The XDANTE-1 Dante Network Audio Changeover System Provides a simple and efficient way to switch between dual-redundant Dante sources at the push of a single button.
The XDANTE-1 Dante Network Audio Changeover System Provides a simple and efficient way to switch between dual-redundant Dante sources.
The unit consists of two independently controllable 64 into 32 channel Dante switchers. These can be combined to allow switching of up to 128 inputs to 64 outputs.
The unit is housed in a 1U 19” rackmount enclosure, with dual redundant switch mode PSUs as standard.
The new Network DI from ARX is an analog breakout box using the popular Dante network protocol to extract audio from a network and convert it to Transformer isolated analog audio, suitable for connecting to mixing consoles and other devices requiring an analog source.
The new Network DI from ARX is an analog breakout box using the popular Dante network protocol to extract audio from a network and convert it to Transformer isolated analog audio, suitable for connecting to mixing consoles and other devices requiring an analog source.
A Mono switch on the front panel provides Left and Right analog summation for applications requirig a mono signal.
The Network DI is housed in a heavy duty all-steel chassis finished in attractive matt textured polyurethane, with hardwearing epoxy screen printing and slip resistant rubber base pad.
Security features include an optional bracket kit for under-table mounting.
The ARX NetSplit is a unique ‘Dante / Analog Splitter that is switchable into Dante mode or Analog mode.
The ARX NetSplit is a unique ‘Dante / Analog Splitter that is switchable into either of two modes:
In Dante mode it will extract 2 channels of digital audio from the network via aRJ45 Ethernet input, and split them to 2 channels of 1:4 splitter
In Analog mode it can take 2 channels of Analog audio, and split them to 2 channels of 1:4 splitter
The NetSplit can receive audio channels from a Dante network and provide studio quality, low latency audio via balanced XLR output connectors to analog audio equipment.
Thus any audio available on the network can be routed via the NetSplit to an amplifier, powered speaker(s), mixing console, digital signal processor and many other analog audio devices.
The NEXUS system is an audio network, a router, and an I/O matrix that also offers the following:
Audio-format conversion
A/D and D/A converter systems
Audio processing
Data forwarding
Routing interfaces
Multi-channel metering
Power-amplifier control
Intercom
Logical functions, and much more
NEXUS Base Devices are compact 19" mainframes for static or mobile use. 1 U, 3 U, 6 U, 9 U, 12 U, and 15 U versions are available. Input and output ports are on 3 U slide-in boards. NEXUS Base Devices are based on a 4 HP grid and accommodate modular boards such as I/O boards for analogue and digital audio, DSP boards for audio processing, special routing boards for data or switching signals and fibre-optic interface boards for interconnecting Base Devices.
The NEXUS system integrates with Dante using the Stage Tec NEXUS XDIP interface card.
The IPD-HP82-EZ is an 8" open-ceiling speaker.
The IPD-HP82-EZ is an 8" open-ceiling speaker. Dante®-addressable coaxial pendant speaker incorporates one 8.0 inch (203 mm) high power coaxial driver with BroadBeamHP™ compression driver technology for long throw and smooth directivity. Low latency digital audio, power, and control are delivered to the speaker via standard category cable; connection is made on the other end to the STNet-Switch or other PoE / PoE+ switch. May also be powered via a 24V DC barrel connector for non-PoE installations. Configuration and zoning of the speaker are accomplished via software. Includes hanging hardware with galvanized steel cables and hanging bracket for fast, easy and secure installation. Unit may be hung or mounted direct-to-conduit via locking cover plate. Enclosure constructed of injection molded ABS with glasber reinforcement for lasting durability in indoor or outdoor applications. Aluminum grille with protective powder coated finish.
The Panaray MSA12X loudspeaker advances the Bose Professional line of modular arrays with a self-powered electronically-steerable loudspeaker offering consistent audio levels with outstanding vocal intelligibility and fullrange music reinforcement.
