Dante-enabled Product Catalog

Blocks are designed for:

connecting analog or digital AES3 audio signals to sound studios and audio mixers using the AES67 or Dante protocol;

transmission of audio signals over Ethernet 100/1000 BaseT;

performing the function of an 8x8 audio switch and creating a distributed network of switches with a common switching field, limited network bandwidth (one audio channel takes about 1 Mbps).

Supports up to 16 channels of balanced analog audio (8 inputs and 8 outputs) or up to 8 channels of AES 3

digital audio (4 inputs and 4 outputs). The type of audio signals (' xxxx ') for inputs and outputs is selected by the user in the device code independently of each other. The first pair of ' xx ' defines the input signals and the second pair of ' xx ' the output signals (' A ' indicates 2 analog stereo signals; ' E ' indicates 2 AES digital signals ). An additional Ethernet port provides connection to a redundant ( Redundant )) audio transmission networks or device cascading. Management and monitoring is carried out over an Ethernet network using a proprietary program Dante Controller . HDB44 audio connectors.

A pair of PBX series devices allows you to implement transmission over a single fiber:

up to 4 x 12 G /3G/HD-SD SDI, ASI signals

AoIP (4 channels of audio, two inputs and two outputs on each side), Dante / AES 67 protocol , Primary / Secondary ports

The Audio to IP Converter ( AoIP ) is designed to connect microphone or line analog audio signals to local Ethernet transmission networks using the Dante protocol or the AES67 standard , for intercom over IP networks and / or for switching audio signals in a network.

An additional Ethernet port provides connection to a secondary ( Secondary ) audio transmission network, and can also be used for cascading devices (Switched).

There are two versions of the device:

models with transport up to 3 G SDI

models with transport up to 12 G SDI ( index -12 G in device code)

To transmit signals over a single fiber, the principle of CWDM (wavelength division) is used in the range of 1470 nm :1570 nm or 1270nm:1410 nm (index ' H ' in the block code). This allows you to organize both one-way and two-way video transmission.

The optical expansion port UPGRADE (1310 nm ) allows the transmission of additional signals transmitted at wavelengths of 1260nm: 1450 nm .

Thus, by connecting through the UPGRADE expansion port the second body ' P roBox ', operating at wavelengths of 1270nm:1410 nm (index ' L' in the block code), it is possible to transmit 8 3G / HD-SD SDI, ASI signals plus implement two independent AoIP lines through one fiber.

Power is supplied from an external adapter 12 V@1000 mA.

The devices are designed for:

- connection of analog or digital audio signals in AES 3 format to the local audio transmission network ( AoIP ) using AES 67, Dante protocol ;

- connection of microphones to the local audio transmission network ( AoIP ) via AES 67, Dante protocol ;

- audio data exchange between Ethernet Dante , AES 67 and 3 G / HD / SD SDI digital video signals (devices with index ' V '); - creation of a distributed network of audio switches with a common switching field; - transfers

Ethernet ( AES 67, Dante ) over optical links;

- indication of audio signal levels ( PEAI -9090, PEAI -9091).

Ethernet Dante audio interfaces , AES 67 support:

- 8 in, 8 out ( PEAI -9088, PEAI -9090) and 16 in, 16 out ( PEAI -9091) balanced analog audio

or 4 in, 4 out ( PEAI -9088, PEAI -9090) and 8 in, 8 out ( PEAI -9091) AES 3 digital audio channels .

Devices with suffix ' V ' contain a 4-channel audio communication module between Ethernet Dante , AES 67 and 3G / HD / SD SDI digital video signals . The devices have an SDI input and two SDI outputs . Up to 16 audio channels of SDI embedded audio are supported .

Devices with suffix ' R ' contain an AES 3 digital audio input/output module with support for User Bits and Channel Bits (compatible with Riedel intercom equipment ).

The PEAI -9090 and PEAI -9091 devices can be equipped with submodules with microphone inputs (suffix ' M ' in code). This provides a voltage supply of '+48 V ' to the microphones and control of the gain of signals from the microphones.

The front panel of the PEAI -9090 and PEAI -9091 has a display that shows indicators for input and output signals.

The type of audio signals for inputs and outputs, independently of each other, is selected by the User (should be reflected in the device code).

The devices have two electrical Ethernet 100/1000 BaseT ports - primary ( Primary ) and backup ( Secondary ) and one optical (except for PEAI -9091). A redundant electrical Ethernet port provides connection to a redundant audio transmission network or device cascading. The presence of an optical transmission line through a separate SFP module allows you to transmit Ethernet ( AES 67, Dante ) over optical communication lines over long distances

( Ethernet SFP module not included in the device; see section 'SFP modules optical and electrical', section II , pos. 1.1:1.6).

