Dante-enabled Product Catalog

The Aurora (n) 24-DNT provides you with pro-quality digital conversion and ultra-low-latency performance. The Aurora (n) 24-DNT provides you with pro-quality digital conversion and ultra-low-latency performance. The Aurora (n) 24-DNT gives you up to 192kHz analog to digital and digital to analog conversion with front panel control of all routing and sample rate options. Word clock and MIDI I/O connectors provide you with additional sync options, and the preinstalled LT-DNT Dante card gives you maximum networking bandwidth, with minimal latency. Aurora (n) models give you up to 32-channel recording and playback to microSD for stand-alone operation or confidence recording, as well as two audiophile-grade headphone outs, while a TFT LCD display provides immediate status information. Leveraging high-end Lynx Hilo technology and utilizing cutting-edge FPGA processors, Aurora (n) delivers even greater transparency, with significantly lower noise and distortion than previous models.

The Aurora (n) 8-DNT provides you with pro-quality digital conversion and ultra-low-latency performance.  The Aurora (n) 8-DNT provides you with pro-quality digital conversion and ultra-low-latency performance. The Aurora (n) 8-DNT gives you up to 192kHz analog to digital and digital to analog conversion with front panel control of all routing and sample rate options. Word clock and MIDI I/O connectors provide you with additional sync options, and the preinstalled LT-DNT Dante card gives you maximum networking bandwidth, with minimal latency. Aurora (n) models give you up to 32-channel recording and playback to microSD for stand-alone operation or confidence recording, as well as two audiophile-grade headphone outs, while a TFT LCD display provides immediate status information. Leveraging high-end Lynx Hilo technology and utilizing cutting-edge FPGA processors, Aurora (n) delivers even greater transparency, with significantly lower noise and distortion than previous models.

The Aurora (n) 16-DNT provides you with pro-quality digital conversion and ultra-low-latency performance. The Aurora (n) 16-DNT provides you with pro-quality digital conversion and ultra-low-latency performance. The Aurora (n) 16-DNT gives you up to 192kHz analog to digital and digital to analog conversion with front panel control of all routing and sample rate options. Word clock and MIDI I/O connectors provide you with additional sync options, and the preinstalled LT-DNT Dante card gives you maximum networking bandwidth, with minimal latency. Aurora (n) models give you up to 32-channel recording and playback to microSD for stand-alone operation or confidence recording, as well as two audiophile-grade headphone outs, while a TFT LCD display provides immediate status information. Leveraging high-end Lynx Hilo technology and utilizing cutting-edge FPGA processors, Aurora (n) delivers even greater transparency, with significantly lower noise and distortion than previous models.

The Aurora (n) 32-DNT provides you with pro-quality digital conversion and ultra-low-latency performance.  The Aurora (n) 32-DNT provides you with pro-quality digital conversion and ultra-low-latency performance. The Aurora (n) 32-DNT gives you up to 192kHz analog to digital and digital to analog conversion with front panel control of all routing and sample rate options. Word clock and MIDI I/O connectors provide you with additional sync options, and the preinstalled LT-DNT Dante card gives you maximum networking bandwidth, with minimal latency. Aurora (n) models give you up to 32-channel recording and playback to microSD for stand-alone operation or confidence recording, as well as two audiophile-grade headphone outs, while a TFT LCD display provides immediate status information. Leveraging high-end Lynx Hilo technology and utilizing cutting-edge FPGA processors, Aurora (n) delivers even greater transparency, with significantly lower noise and distortion than previous models.

Studer’s Vista 1 Black Edition is an all-in-one mixing system that offers premium functionality at an affordable price. The flexible mix system combines Studer’s industry-leading control surface with advanced DSP, fully-configurable I/O, and redundant power supplies – all within a single, compact console. Studer’s Vista 1 Black Edition is an all-in-one mixing system that offers premium functionality at an affordable price. The flexible mix system combines Studer’s industry-leading control surface with advanced DSP, fully-configurable I/O, and redundant power supplies – all within a single, compact console. Because of its powerful feature set and flexible I/O configurations, the Vista 1 Black Edition can handle the widest range of applications, from OB and ENG vans, to small studios, to mobile productions where the console needs to be moved frequently. Ready for easy integration with AoIP networks and expandable via Studer’s D21m system and Compact Stage Boxes, the Vista 1 Black Edition is a cost-effective, future-proof console ready for anything that gets thrown its way.  