The Panaray MSA12X loudspeaker advances the Bose Professional line of modular arrays with a self-powered electronically-steerable loudspeaker offering consistent audio levels with outstanding vocal intelligibility and fullrange music reinforcement.
The MC850-CV-D is an 8 channel, 70/100V, 1RU amplifier delivering 50W per channel with channel-to-channel power sharing, Ethernet and RS-232 control. The MC850-CV-D amplifier supports Dante™ audio and has AES67 support.
The MC850-CV-D is an 8 channel, 70/100V, 1RU amplifier delivering 50W per channel with channel-to-channel power sharing, Ethernet and RS-232 control. The MC850-CV-D amplifier supports Dante™ audio and has AES67 support.
The MC850 family embodies the future of smart amplification with networked audio inputs, Ethernet configuration, control and reporting and flexible power allocation between channels. Whether it’s low impedance, 70V/100V or a mix of the two, there is a model for you with 8 channels and a total of 400W. Setup and configuration can be done anywhere with network access allowing the installer to locate in the zone for real time feedback. The software is simple, intuitive and targeted in scope to make set up easy and allow for granular control. There are 8 independent Dante™ inputs. The MC850 family is AES67 compatible. We built the MC850 family with the network in mind and you’ll find it shows.
• 8 independent Dante™ inputs
• Primary and Secondary Dante™ ports (redundant or switched)
• Ethernet port for control and reporting
• RS-232 control
• Power sharing up to 100W per channel
• Compact 1RU enclosure
• Made in USA
The MC850-LZ-D is an 8 channel, 4/8 Ohm, 1RU amplifier delivering 50W per channel with channel-to-channel power sharing, Ethernet and RS-232 control. The MC850-LZ-D amplifier supports Dante™ audio and has AES67 support.
The MC850-LZ-D is an 8 channel, 4/8 Ohm, 1RU amplifier delivering 50W per channel with channel-to-channel power sharing, Ethernet and RS-232 control. The MC850-LZ-D amplifier supports Dante™ audio and has AES67 support.
The MC850 family embodies the future of smart amplification with networked audio inputs, Ethernet configuration, control and reporting and flexible power allocation between channels. Whether it’s low impedance, 70V/100V or a mix of the two, there is a model for you with 8 channels and a total of 400W. Setup and configuration can be done anywhere with network access allowing the installer to locate in the zone for real time feedback. The software is simple, intuitive and targeted in scope to make set up easy and allow for granular control. There are 8 independent Dante™ inputs. The MC850 family is AES67 compatible. We built the MC850 family with the network in mind and you’ll find it shows.
8 independent Dante™ inputs
Primary and Secondary Dante™ ports (redundant or switched)
The MC850-MXZ-D has 6 channels @ 70/100V, and 2 channels @ 4/8 Ohm. The 1RU amplifier delivers 50W per channel with channel-to-channel power sharing.
The MC850-MXZ-D has 6 channels @ 70/100V, and 2 channels @ 4/8 Ohm. The 1RU amplifier delivers 50W per channel with channel-to-channel power sharing. It has Ethernet and RS-232 control. The MC850-MXZ-D amplifier supports Dante™ audio and has AES67 support.
The MC850 family embodies the future of smart amplification with networked audio inputs, Ethernet configuration, control and reporting and flexible power allocation between channels. Whether it’s low impedance, 70V/100V or a mix of the two, there is a model for you with 8 channels and a total of 400W. Setup and configuration can be done anywhere with network access allowing the installer to locate in the zone for real time feedback. The software is simple, intuitive and targeted in scope to make set up easy and allow for granular control. There are 8 independent Dante™ inputs. The MC850 family is AES67 compatible. We built the MC850 family with the network in mind and you’ll find it shows.
8 independent Dante™ inputs
Primary and Secondary Dante™ ports (redundant or switched)
With total control of all processing via the front panel, and all the remote options you could ever need, the new DPA Series can work alongside your existing amplifiers, with improved flexibility, performance and protection.