Management and monitoring are carried out over the Ethernet network using the proprietary Dante Controller program and via the WEB interface.

Separate power inputs for main and backup power supply. 'Hot' replacement of power supplies.

Audio connectors DB 25 and RJ 45 (on module ' R ').

The devices are designed for:

- connection of analog or digital audio signals in AES 3 format to the local audio transmission network ( AoIP ) using AES 67, Dante protocol ;

- connection of microphones to the local audio transmission network ( AoIP ) via AES 67, Dante protocol ;

- audio data exchange between Ethernet Dante , AES 67 and 3 G / HD / SD SDI digital video signals (devices with index ' V '); - creation of a distributed network of audio switches with a common switching field; - transfers

Ethernet ( AES 67, Dante ) over optical links;

- indication of audio signal levels ( PEAI -9090, PEAI -9091).

Ethernet Dante audio interfaces , AES 67 support:

- 8 in, 8 out ( PEAI -9088, PEAI -9090) and 16 in, 16 out ( PEAI -9091) balanced analog audio

or 4 in, 4 out ( PEAI -9088, PEAI -9090) and 8 in, 8 out ( PEAI -9091) AES 3 digital audio channels .

Devices with suffix ' V ' contain a 4-channel audio communication module between Ethernet Dante , AES 67 and 3G / HD / SD SDI digital video signals . The devices have an SDI input and two SDI outputs . Up to 16 audio channels of SDI embedded audio are supported .

Devices with suffix ' R ' contain an AES 3 digital audio input/output module with support for User Bits and Channel Bits (compatible with Riedel intercom equipment ).

The PEAI -9090 and PEAI -9091 devices can be equipped with submodules with microphone inputs (suffix ' M ' in code). This provides a voltage supply of '+48 V ' to the microphones and control of the gain of signals from the microphones.

The front panel of the PEAI -9090 and PEAI -9091 has a display that shows indicators for input and output signals.

The type of audio signals for inputs and outputs, independently of each other, is selected by the User (should be reflected in the device code).

The devices have two electrical Ethernet 100/1000 BaseT ports - primary ( Primary ) and backup ( Secondary ) and one optical (except for PEAI -9091). A redundant electrical Ethernet port provides connection to a redundant audio transmission network or device cascading. The presence of an optical transmission line through a separate SFP module allows you to transmit Ethernet ( AES 67, Dante ) over optical communication lines over long distances

( Ethernet SFP module not included in the device; see section 'SFP modules optical and electrical', section II , pos. 1.1:1.6).

Management and monitoring are carried out over the Ethernet network using the proprietary Dante Controller program and via the WEB interface.

Separate power inputs for main and backup power supply. 'Hot' replacement of power supplies.

Audio connectors DB 25 and RJ 45 (on module ' R ').

PEAI-9088 provides for analog or AES3 digital audio transmission over local network (AoIP) via Dante or AES67 protocol. 100/1000Mbps Ethernet supported. Up to sixteen analog (balanced) audio channels (8 in, 8 out) or eight AES3 signals (4 in, 4 out). Audio formats supported are denoted by the XXYY model index: XX designate the input format (A - analog stereo pair, E - two AES3 channels), YY designate the outputs formats in the same way. Auxiliary Ethernet port provides redundant network connectivity. Capability of Ethernet SFP provides an optical connectivity (SFP module sold separately). Configuration and monitoring is made with a dedicated Dante Controller software package over Ethernet. Separate mains connectors for the main and stand-by PSUs. Hot-swappable PSU.

The Profitt PBX-AE-101-x provides for analog or AES3 digital audio transmission over local network (AoIP) via Dante or AES67 protocol.  The Profitt PBX-AE-101-x provides for analog or AES3 digital audio transmission over local network (AoIP) via Dante or AES67 protocol. 100/1000Mbps Ethernet supported. Transmission of four audio channels and one channel of InterCom. Configurable as a 4-channel transmitter (receiver) or a two-channel bidirectional link. Depending on a model (index “A”) supports 4 analog audio channels or (index “E”) 2 channels of AES3 audio. Auxiliary Ethernet port provides redundant network connectivity or cascading of devices. Capability of Ethernet SFP provides an optical connectivity (SFP module sold separately). Configuration and monitoring is made with a dedicated Dante Controller software package over Ethernet