The Studer Micro Series is a budget-friendly, compact, all-in-one digital audio mixing system. Comprised of the core unit, graphical user interface, and optional fader control surface, the Micro Series delivers unprecedented value for a variety of applications. It features AoIP as standard, eight channels of DANTE I/O, and full control via standard web browsers. The Studer Micro Series is a budget-friendly, compact, all-in-one digital audio mixing system. Comprised of the core unit, graphical user interface, and optional fader control surface, the Micro Series delivers unprecedented value for a variety of applications. It features AoIP as standard, eight channels of DANTE I/O, and full control via standard web browsers. The Micro Series provides powerful features including AoIP, Lexicon effects processing, and VoiceMix automatic mixing. Since the core is browser based, there is no need to install specific software. Access is possible from any computer or tablet with a web browser, offering complete flexibility in the choice of hardware used. A single laptop or tablet can control multiple core units, and conversely, multiple devices can control a single core unit simultaneously. The Micro Series provides everything a facility needs in one box and is ideal for radio and TV broadcast, production studios, ENG/DSNG, and more.

The Studer Glacier Series is a highly customizable broadcast audio solution that provides comprehensive control, flexibility, and interoperability for any on-air application. It includes two easy-to-use control surfaces which streamline live operation. All other controls are provided virtually, via intuitive multi-touch graphical user interfaces.  The Studer Glacier Series is a highly customizable broadcast audio solution that provides comprehensive control, flexibility, and interoperability for any on-air application. It includes two easy-to-use control surfaces which streamline live operation. All other controls are provided virtually, via intuitive multi-touch graphical user interfaces. The multi-touch graphical user interface provides a virtualized control surface that allows users to customize controls to suit their needs, host comprehensive control interfaces for additional equipment, and simplify the studio environment. Each Glacier Series component offers forwards and backwards compatibility with Studer DSP platforms. Multiple modules can be added to create custom-tailored consoles that bring new levels of control and versatility to any broadcast.

Studer’s D23m Digital I/O System was developed for the Infinity Series large scale mixing consoles, but it also operates with SCore Live Vista mixing systems. D23m serves as a scalable, modular I/O frame providing cost-effective inputs and outputs with maximum flexibility while maintaining the well-known Studer sound quality. Studer’s D23m Digital I/O System was developed for the Infinity Series large scale mixing consoles, but it also operates with SCore Live Vista mixing systems. D23m serves as a scalable, modular I/O frame providing cost-effective inputs and outputs with maximum flexibility while maintaining the well-known Studer sound quality. D23m can host up to 12 I/O cards with a total of 1,536 inputs and 1,536 outputs (dependant on the I/O cards fitted). When used as a small stand alone router, the D23m frame provides a huge I/O Matrix of 3,072 x 3,072 inputs and outputs. The new D23m I/O system comes with two A-Link ports and two hot swappable power supplies for secure, redundant operation. 

RAM Audio V12044 (W12044) is a four channels amplifier able to deliver 12000 W into 4 Ohm equipped with advanced FIR DSP, complete monitoring and control via proprietary OCS System and Dante digital audio networking. RAM Audio V12044 (W12044) is a heavy duty audio power amplifier equipped with PFC QuantaPulse Regulated Dual SMPS to fulfil the most exigent applications. This four channels amp delivers 12000 W into 4 Ohm comprising a complete set of useful features such as digital control and monitoring with an extra-large LCD display, on board advanced FIR DSP, USB or Ethernet connection for full monitoring and control via OCS System, digital AES3 inputs and featuring Dante digital audio networking.

RAM Audio V12004 (W12004) is a four channels amplifier able to deliver 12000 W into 2 Ohm equipped with advanced FIR DSP, complete monitoring and control via proprietary OCS System and Dante digital audio networking. RAM Audio V12004 (W12004) is a heavy duty audio power amplifier equipped with PFC QuantaPulse Regulated Dual SMPS to fulfil the most exigent applications. This four channels amp delivers 12000 W into 2 Ohm comprising a complete set of useful features such as digital control and monitoring with an extra-large LCD display, on board advanced FIR DSP, USB or Ethernet connection for full monitoring and control via OCS System, digital AES3 inputs and featuring Dante digital audio networking.

RAM Audio V9044 (W9044) is a four channels amplifier able to deliver 9000 W into 4 Ohm equipped with advanced FIR DSP, complete monitoring and control via proprietary OCS System and Dante digital audio networking. RAM Audio V9044 (W9044) is a heavy duty audio power amplifier equipped with PFC QuantaPulse Regulated Dual SMPS to fulfil the most exigent applications. This four channels amp delivers 9000 W into 4 Ohm comprising a complete set of useful features such as digital control and monitoring with an extra-large LCD display, on board advanced FIR DSP, USB or Ethernet connection for full monitoring and control via OCS System, digital AES3 inputs and featuring Dante digital audio networking.