With total control of all processing via the front panel, and all the remote options you could ever need, the new DPA Series can work alongside your existing amplifiers, with improved flexibility, performance and protection.
Combining new technology power amplification with the highest definition XTA DSP, the DPA Series take audio performance and convenience to a whole new level. Powerful processing features such as FIR filtering and Dante Networking work alongside unique enhancements including 4 local + 4 aux DSP channels (also supplied to the network), meaning a single DPA amplifier can control a stereo 4-way system with no external processing and supply audio to a Non-DSP amplifier either via analogue or a single Cat5 cable. Control via new AudioCore with advanced grouping architecture, or go wireless with our bespoke iPad app DeltaDirect.
Configure and tune using a fast, powerful combination of AudioCore (XTA’s fast efficient control software platform) and DeltaDirect, the bespoke iPad app. Every aspect of a network of amplifiers can be controlled and monitored wirelessly.
Direct Ethernet, USB, and RS485 control options plus configurable GPIO offer unparalleled remote control flexibility.
Now you don’t have to choose between the highest quality amplification, and digital audio networking convenience. Or between incredible power and the ability to work within analogue or digital systems. You can have it all.
Now you don’t have to choose between the highest quality amplification, and digital audio networking convenience. Or between incredible power and the ability to work within analogue or digital systems. You can have it all.
The DNA Series offers the assurance of XTA’s highest quality audio power amp technology with future proofing via the inclusion of simple to use digital audio networking.
Fast rear panel switching allows the amplifier to accept either four channels of analogue audio or pick up four channels of networked audio, via Dante, which is then converted using 24 bit 96kHz ADCs.
Connect to an DPA amplifier using a single CAT5 cable to realise a stereo 4 way system with no further external processing required. Switch back to analogue to use as a powerful traditional quad channel amplifier. Run bridged channel pairs or link adjacent inputs for total flexibility in either analogue or digital mode.
Deliver exceptional audio quality to every space with the ultra-small-footprint Solaro QR1, a PoE-powered digital signal processor with eight user-configured I/O card slots. This open-architecture product can be populated with all combinations of Solaro Series I/O card, offering capabilities including analog audio, USB (with volume/mute status sync), GPIO, relay control and AES/EBU digital audio. Additionally, Solaro QR1 connects to an installed network over standard CatX cable with in-built 4x4 Dante audio networking, for streamlined connection of ceiling microphones and other IP-based audio products. With license-activated HearClear acoustic echo cancellation and an integrated control engine capable of Lua scripting, Solaro QR1 is an ideal solution for individual conference rooms, classrooms and legislative spaces at an exceptional price-point.
Solaro FR1 is a 1U 16-card-slot DSP with modular I/O functionality that can evolve to meet your future requirements, while benefiting from the processing power to drive multiple rooms over an installed CatX network. Xilica's open-architecture digital signal processor can be populated with any combination of Solaro Series I/O card, offering capabilities including analog audio, USB (with volume/mute HID support), GPIO, relay control and AES/EBU digital audio. Incorporating the optional XC-CTODN module for networked audio, Solaro FR1 can handle up-to 64x64 bi-directional channels of audio over Dante, using standard CatX cable with no proprietary switches. With the capability to grow as you need, Solaro FR1 is a multi-purpose, scalable signal processor suited to most medium-to-large applications including multi-room conferencing, education spaces, and mass communication.
The SF-BNC2 is a bidirectional Dante audio network interface. It features two unbalanced audio inputs (left and right) on RCA or stereo 3.5 mm Mini-jack connectors, as well as two unbalanced audio outputs (left and right) on RCA and stereo 3.5 mm Mini-jack connectors.
The SF-BNC2 is a bidirectional Dante audio network interface. It features two unbalanced audio inputs (left and right) on RCA or stereo 3.5 mm Mini-jack connectors, as well as two unbalanced audio outputs (left and right) on RCA and stereo 3.5 mm Mini-jack connectors. Special software is not required to configure the SF-BNC2. Each input provides a network digital audio level of -20 dBFS for an unbalanced -10 dBV input. Each output provides -10 dBV unbalanced for a network digital audio level of -20 dBFS. The SF-BNC2 is a professional grade product for studio quality fidelity and low noise performance.
