The AMK DT64-C loudspeaker is powered by a POE+ network amplifier with Dante™ input. It is a 2x2 lay in grille speaker system for easy ceiling tile installation. No external power supply is required.
The AMK DT64-C loudspeaker is powered by a POE+ network amplifier with Dante™ input. It is a 2x2 lay in grille speaker system for easy ceiling tile installation. No external power supply is required
The active, electronically inclinable DLI-130 DAN line source speaker enables intelligent and target-oriented sound coverage in venues that have the most difficult acoustic conditions. Using intuitive software, both the vertical dispersion characteristics and the inclination angle of the loudspeaker beam can be precisely adjusted – in real time – to perfectly suit to the room’s acoustic situation.
The Linea Focus DLI-130 DAN is a high performance line source system, which can be electronically controlled and monitored. The system is equipped with eight state-of-the-art Class D amplifiers and DSP technology specially developed for this area of application, plus eight coated 4” long excursion drivers. This perfect balance of amplifier-, digital signal processor- and loudspeaker technology enables a maximum SPL of 124 dB to be achieved. The DLI-130 DAN comes with a digital input interface for DANTE.
The loudspeaker’s vertical beam dispersion characteristics can be intuitively controlled – in real time – using FOHHN AUDIO SOFT: The vertical beam width, ranging from 0° to 90°, and vertical inclination angle, ranging from -40° to +40°, can both be adjusted in precise 0.1° increments. This means that unwanted reflections from floors and ceilings can be avoided. The result: optimum levels of speech intelligibility, a pleasing sound image and excellent sound quality – even in the most challenging acoustic conditions.
The active, electronically inclinable DLI-230 DAN line source speaker enables intelligent and target-oriented sound coverage in venues that have the most difficult acoustic conditions. Using intuitive software, both the vertical dispersion characteristics and the inclination angle of the loudspeaker beam can be precisely adjusted – in real time – to perfectly suit to the room’s acoustic situation.
The Linea Focus DLI-230 DAN is a high performance line source system, which can be electronically controlled and monitored. The system is equipped with 16 state-of-the-art Class D amplifiers and DSP technology specially developed for this area of application, plus 16 coated 4” long excursion drivers. This perfect balance of amplifier-, digital signal processor- and loudspeaker technology enables a maximum SPL of 130 dB to be achieved. The DLI-230 DAN comes with a digital input interface for DANTE.
The loudspeaker’s vertical beam dispersion characteristics can be intuitively controlled – in real time – using FOHHN AUDIO SOFT: The vertical beam width, ranging from 0° to 90°, and vertical inclination angle, ranging from -40° to +40°, can both be adjusted in precise 0.1° increments. This means that unwanted reflections from floors and ceilings can be avoided. The result: optimum levels of speech intelligibility, a pleasing sound image and excellent sound quality – even in the most challenging acoustic conditions.
The SA150P+ is a powered digital steering column loudspeaker, 1.50m designed for confined spaces with horizontal seating or in combination with larger models. The SA150P+ ensures a homogenous SPL coverage on the audience up to 21meters.
StepArray+ combines all of the advantages of the patented DGRC technology with the power of Dante™ in a range of self-powered beam-steerable column speakers.
With models ranging from 1.50m to 4.50m for flat or tiered audiences, the StepArray+ delivers great performance and high intelligibility levels in a cost-effective package. The Digital and Geometric Radiation Control technology allows for less DSP and amplification channels to be used in a column, thus bringing down the final cost of an installation, while retaining the highest level of performance.
DCN-3388R wireless microphone conference system support different meeting modes, like, Limit (1/2/3/4), FIFO (1/2/3/4) and Chairman Only.
DCN-3388R wireless microphone conference system support different meeting modes, like, Limit (1/2/3/4), FIFO (1/2/3/4) and Chairman Only. Single audio receiver allows messages’ receiving from one thousand microphones simultaneously, and when linked with central processor, video tracking for 256 microphones could be realized. Meanwhile, five microphones could be activated at the same time.
Signal’s transmission could be realized with FM (frequency modulation), featuring high fidelity, high signal-to-noise ratio, and low latency. Unique state-of-art condenser microphone cartridge is introduced, which is resistant to whistle, highly sensitive, allowing excellent audio transmission effect.
Wireless transmission is introduced for both audio channel and control channel with no need for extra cable routing. Besides, the system could be installed anywhere as soon as there is a signal coverage, so conference room’s displaying is more convenient.
