close to audio sources and minimizing interference-prone analog wiring. The EP40-D features four balanced mic/line inputs, each with software selectable +48V phantom power and 8 gain levels. Front panel indicators show each channel’s gain and phantom power status for easy troubleshooting. The EP40-D has two network connections to allow Dante daisy chaining. Dante daisy-chaining further simplifies system infrastructure wiring by allowing multiple EP40-Ds to use a single CAT-5 home run connection to a network switch. Power can also be daisy chained. The EP40-D is powered by either an external +24VDC supply or any PoE network switch. Setup and control, including like mic/line input

I/O Interfaces

See the product

WorxAudio

WorxAudio – TrueLine V5M

Like all loudspeakers systems in the WorxAudio TrueLine Series, the transducer complements in the V5M are top notch. Like all loudspeakers systems in the WorxAudio TrueLine Series, the transducer complements in the V5M are top notch. This outstanding loudspeaker incorporate a medium format 1-inch exit compression driver coupled to a stabilized, proprietary FlatWave Former (wave shaping device) that delivers clear, penetrating high frequencies over a predictable and controlled coverage area. Dual 5-inch cone transducers coupled to the Acoustic Intergrading Module (A.I.M.) minimize cone filtering throughout the entire operating range. Collectively, this system deliver a rich, fully balanced sound that must be heard to be appreciated. Of particular note, the new WorxAudio V5M has a 120-degree symmetrical horizontal coverage pattern and a 30-degree vertical dispersion pattern. This arrangement facilitates consistent sound quality both on- and off-axisresulting in dramatically improved speech intelligibility and music reproductionmaking them a terrific choice for both monitor and fill usage. Built to withstand the most demanding applications, the V5Ms enclosure is constructed from sturdy multi-ply Baltic Birch and is heavily braced for cabinet rigidity, yet it weighs only thirty pounds. Protecting the enclosure is a multi-layered, polyurea finish that is available in black or white. A 16-guage, perforated, cloth-backed, powder coated steel grill with a high transmission ratio protects the transducer complement.

Speakers

See the product

WorxAudio

WorxAudio – TrueLine V5

The V5 is a two-way, high efficiency, line array loudspeaker. It is designed as an ultra compact high performance system to deliver high quality reinforcement of music and speech in a variety of applications including concert audio and corporate A/V presentations of all types for both portable users and fixed venue installations. The V5 is a two-way, high efficiency, line array loudspeaker. It is designed as an ultra compact high performance system to deliver high quality reinforcement of music and speech in a variety of applications including concert audio and corporate A/V presentations of all types for both portable users and fixed venue installations. The V5 incorporates a medium format 1” exit compression driver coupled to a stabilized proprietary FlatWave Former (wave shaping device) that delivers clear but penetrating high frequencies over a predictable and controlled coverage area. Dual 5” neo magnet cone transducers coupled to the (A.I.M. Acoustic Integrating Module minimizes comb filtering throughout the entire operating range. A sturdy multi-ply plywood enclosure, with a multi-layered catalyzed polyurea finish, will withstand the most demanding portable applications. A perforated, powder coated steel grill with a high transmission ratio offers excellent protective properties. The custom designed flyware enables the user to easily array the system to the precise desired coverage area. The V5 is available in dark black or white exterior. The V5 excels in a myriad of diverse applications requiring a compact line array enclosure. Superior workmanship and transparent sonic quality make the V5 an exceptional tool for any speaker system.

Speakers

See the product

WorxAudio

WorxAudio – TrueLine X1

The X1 is a two-way, high efficiency, line array loudspeaker. It is designed as an ultra compact high performance system for the reproduction of speech and music program material. The X1 is a two-way, high efficiency, line array loudspeaker. It is designed as an ultra compact high performance system for the reproduction of speech and music program material. The X1 incorporates a medium format 1″ exit compression driver coupled to a stabilized proprietary FlatWave Former that delivers clear but penetrating high frequencies over a predictable and controlled coverage area. Dual 8″ cone transducers coupled to the (A.I.M.) Acoustic Intergrading Module minimizing cone filtering throughout the entire operating range. A sturdy multi-ply plywood enclosure, with a multi-layered catalyzed polyurethane finish, will withstand the most demanding portable applications. A perforated, powder coated steel grill with a high transmission ratio offers excellent protective properties. The custom designed flyware enables the user to easily array the system to the procise desired coverage area. The X1T-P is available in dark black or white exterior. The X1T-P excels in a myriad of diverse applications requiring a compact line array enclosure. Superior workmanship and transparent sonic quality make the X1T-P an exceptional tool for any speaker system.