The SF-BNC2 is PoE powered. Valid PoE power and synchronization to the Dante network is indicated by a green LED visible from the front of the unit.
The SF-BNC2 is constructed in a durable, professional all-metal enclosure suitable for free-standing, surface-mounted or rack-mounted operation. This full-featured SYSFLEX product is engineered and manufactured in the U.S.A for continuous duty in demanding installations. The versatility of SYSFLEX products adds enormous flexibility in the design and installation of professional A/V systems.
Features:
Dante Network Interface for Two Audio Inputs and Two Audio Outputs
Inputs and Outputs on Front-Panel RCA Jacks and Stereo 3.5 mm Mini-Jacks
The SF-DN4 is a digital audio interface that converts two stereo digital audio sources to four Dante network audio channels.
The SF-DN4 is a digital audio interface that converts two stereo digital audio sources to four Dante network audio channels. The SF-DN4 automatically detects a valid input on any of the three input jacks: S/PDIF optical, S/PDIF coaxial, or AES/EBU XLR. The input is decoded, re-clocked and transmitted to the Dante network. A yellow front-panel LOCK LED indicates a valid source received without any lock errors. Special software is not required to configure the module. The SF-DN4 is a professional grade product for studio quality performance.
The SF-DN4 is PoE powered. Valid PoE power and synchronization to the Dante network is indicated by a green LED visible from the front of the unit.
The SF-DN4 is constructed in a durable, professional all-metal enclosure suitable for free-standing, surface-mounted or rack-mounted operation. This full-featured SYSFLEX product is engineered and manufactured in the U.S.A for continuous duty in demanding installations. The versatility of SYSFLEX products adds enormous flexibility in the design and installation of professional A/V systems.
Features:
Converts Two Left/Right Digital Audio Sources to Four Dante Network Audio Signals
AES/EBU or S/PDIF Coaxial or Optical Inputs
Supports Input Sampling Rates from 44.1 kHz to 192 kHz
The SF-ND2 is a digital audio interface that converts two Dante network audio channels to a stereo digital audio output.
The SF-ND2 is a digital audio interface that converts two Dante network audio channels to a stereo digital audio output. The output is switch-selectable to provide an AES/EBU on XLR, or coaxial and optical S/PDIF. The switch enables the appropriate output jack and any required electrical and data format conversion. Special software is not required to configure the module. The SF-ND2 is a professional grade product for studio quality performance.
The SF-ND2 is PoE powered. Valid PoE power and synchronization to the Dante network is indicated by a green LED visible from the front of the unit.
The SF-ND2 is constructed in a durable, professional all-metal enclosure suitable for free-standing, surface-mounted or rack-mounted operation. This full-featured SYSFLEX product is engineered and manufactured in the U.S.A for continuous duty in demanding installations. The versatility of SYSFLEX products adds enormous flexibility in the design and installation of professional A/V systems.
Features:
Converts Two Dante Network Audio Signals to Left/Right Digital Audio
The SF-NH1 is a headphone amplifier that converts two Dante network audio channels to a stereo headphone output with front-panel level adjustment.
The SF-NH1 is a headphone amplifier that converts two Dante network audio channels to a stereo headphone output with front-panel level adjustment. The output connects through a stereo 3.5 mm Mini-jack. Each channel provides 100 mW into 100 ohms for a network digital audio level of 0 dBFS. Special software is not required to configure the module. The SF-NH1 is a professional grade product for studio quality fidelity and low noise performance.
The SF-NH1 is PoE powered. Valid PoE power and synchronization to the Dante network is indicated by a green LED visible from the front of the unit.