The system features ultra-low power, so continuous speaking for more than eight hours or more than thirty hours stand-by is supportable. Battery of the system could be charged with DC power adapter, which could be installed directly on microphones, or charging case. Charging case is designed with intelligent power management integrated circuit, so the battery could be well protected for prolonged service life and safe us.
Built-in USB is installed on its audio receiver, allowing both the audio recording and playing function. Besides, when used together with a Bluetooth device, the audios inside the device could also be played with our system.
Built-in Dante audio transmission interface is installed.
The system allows an average working distance of 60m, but 80m is also possible.
The SA230S+ is a powered digital steering column loudspeaker, 2.30m designed for mid-sized spaces with a 5 to 20° rake. The SA230S+ ensures a homogenous SPL coverage on the audience up to 29meters.
StepArray+ combines all of the advantages of the patented DGRC technology with the power of Dante™ in a range of self-powered beam-steerable column speakers.
With models ranging from 1.50m to 4.50m for flat or tiered audiences, the StepArray+ delivers great performance and high intelligibility levels in a cost-effective package. The Digital and Geometric Radiation Control technology allows for less DSP and amplification channels to be used in a column, thus bringing down the final cost of an installation, while retaining the highest level of performance.
The SA300P+ is a powered digital steering column loudspeaker, 3.00m designed for large-sized spaces with horizontal seating. The SA300P+ ensures a homogenous SPL coverage on the audience up to 45meters.
StepArray+ combines all of the advantages of the patented DGRC technology with the power of Dante™ in a range of self-powered beam-steerable column speakers.
With models ranging from 1.50m to 4.50m for flat or tiered audiences, the StepArray+ delivers great performance and high intelligibility levels in a cost-effective package. The Digital and Geometric Radiation Control technology allows for less DSP and amplification channels to be used in a column, thus bringing down the final cost of an installation, while retaining the highest level of performance.
The SA300S+ is a powered digital steering column loudspeaker, 3.00m designed for large-sized spaces with a 5 to 20° rake. The SA300S+ ensures a homogenous SPL coverage on the audience up to 36meters.
StepArray+ combines all of the advantages of the patented DGRC technology with the power of Dante™ in a range of self-powered beam-steerable column speakers.
With models ranging from 1.50m to 4.50m for flat or tiered audiences, the StepArray+ delivers great performance and high intelligibility levels in a cost-effective package. The Digital and Geometric Radiation Control technology allows for less DSP and amplification channels to be used in a column, thus bringing down the final cost of an installation, while retaining the highest level of performance.
The SA450P+ is a powered digital steering column loudspeaker, 4.50m designed for very large-sized spaces where a semi-distributed PA system cannot be used. The SA450P+ ensures a homogenous SPL coverage on the audience up to 90meters.
StepArray+ combines all of the advantages of the patented DGRC technology with the power of Dante™ in a range of self-powered beam-steerable column speakers.
With models ranging from 1.50m to 4.50m for flat or tiered audiences, the StepArray+ delivers great performance and high intelligibility levels in a cost-effective package. The Digital and Geometric Radiation Control technology allows for less DSP and amplification channels to be used in a column, thus bringing down the final cost of an installation, while retaining the highest level of performance.
The XDANTE-1 Dante Network Audio Changeover System Provides a simple and efficient way to switch between dual-redundant Dante sources at the push of a single button.
The XDANTE-1 Dante Network Audio Changeover System Provides a simple and efficient way to switch between dual-redundant Dante sources.
The unit consists of two independently controllable 64 into 32 channel Dante switchers. These can be combined to allow switching of up to 128 inputs to 64 outputs.
The unit is housed in a 1U 19” rackmount enclosure, with dual redundant switch mode PSUs as standard.
The new Network DI from ARX is an analog breakout box using the popular Dante network protocol to extract audio from a network and convert it to Transformer isolated analog audio, suitable for connecting to mixing consoles and other devices requiring an analog source.
The new Network DI from ARX is an analog breakout box using the popular Dante network protocol to extract audio from a network and convert it to Transformer isolated analog audio, suitable for connecting to mixing consoles and other devices requiring an analog source.
A Mono switch on the front panel provides Left and Right analog summation for applications requirig a mono signal.
The Network DI is housed in a heavy duty all-steel chassis finished in attractive matt textured polyurethane, with hardwearing epoxy screen printing and slip resistant rubber base pad.