RAM Audio V9004 (W9004) is a four channels amplifier able to deliver 9000 W into 2 Ohm equipped with advanced FIR DSP, complete monitoring and control via proprietary OCS System and Dante digital audio networking. RAM Audio V9004 (W9004) is a heavy duty audio power amplifier equipped with PFC QuantaPulse Regulated Dual SMPS to fulfil the most exigent applications. This amp delivers 9000 W into 2 Ohm comprising a complete set of useful features such as digital control and monitoring with an extra-large LCD display, on board advanced FIR DSP, USB or Ethernet connection for full monitoring and control via OCS System, digital AES3 inputs and featuring Dante digital audio networking.

64 In / 64 Out Thunderbolt™ 2 and Pro Tools | HD™ compatible audio interface, with Dante networking audio connectivity. 64 In / 64 Out Thunderbolt™ 2 and Pro Tools | HD™ compatible audio interface, with Dante networking audio connectivity. Red 8Pre features both Thunderbolt 2 connectivity and dual mini-DigiLink ports allowing you the best of both Core Audio and Pro Tools|HD workflows. Take Red 8Pre on the road for location recording over Thunderbolt then connect the same interface to Pro Tools|HDX or Pro Tools|HD Native back at the studio for mixdown. The combination of low-latency conversion and driver technology allows real-time foldback mixes to be created in the DAW while you continue to use your native plug-ins. Unlike many interfaces, both mini-DigiLink and Thunderbolt 2 connectivity comes as standard, so there’s no need to buy an additional option card.

The hs-221 is a dual 21 inch ACM subwoofer system. The hs-221 utilizes VUE’s revolutionary Active Compliance Management (ACM) technology to reset the size-toperformance benchmark for subwoofer systems. The combination of ACM technology and the hs-221’s highly sophisticated on-board electronics result in massive amounts of pure, clean low-frequency energy from a dual 21-inch configuration that embodies a significantly smaller enclosure than other dual 21-inch designs.  The hs-221 is a dual 21 inch ACM subwoofer system. The hs-221 utilizes VUE’s revolutionary Active Compliance Management (ACM) technology to reset the size-toperformance benchmark for subwoofer systems. The combination of ACM technology and the hs-221’s highly sophisticated on-board electronics result in massive amounts of pure, clean low-frequency energy from a dual 21-inch configuration that embodies a significantly smaller enclosure than other dual 21-inch designs. 

• Ideal for Large Format Touring, Dance Clubs, and EDM Events
• 143 dB SPL peak output in free field (149 db SPL half space environment – ground plane)
• Flat Response down to 25 Hz in ELF (Extended Low Frequency Mode)

ACTIVE COMPLIANCE MANAGEMENT (ACM™) Patent-pending hybrid design combines both band-pass and vented alignments into a single, compact footprint for more output and definition. ABUNDANCE OF HORSEPOWER Onboard amplifier supplies 1000W pure sine wave power (2500W “peak” power) to each woofer. PURPOSE-DESIGNED TRANSDUCERS Dual 21-inch, long-excursion woofers with 5-inch (125 mm) voice coils. SYSTEMVUE™ SOFTWARE Mac, Windows and iOS compatible software provides access to monitor and control parameters such as fully parametric EQ, input/output levels, volume, mute, delay and input sources. STANDARD IP FOR EASY NETWORKING ON-BOARD Simply plug in, and the system automatically connects to virtually any kind of IP configuration. BUILT FOR THE ROAD Premium birch plywood enclosure with extensive internal bracing and a highly-durable Dura Coat finish.  hs-221’s are equipped with two RJ-45 Ethernet connectors (with an internal switch for loop through network connections). The hs-221 supports remote control and monitoring over ethernet via SystemVUE software. The Ethernet connection also can be used for Dante audio input.

The Extron AXI 22 AT is a quarter rack width audio interface for integrating two mic/line sources onto a Dante™-enabled audio system. The Extron AXI 22 AT is a quarter rack width audio interface for integrating two mic/line sources onto a Dante™-enabled audio system. It features two mic or line inputs on a 3.5 mm captive screw connector, with switchable 48 volt phantom power. Input select, gain, and phantom power settings are controllable from the front panel, via DSP Configurator Software, or by SIS command. The AXI 22 AT also features two line level outputs for routing any two Dante channels from the network to the audio system. The AXI 22 AT interfaces with any Dante-equipped audio processor,  and can be powered through PoE.