The SF-NH1 is constructed in a durable, professional all-metal enclosure suitable for free-standing, surface-mounted or rack-mounted operation. This full-featured SYSFLEX product is engineered and manufactured in the U.S.A for continuous duty in demanding installations. The versatility of SYSFLEX products adds enormous flexibility in the design and installation of professional A/V systems.
Features:
Converts Two Dante Network Audio Signals to a Stereo Headphone
Output on Professional Quality 3.5 mm stereo MINI Jack
The SF-NL2 is a line-level interface that converts two Dante network audio channels to two balanced audio outputs on XLR connectors.
The SF-NL2 is a line-level interface that converts two Dante network audio channels to two balanced audio outputs on XLR connectors. Each channel provides +4 dBu balanced for a network digital audio level of -20 dBFS. Each output is equipped with a selector to set the output to line level or attenuate the output by 50 dB to mic level. Special software is not required to configure the module. The SF-NL2 is a professional grade product for studio quality fidelity and low noise performance.
The SF-NL2 is PoE powered. Valid PoE power and synchronization to the Dante network is indicated by a green LED visible from the front of the unit.
The SF-NL2 is constructed in a durable, professional all-metal enclosure suitable for free-standing, surface-mounted or rack-mounted operation. This full-featured SYSFLEX product is engineered and manufactured in the U.S.A for continuous duty in demanding installations. The versatility of SYSFLEX products adds enormous flexibility in the design and installation of professional A/V systems.
Features:
Converts Two Dante Network Audio Signals to Balanced Analog
The SF-NP40D is an audio power amplifier that converts two Dante network audio channels to two 4 Ohm or 8 Ohms amplified outputs.
The SF-NP40D is an audio power amplifier that converts two Dante network audio channels to two 4 Ohm or 8 Ohms amplified outputs. Each output provides 20 watts into 8 ohms for a network digital audio level of 0 dBFS. Special software is not required to configure the module.
A front-panel blue LED illuminates when the SF-NP40D is powered from its included external 24 Vdc power supply. The module is equipped with both thermal and output short-circuit protection. The high-efficiency Class D output stages produce minimal heat for all levels of expected voice or music modulation. Valid synchronization to the Dante network is indicated by a green LED visible from the front of the unit.
The SF-NP40D is constructed in a durable, professional all-metal enclosure suitable for free-standing, surface-mounted or rack-mounted operation. This full-featured SYSFLEX product is engineered and manufactured in the U.S.A for continuous duty in demanding installations. The versatility of SYSFLEX products adds enormous flexibility in the design and installation of professional A/V systems.
Features:
Converts Two Dante Network Audio Signals to two 20 W Outputs into 8 Ohms
The SF-UN1 is a digital audio interface that converts a USB stereo digital audio source to two Dante network audio channels.
The SF-UN1 is a digital audio interface that converts a USB stereo digital audio source to two Dante network audio channels. The SF-UN1 automatically detects a valid USB input. The input is decoded, re-clocked and transmitted to the Dante network. The module provides automatic sample rate conversion from the USB input to the Dante network. Special software is not required to configure the module. The SF-UN1 is a professional grade product for studio quality performance.
The SF-UN1 is PoE powered. Valid PoE power and synchronization to the Dante network is indicated by a green LED visible from the front of the unit.
The SF-UN1 is constructed in a durable, professional all-metal enclosure suitable for free-standing, surface-mounted or rack-mounted operation. This full-featured SYSFLEX product is engineered and manufactured in the U.S.A for continuous duty in demanding installations. The versatility of SYSFLEX products adds enormous flexibility in the design and installation of professional A/V systems.
Features:
Converts Left and Right USB Audio Channels to two Dante Network Channels
Supports USB Input Sampling Rates of 32 kHz, 44.1 kHz and 48 kHz
The SF-XMN4 is an interface that converts four XLR microphone inputs to Dante network audio channels.