Security features include an optional bracket kit for under-table mounting.
The ARX NetSplit is a unique ‘Dante / Analog Splitter that is switchable into Dante mode or Analog mode.
The ARX NetSplit is a unique ‘Dante / Analog Splitter that is switchable into either of two modes:
In Dante mode it will extract 2 channels of digital audio from the network via aRJ45 Ethernet input, and split them to 2 channels of 1:4 splitter
In Analog mode it can take 2 channels of Analog audio, and split them to 2 channels of 1:4 splitter
The NetSplit can receive audio channels from a Dante network and provide studio quality, low latency audio via balanced XLR output connectors to analog audio equipment.
Thus any audio available on the network can be routed via the NetSplit to an amplifier, powered speaker(s), mixing console, digital signal processor and many other analog audio devices.
The NEXUS system is an audio network, a router, and an I/O matrix that also offers the following:
Audio-format conversion
A/D and D/A converter systems
Audio processing
Data forwarding
Routing interfaces
Multi-channel metering
Power-amplifier control
Intercom
Logical functions, and much more
NEXUS Base Devices are compact 19" mainframes for static or mobile use. 1 U, 3 U, 6 U, 9 U, 12 U, and 15 U versions are available. Input and output ports are on 3 U slide-in boards. NEXUS Base Devices are based on a 4 HP grid and accommodate modular boards such as I/O boards for analogue and digital audio, DSP boards for audio processing, special routing boards for data or switching signals and fibre-optic interface boards for interconnecting Base Devices.
The NEXUS system integrates with Dante using the Stage Tec NEXUS XDIP interface card.
The IPD-HP82-EZ is an 8" open-ceiling speaker.
The IPD-HP82-EZ is an 8" open-ceiling speaker. Dante®-addressable coaxial pendant speaker incorporates one 8.0 inch (203 mm) high power coaxial driver with BroadBeamHP™ compression driver technology for long throw and smooth directivity. Low latency digital audio, power, and control are delivered to the speaker via standard category cable; connection is made on the other end to the STNet-Switch or other PoE / PoE+ switch. May also be powered via a 24V DC barrel connector for non-PoE installations. Configuration and zoning of the speaker are accomplished via software. Includes hanging hardware with galvanized steel cables and hanging bracket for fast, easy and secure installation. Unit may be hung or mounted direct-to-conduit via locking cover plate. Enclosure constructed of injection molded ABS with glasber reinforcement for lasting durability in indoor or outdoor applications. Aluminum grille with protective powder coated finish.
The Panaray MSA12X loudspeaker advances the Bose Professional line of modular arrays with a self-powered electronically-steerable loudspeaker offering consistent audio levels with outstanding vocal intelligibility and fullrange music reinforcement.
The Panaray MSA12X loudspeaker advances the Bose Professional line of modular arrays with a self-powered electronically-steerable loudspeaker offering consistent audio levels with outstanding vocal intelligibility and fullrange music reinforcement.
The MC850-CV-D is an 8 channel, 70/100V, 1RU amplifier delivering 50W per channel with channel-to-channel power sharing, Ethernet and RS-232 control. The MC850-CV-D amplifier supports Dante™ audio and has AES67 support.
The MC850-CV-D is an 8 channel, 70/100V, 1RU amplifier delivering 50W per channel with channel-to-channel power sharing, Ethernet and RS-232 control. The MC850-CV-D amplifier supports Dante™ audio and has AES67 support.
The MC850 family embodies the future of smart amplification with networked audio inputs, Ethernet configuration, control and reporting and flexible power allocation between channels. Whether it’s low impedance, 70V/100V or a mix of the two, there is a model for you with 8 channels and a total of 400W. Setup and configuration can be done anywhere with network access allowing the installer to locate in the zone for real time feedback. The software is simple, intuitive and targeted in scope to make set up easy and allow for granular control. There are 8 independent Dante™ inputs. The MC850 family is AES67 compatible. We built the MC850 family with the network in mind and you’ll find it shows.
• 8 independent Dante™ inputs
• Primary and Secondary Dante™ ports (redundant or switched)
• Ethernet port for control and reporting
• RS-232 control
• Power sharing up to 100W per channel
• Compact 1RU enclosure
• Made in USA
The MC850-LZ-D is an 8 channel, 4/8 Ohm, 1RU amplifier delivering 50W per channel with channel-to-channel power sharing, Ethernet and RS-232 control. The MC850-LZ-D amplifier supports Dante™ audio and has AES67 support.