The Extron AXI 44 AT is a quarter rack width audio interface for integrating four mic/line sources onto a Dante™-enabled audio system.  The Extron AXI 44 AT is a quarter rack width audio interface for integrating four mic/line sources onto a Dante™-enabled audio system. It features four mic or line inputs on 3.5 mm captive screw connectors, with switchable 48 volt phantom power. Input select, gain, and phantom power settings are controllable from the front panel, via DSP Configurator Software, or by SIS command. The AXI 44 AT also features four line level outputs for routing any four Dante channels from the network to the audio system. The AXI 44 AT interfaces with any Dante-equipped audio processor, and can be powered via PoE.

The NBB-1616 is a fully digitized 16 x 16 Break-in/Break-out box which bidirectionally streams multi-channel audio throughout off-the-shelf Ethernet cables and switches. The NBB-1616 is designed to be operated friendly and installed easily as well as system scalable and upgradable. The NBB-1616 is a fully digitized 16 x 16 Break-in/Break-out box which bidirectionally streams multi-channel audio throughout off-the-shelf Ethernet cables and switches. The NBB-1616 is designed to be operated friendly and installed easily as well as system scalable and upgradable. The front panel features 16 clip-hold PPM meters for all the input or output channels. And you can control audio and phantom power engagement for all the input locally on the front panel.

The ML 12 D is a self-Powered Subwoofer with built-in 24/96 DSP, Analog, AES3 and Dante I/O. The ML 12 D is a self-Powered Subwoofer with built-in 24/96 DSP, Analog, AES3 and Dante I/O.  In addition to legendary Amadeus reliability and sonic excellence, ML 12 D incorporates a newly refined Dante I/O section, offering options for full integration with leading third-party networking.

The ML 15 D is a self-powered subwoofer with built-in 24/96 DSP, Analog, AES3 and Dante I/O. The ML 15 D is a self-powered subwoofer with built-in 24/96 DSP, Analog, AES3 and Dante I/O. In addition to legendary Amadeus reliability and sonic excellence, ML 15 D incorporates a newly refined Dante I/O section, offering options for full integration with leading third-party networking.

The ML 18 D is a self-powered subwoofer with built-in 24/96 DSP, Analog, AES3 and Dante I/O. The ML 18 D is a self-powered subwoofer with built-in 24/96 DSP, Analog, AES3 and Dante I/O. In addition to legendary Amadeus reliability and sonic excellence, ML 18 D incorporates a newly refined Dante I/O section, offering options for full integration with leading third-party networking.

The Digital 6000 is Sennheiser's first digital two channel solution in one rack. Digital 6000 features Digital 9000’s unparalleled long range transmission mode, coupled with a massive 244 MHz of switching bandwidth.  The Digital 6000 is Sennheiser's first digital two channel solution in one rack. Digital 6000 features Digital 9000’s unparalleled long range transmission mode, coupled with a massive 244 MHz of switching bandwidth. The innovative user interface makes it easier to use. Sennheiser’s True Bit Diversity and predictive algorithms create a reliable wireless link which remains stable when other systems fail. The Digital 6000 components:

• EM 6000
• SK 6000
• L 6000
• SKM 6000

The NT110 is a portable digital audio mixer with inherited reliability and features of the NT880, TAMURA’s Flagship model. The NT110 is a portable digital audio mixer with inherited reliability & features of the NT880, TAMURA’s Flagship model.

• Analog 16 Input/Output (MONO), AES 2 Input/Output (STEREO), & AUX 2 (STEREO) as standard
• Audio formats such as AES, MADI, SDI, DANTE can be linked with NT016 via 2 expansion slots (optional)
• External Remote Control for Input/Output can be achieved via GPIO cards installed in the expansion slots for various applications
• Compact design mountable in a EIA 19 inch width rack
• Sampling Frequency;48K/96KHz, selectable for High-quality audio program production
• Availability of Power redundancy which is a prime requirement for live broadcasting events for the highest reliability
• Audio digital signal processing redundancy despite of the size of portable mixer. (option)