The SF-XMN4 is an interface that converts four XLR microphone inputs to Dante network audio channels. Special software is not required to configure the SF-XMN4. Each XLR input is equipped with a switch to set the gain for dynamic or condenser microphones. A dual-LED VU meter displays the level for each input to facilitate selection of the ideal gain range. P48 phantom voltage is supplied to each microphone input. The SF-XMN4 is a professional grade product with discrete mic preamplifiers for studio quality fidelity and low noise performance.
The SF-XMN4 is PoE powered. Valid PoE power and synchronization to the Dante network is indicated by a green LED visible from the front of the unit.
The SF-XMN4 is constructed in a durable, professional all-metal enclosure suitable for free-standing, surface-mounted or rack-mounted operation. This full-featured SYSFLEX product is engineered and manufactured in the U.S.A for continuous duty in demanding installations. The versatility of SYSFLEX products adds enormous flexibility in the design and installation of professional A/V systems.
Features:
Dante Network Interface for Four Audio Mic Inputs
Each XLR Input Provides Switch-Selectable Mic Gain: 40 dB, 48 dB or 62 dB
48 V Mic Phantom (P48) on each input
Four XLR Front-Panel Inputs
Converts Four Standard XLR Mic or Line Audio Sources to Dante Network Channels
Special Software Not Required for Module Setup
High Resolution 24 Bit Analog to Digital Conversion
LED Indicator for Valid Power and Network Sync
Operation from PoE Power (Class 0, IEEE 802.3af)
Equipped for SysFlex™ Rack Mounting or Surface Mounting
RidePlayer provides an elegant solution to many of the unique challenges encountered with implementing vehicle-based (“on-board”) audio and show control for themed attractions.
RidePlayer provides an elegant solution to many of the unique challenges encountered with implementing vehicle-based (“on-board”) audio and show control for themed attractions.
The most significant of those challenges is the ability to precisely synchronize on-board audio with wayside audio, video, lighting, animatronics, etc. RidePlayer accomplishes this by providing a state-of-the-art synchronization system that can use one of several methods to maintain lock between on-board and wayside systems. Those methods include GPS (which can be distributed with repeaters for indoor applications), SMPTE (which can be transmitted wirelessly), Video Genlock, and IEEE-1588 (CIP Sync).
Another significant challenge is the ability to trigger and monitor important sub-systems like animation controllers, PLCs, RFID scanners, and other miscellaneous equipment. RidePlayer overcomes this challenge by integrating the power of Alcorn McBride V-Series control into the same hardware platform. This means the capability to interface to just about any device including PLCs, animation controllers, sensors, lighting systems, video servers, and our ShowTouch panels.
Of course, the primary purpose of this device is to provide high-quality audio playback so it has a wide-range of features to suit that requirement well. It will be capable of sourcing up to 16 outputs of 24-bit 96kHz uncompressed audio with the ability to route, mix, and crossfade between tracks. At 24-bit 96kHz, each output will have up to 4 layers of polyphonic playback capability.
The IPD-RS82-EZ is an 8" open-ceiling speaker.
The IPD-RS82-EZ is an 8" open-ceiling speaker. Dante®-addressable coaxial pendant speaker incorporates ne 203 mm (8.0 in.) coaxial driver with BroadBeam Ring™ technology for consistently smooth high frequency. Low latency digital audio, power, and control are delivered to the speaker via standard category cable; connection is made on the other end to the STNet-Switch or other PoE / PoE+ switch. May also be powered via a 24V DC barrel connector for non-PoE installations. Configuration and zoning of the speaker are accomplished via software. Includes hanging hardware with galvanized steel cables and hanging bracket for fast, easy and secure installation. Unit may be hung or mounted direct-to-conduit via locking cover plate.
The IPD-RS62-EZ is a 6.5" open-ceiling speaker.