Speakers

See the product

WorxAudio

WorxAudio – TrueLine X115

The TrueLine X115 is designed to satisfy the need for an extreme high SPL extended bass loudspeaker system. Components have been selected solely for their performance. The TrueLine X115 is designed to satisfy the need for an extreme high SPL extended bass loudspeaker system. Components have been selected solely for their performance. The TrueLine X115 utilizes a single direct radiating 15” 1000W continuous power handling cone driver in a tuned enclosure, which provides maximum output with minimal distortion and smooth extended low frequency response. The tour-tested 13 ply Baltic Birch highly braced enclosure and 15mm thick baffle board construction provide unsurpassed rigidity and strength. The enclosure is built to truck pack dimensions for efficient transportation of multiple units, and should be arrayed to increase performance in large or outdoor venues. The TrueLine X115 is designed to be used for low frequency sections in multi-way speaker systems. All X-Series or bass section in any sound system requiring low frequency response and quality audio reproduction can use the TrueLine X115. The TrueLine X115 comes with a multi-layered catalyzed Polyurea finish and is offered with black and white as color options. The TrueLine X115 delivers the transparent sonic quality and easy portability necessary for the demands of professional audio today.

Speakers

See the product

WorxAudio

WorxAudio – TrueLine X1M

The X1M-P is a two-way, high efficiency, line array loudspeaker. It is designed as an ultra compact high performance system for the reproduction of speech and music program material. The X1M-P is a two-way, high efficiency, line array loudspeaker. It is designed as an ultra compact high performance system for the reproduction of speech and music program material. The X1M-P incorporates a medium format 1″ exit compression driver coupled to a stabilized proprietary FlatWave Former that delivers clear but penetrating high frequencies over a predictable and controlled coverage area. Dual 8″ cone transducers coupled to the (A.I.M.) Acoustic Intergrading Module minimizing cone filtering throughout the entire operating range. A sturdy multi-ply plywood enclosure, with a multi-layered catalyzed polyurethane finish, will withstand the most demanding portable applications. A perforated, powder coated steel grill with a high transmission ratio offers excellent protective properties. The custom designed flyware enables the user to easily array the system to the precise desired coverage area. The X1M-P is available in dark black or white exterior. The X1M-P excels in a myriad of diverse applications requiring a compact line array enclosure. Superior workmanship and transparent sonic quality make the X1M-P an exceptional tool for any speaker system.

Speakers

See the product

WorxAudio

WorxAudio – TrueLine X2

The X2 is a two-way, high efficiency, line array loudspeaker. It is designed as an all-in-one ultra compact high performance system for the reproduction of speech and music program material. The X2 is a two-way, high efficiency, line array loudspeaker. It is designed as an all-in-one ultra compact high performance system for the reproduction of speech and music program material. The X2 incorporates two medium format 1” exit compression drivers coupled to a stabilized proprietary FlatWave Former that delivers clear but penetrating high frequencies over a predictable and controlled coverage area. The X2 has a Horizontal pattern of 160 degrees and a Vertical of 30 degrees. Quad 8” cone transducers coupled to the (A.I.M.) Acoustic Integrating Module minimizes comb filtering throughout the entire operating range. A sturdy multi-ply plywood enclosure, with a multi layered catalyzed Polyurea finish, will withstand the most demanding portable applications. A perforated, powder coated steel grill with a high transmission ratio offers excellent protective properties. The custom designed flyware enables the user to easily array the system to the precise desired coverage area. The X2 is available in black or white exterior. The X2 excels in a myriad of diverse applications requiring a compact line array enclosure. Superior workmanship and transparent sonic quality make the X2 an exceptional tool for any speaker system.

