Profitt - PBX-AE-101-X

Profitt – PBX-AE-101-X

Product Information

The Profitt PBX-AE-101-x provides for analog or AES3 digital audio transmission over local network (AoIP) via Dante or AES67 protocol.

The Profitt PBX-AE-101-x provides for analog or AES3 digital audio transmission over local network (AoIP) via Dante or AES67 protocol. 100/1000Mbps Ethernet supported. Transmission of four audio channels and one channel of InterCom. Configurable as a 4-channel transmitter (receiver) or a two-channel bidirectional link. Depending on a model (index “A”) supports 4 analog audio channels or (index “E”) 2 channels of AES3 audio. Auxiliary Ethernet port provides redundant network connectivity or cascading of devices. Capability of Ethernet SFP provides an optical connectivity (SFP module sold separately). Configuration and monitoring is made with a dedicated Dante Controller software package over Ethernet

RM-X-64-DNT

Designed for modern broadcast, live production, and critical audio environments, the RM-X-64-DNT reference monitor range delivers uncompromising flexibility and reliability in a compact 1U form factor. As standard, the unit features seamless Dante AoIP and MADI integration, intuitive control, fast source selection, and full redundancy, serving as the monitoring backbone of any professional workflow. Product Features

128 channels, 64-channel Dante AoIP and 64-channel MADI.
2 expansion slots for additional sources.
Expansion source options:
- 8 Analogue input channels.
- 8 Stereo Digital inputs (16-channels).
- 12G-SDI inputs (up to 64-channels).
Built-in ported speakers with integrated grille.
Built-in microphone for talkback.
Digital & analogue XLR line out.
Full power and data redundancy.
AC and 12V DC power inputs.
Ambient light sensor.
Fully Dante compliant.
AES67 compatible.
Compact 1U design.
Depth less than 20.5cm (8 inches).

I/O Interfaces

Dante Ch: 64 In
16-bit, 24-bit, 32-bit

See the product

Lectrosonics

Lectrosonics – DNT22

The DNT22 I/O Interface is a 2-in / 2-out, cost-effective way to add up to two channels (in and out) of Dante™ audio to an existing Dante-based networked audio system. The DNT22’s small form factor and PoE power capability make it easy to put Dante connectivity wherever it’s needed - near the audio source or sink thereby eliminating costly and interference prone analog wiring.

I/O Interfaces

Dante Ch: 2x2
24-bit

See the product

AudioScience

AudioScience – Iyo Dante 16.0M

The Iyo Dante® is a cost-effective family of microphone/line Dante audio-over-IP (AoIP) interfaces in a 1U rack mount format. The 16.0M provides 16 balanced analog audio inputs with terminal block connectors

. Each input accommodates microphone through line level signals with a gain range of -60 to +24dBu. +48V phantom power is individually switchable on each input. With Terminal block termination.

RGB LEDs on the Iyo’s front panel show per channel audio levels and streaming status.

The Iyo family feature an embedded web server, allowing configuration and monitoring of input and output levels. Routing is achieved using the Dante Controller.

Power is provided from a built-in universal AC power supply. Redundant power is available using an external 12VDC supply via a locking 2.1mm jack.

All units can also be operated in Livewire+ AES67 interoperability mode.

I/O Interfaces

Dante Ch: 16x16
16-bit, 24-bit, 32-bit

See the product

Profitt – PBX-AE-101-X

Product Information

Similar Products

RM-X-64-DNT

Lectrosonics – DNT22

AudioScience – Iyo Dante 16.0M

Stay connected to Dante

Support

Company

Dante Networking Alliance