The cutting-edge PPA T45 NET D transmitter offers control or monitoring capability from any remote location, Dante™ input, multiple digital audio input options, and an OLED high-resolution screen with easy-to-manage menu navigation.  The cutting-edge PPA T45 NET D transmitter offers control or monitoring capability from any remote location, Dante™ input, multiple digital audio input options, and an OLED high-resolution screen with easy-to-manage menu navigation. Features 3 powerful microprocessors and the same high-quality audio and RF performance you’ve come to expect from Williams Sound. It’s technology that takes the guesswork out of complex audio installation. Simply select among voice, music, or hearing assistance in the application preset menu, and this transmitter quickly configures itself. With a range of up to 1000 feet, the PPA T45NET D is ideal for large venues where superior coverage is essential. System includes: PPA T45NET D transmitter (1) ANT 025 antenna (1) TFP 048 power supply (1) WLC 004 Main Power Cord (U.S.) (1) WCA 013 RCA Audio Cable, 3ft. *All items can be purchased separately

The Digi-Loop’s amplifier design offers dual 12 A rms loop outputs for perimeter loop(s), single array(s), dual loop, or phased-array configuration. A 70-100 V input provides connection to a distributed speaker/paging system, ensuring announcements are heard by loop users. Digi-Loop is definitely state-of-the-art – the first of its kind to maximize modern amplifier technology. Its network-control capability provides seamless, remote system set-up, operation and monitoring via laptop or tablet. DSP audio processing offers flexible, powerful software control of mixing, equalization, compression and more. Powerful Class D, pulse-width amplifiers maximize efficiency. The Digi-Loop’s amplifier design offers dual 12 A rms loop outputs for perimeter loop(s), single array(s), dual loop, or phased-array configuration. A 70-100 V input provides connection to a distributed speaker/paging system, ensuring announcements are heard by loop users. System includes: (1) DL 210 NET D 2.0 Loop Amplifier (1) WLC 004 Line Cord (US) (1) IDP 009 ADA Wall Plaque (t-coil)

The Digi-Loop’s amplifier design offers either single or dual 9.5 A rms loop outputs for perimeter loop(s), single array(s), dual loop, or phased-array configuration. A 70-100 V input provides connection to a distributed speaker/paging system, ensuring announcements are heard by loop users.   Digi-Loop is definitely state-of-the-art – the first of its kind to maximize modern amplifier technology. Its network-control capability provides seamless, remote system set-up, operation and monitoring via laptop or tablet. DSP audio processing offers flexible, powerful software control of mixing, equalization, compression and more. Powerful Class D, pulse-width amplifiers maximize efficiency. The Digi-Loop’s amplifier design offers either single or dual 9.5 A rms loop outputs for perimeter loop(s), single array(s), dual loop, or phased-array configuration. A 70-100 V input provides connection to a distributed speaker/paging system, ensuring announcements are heard by loop users. system includes (1) PLA DL207 NET D Loop Amplifier (1) WLC 004 Line Cord (US) (1) IDP 009 ADA Wall Plaque (t-coil)

The Digi-Loop’s amplifier design offers either single or dual 9.5 A rms loop outputs for perimeter loop(s), single array(s), dual loop, or phased-array configuration. A 70-100 V input provides connection to a distributed speaker/paging system, ensuring announcements are heard by loop users. Digi-Loop is definitely state-of-the-art – the first of its kind to maximize modern amplifier technology. Its network-control capability provides seamless, remote system set-up, operation and monitoring via laptop or tablet. DSP audio processing offers flexible, powerful software control of mixing, equalization, compression and more. Powerful Class D, pulse-width amplifiers maximize efficiency. The Digi-Loop’s amplifier design offers either single or dual 9.5 A rms loop outputs for perimeter loop(s), single array(s), dual loop, or phased-array configuration. A 70-100 V input provides connection to a distributed speaker/paging system, ensuring announcements are heard by loop users. system includes (1) PLA DL107 NET D Loop Amplifier (1) WLC 004 Line Cord (US) (1) IDP 009 ADA Wall Plaque (t-coil)

Rack-mountable 16-port 40W PoE switch for use with SoundTube's Dante-enabled in-ceiling and surface-mount speakers. The STNet-Switch is a 16-port, 40 watt PoE switch designed for use with SoundTube's Dante-enabled speakers. (The speakers may also be used with a standard PoE or PoE Plus switch.) The STNet-Switch provides 40 watts Power over Ethernet to each SoundTube speaker on the network and manages report-back information from the speakers. A Dante system controller DSP is connected to the STNet-Switch via one of the two provided gigabit Ethernet ports; up to 16 speakers may be connected directly via one switch. Multiple switches may be linked via the second gigabit Ethernet port