The IPD-RS82-EZ is a 6.5" open-ceiling speaker. Dante®-addressable coaxial pendant speaker incorporates one 6.5 inch (165 mm) coaxial driver with BroadBeam Ring™ technology for consistently smooth high frequency. Low latency digital audio, power, and control are delivered to the speaker via standard category cable; connection is made on the other end to the STNet-Switch or other PoE / PoE+ switch. May also be powered via a 24V DC barrel connector for non-PoE installations. Configuration and zoning of the speaker are accomplished via software. Includes hanging hardware with galvanized steel cables and hanging bracket for fast, easy and secure installation. Unit may be hung or mounted direct-to-conduit via locking cover plate. Enclosure constructed of injection molded ABS with glasber reinforcement for lasting durability in indoor or outdoor applications.
The AMK DT84-B A loudspeaker is powered by a POE+ network amplifier with Dante™ input.
The AMK DT84-B A loudspeaker is powered by a POE+ network amplifier with Dante™ input. It is a 2x2 lay in grille speaker system for easy ceiling tile installation. No external power supply is required. The speaker system has a Class D amplifier which provides efficient use of power. The assembly comes with AMK's CX 802, highly efficient coaxial loudspeaker. This system will solve the issue of having to provide a separate amplifier or I/O interface for speaker installations.
The two network speakers can broadcast two different programs under separate channels.
The CX802 loudspeaker driver has excellent dispersion, wide bandwidth and a smooth frequency response which makes this the top choice for today’s overhead commercial applications.
This assembly can be used in wide range of projects for paging and background music applications. The DT84-B is ideal for hotels, education, hospitals, retail stores, performing art centers, restaurants, airports, houses of worship, and board rooms. The end users will appreciate both the sound and visual quality of these speakers.
The HTX-TC1 topology reduces the 10G Ethernet switch port count per node by 50%, thanks to Simultaneous/Full Duplex operation on a single 10G Link!
The HTX-TC1 topology reduces the 10G Ethernet switch port count per node by 50%, thanks to Simultaneous/Full Duplex operation on a single 10G Link! No longer do you need separate transmit and receive network connections. The HT Series is the most complete in-room solution ever created increasing capabilities while reducing costs and complexity. The HTX-TC1 has the lowest 10G Ethernet switch port cost due to its ability to transmit and receive full bandwidth in both directions on a single port. Typical AV over IP systems utilize two ports, one for encoding and one for decoding. The HTX-TC1 would only require a 24-port switch compared to the usual 48 of current solutions.
Simultaneous Encode/Decode on Single 10G Link
HDBaseT-IP Core Technology
Zero Frame Latency Scaling
4K60 4:4:4 & HDR 18Gbps
HDMI® 2.0/HDCP 2.2 In/Out
HDBaseT™ 2.0 Transmit & Receive HDBaseT™ 100m (330ft) with Unshielded Cable
Seamless & Full Break-away Switching
10G SFP+ (Fiber) & 10G PoE+ RJ-45 (Copper)
Audio DSP & Dante™/AES67 Options 2 or 8 Channel
USB 2.0 Host/Device with Selectable Direction
Audio Embedders & De-Embedders, Digital Recorders & Players
APB-D200 R-D features Analogue and DANTE inputs with high-quality digital-to analogue converters, supporting a range of sample rates and bit depths.
APB-D200 R-D features Analogue and DANTE inputs with high-quality digital-to analogue converters, supporting a range of sample rates and bit depths. It can provide a hardware master clock for a Dante network. As with other Dante products, the freely available Dante Controller software application is used to automatically discover and configure APB-Dante devices connected to the Dante network. Device names, channel labels, signal routing and other parameters (for example, sample rate and latency) can be configured via the network using Dante Controller. A variety of network and clock synchronisation diagnostic tools are also available in Dante Controller.
APB-Dante products use Power over Ethernet (PoE). Power can be provided through the Ethernet cable from a PoE-capable network switch, or from a separate PoE injector.
Third party applications that use Dante Ready™ allow customers to purchase and activate Dante audio channels after installation using the Dante Activator tool in Dante Controller 4.5 or higher. Dante Activator is tied to an active Audinate user account and accepts standard credit card payments.