Speakers

See the product

WorxAudio

WorxAudio – TrueLine X3

The X3 is a two-way, high efficiency, line array loudspeaker. It is designed as an all-in-one ultra compact high performance system for the reproduction of speech and music program material. The X3 is a two-way, high efficiency, line array loudspeaker. It is designed as an all-in-one ultra compact high performance system for the reproduction of speech and music program material. The X3 incorporates three medium format 1” exit compression drivers coupled to a stabilized proprietary FlatWave Former that delivers clear but penetrating high frequencies over a predictable and controlled coverage area. The X3 has a Horizontal pattern of 160 degrees and a Vertical of 40 degrees. Six 8” cone transducers coupled to the (A.I.M.) Acoustic Integrating Module minimizes comb filtering throughout the entire operating range. A sturdy multi-ply plywood enclosure, with a multi layered catalyzed Polyurea finish, will withstand the most demanding portable applications. A perforated, powder coated steel grill with a high transmission ratio offers excellent protective properties. The custom designed flyware enables the user to easily array the system to the precise desired coverage area. The X3 is available in black or white exterior. The X3 excels in a myriad of diverse applications requiring a compact line array enclosure. Superior workmanship and transparent sonic quality make the X3 an exceptional tool for any speaker system.

Speakers

See the product

WorxAudio

WorxAudio – TrueLine X5

The X5 is a two-way, high efficiency, line array loudspeaker. It is designed as an All-In-One ultra-compact high performance system for the reproduction of speech and music program material. The X5 is a two-way, high efficiency, line array loudspeaker. It is designed as an All-In-One ultra-compact high performance system for the reproduction of speech and music program material. The X5 incorporates five modules each encompassing a medium format 1-inch exit compression driver coupled to a stabilized proprietary FlatWave Former that delivers clear, penetrating high frequencies over a predictable and controlled coverage area. Dual 8-inch cone transducers coupled to the (A.I.M.) Acoustic Integrating Module minimizes comb filtering throughout the entire operating range. With a total of five high frequency drivers and ten bass drivers, the X5 delivers a Horizontal pattern of 160 degrees and a Vertical of 40 degrees, with a sturdy multi-ply plywood enclosure, and a multi-layered, catalyzed Polyurea finish to withstand the most demanding portable applications. A perforated, powder coated steel grill with a high transmission ratio offers excellent protection for the transducers. The custom designed flyware enables the user to easily array the system to the precise desired coverage area. The X5 is available in black or white exterior. The X5 excels in a myriad of diverse applications requiring a compact line array enclosure. Superior workmanship and transparent sonic quality make the X5 an exceptional tool for any speaker system.

Speakers

See the product

Dante-enabled Product Catalog

Categories

Manufacturer

Features

Specifications

AtlasIED – DNA2404DH

AtlasIED – DNA2404DL

AtlasIED – IED5404CS

AtlasIED – IED5401CS

Aviom – D400-Dante

Jünger – Surround Audio Processor D*AP8 FLX

Jünger – Coding Audio Processor D*AP8 CODEC EDITION

Jünger – Monitoring Audio Processor D*AP8 MAP EDITION

Jünger – Surround Audio Processor D*AP8 TAP EDITION

Jünger – Voice Audio Processor D*AP4 VAP EDITION

Jünger – Stereo Audio Processor D*AP4 FLX

Soundcraft – Si Impact

Studer – Vista V

Studer – OnAir 2500

Studer – OnAir 2500 Modulo

Studer – OnAir 3000

Studer – OnAir 3000 Modulo

Bose – ControlSpace EP22-D

Bose – ControlSpace EP40-D

WorxAudio – TrueLine V5M

WorxAudio – TrueLine V5

WorxAudio – TrueLine X1

WorxAudio – TrueLine X115

WorxAudio – TrueLine X1M

WorxAudio – TrueLine X2

WorxAudio – TrueLine X3

WorxAudio – TrueLine X5

Stay connected to Dante

Support

Company

Dante Networking Alliance

Dante-enabled Product Catalog

Activating Third Party Apps