The MC850-LZ-D is an 8 channel, 4/8 Ohm, 1RU amplifier delivering 50W per channel with channel-to-channel power sharing, Ethernet and RS-232 control. The MC850-LZ-D amplifier supports Dante™ audio and has AES67 support.
The MC850 family embodies the future of smart amplification with networked audio inputs, Ethernet configuration, control and reporting and flexible power allocation between channels. Whether it’s low impedance, 70V/100V or a mix of the two, there is a model for you with 8 channels and a total of 400W. Setup and configuration can be done anywhere with network access allowing the installer to locate in the zone for real time feedback. The software is simple, intuitive and targeted in scope to make set up easy and allow for granular control. There are 8 independent Dante™ inputs. The MC850 family is AES67 compatible. We built the MC850 family with the network in mind and you’ll find it shows.
8 independent Dante™ inputs
Primary and Secondary Dante™ ports (redundant or switched)
The MC850-MXZ-D has 6 channels @ 70/100V, and 2 channels @ 4/8 Ohm. The 1RU amplifier delivers 50W per channel with channel-to-channel power sharing.
The MC850-MXZ-D has 6 channels @ 70/100V, and 2 channels @ 4/8 Ohm. The 1RU amplifier delivers 50W per channel with channel-to-channel power sharing. It has Ethernet and RS-232 control. The MC850-MXZ-D amplifier supports Dante™ audio and has AES67 support.
The MC850 family embodies the future of smart amplification with networked audio inputs, Ethernet configuration, control and reporting and flexible power allocation between channels. Whether it’s low impedance, 70V/100V or a mix of the two, there is a model for you with 8 channels and a total of 400W. Setup and configuration can be done anywhere with network access allowing the installer to locate in the zone for real time feedback. The software is simple, intuitive and targeted in scope to make set up easy and allow for granular control. There are 8 independent Dante™ inputs. The MC850 family is AES67 compatible. We built the MC850 family with the network in mind and you’ll find it shows.
8 independent Dante™ inputs
Primary and Secondary Dante™ ports (redundant or switched)
With total control of all processing via the front panel, and all the remote options you could ever need, the new DPA Series can work alongside your existing amplifiers, with improved flexibility, performance and protection.
With total control of all processing via the front panel, and all the remote options you could ever need, the new DPA Series can work alongside your existing amplifiers, with improved flexibility, performance and protection.
Combining new technology power amplification with the highest definition XTA DSP, the DPA Series take audio performance and convenience to a whole new level. Powerful processing features such as FIR filtering and Dante Networking work alongside unique enhancements including 4 local + 4 aux DSP channels (also supplied to the network), meaning a single DPA amplifier can control a stereo 4-way system with no external processing and supply audio to a Non-DSP amplifier either via analogue or a single Cat5 cable. Control via new AudioCore with advanced grouping architecture, or go wireless with our bespoke iPad app DeltaDirect.
Configure and tune using a fast, powerful combination of AudioCore (XTA’s fast efficient control software platform) and DeltaDirect, the bespoke iPad app. Every aspect of a network of amplifiers can be controlled and monitored wirelessly.
Direct Ethernet, USB, and RS485 control options plus configurable GPIO offer unparalleled remote control flexibility.
Now you don’t have to choose between the highest quality amplification, and digital audio networking convenience. Or between incredible power and the ability to work within analogue or digital systems. You can have it all.
Now you don’t have to choose between the highest quality amplification, and digital audio networking convenience. Or between incredible power and the ability to work within analogue or digital systems. You can have it all.
The DNA Series offers the assurance of XTA’s highest quality audio power amp technology with future proofing via the inclusion of simple to use digital audio networking.
Fast rear panel switching allows the amplifier to accept either four channels of analogue audio or pick up four channels of networked audio, via Dante, which is then converted using 24 bit 96kHz ADCs.
Connect to an DPA amplifier using a single CAT5 cable to realise a stereo 4 way system with no further external processing required. Switch back to analogue to use as a powerful traditional quad channel amplifier. Run bridged channel pairs or link adjacent inputs for total flexibility in either analogue or digital mode.
Deliver exceptional audio quality to every space with the ultra-small-footprint Solaro QR1, a PoE-powered digital signal processor with eight user-configured I/O card slots. This open-architecture product can be populated with all combinations of Solaro Series I/O card, offering capabilities including analog audio, USB (with volume/mute status sync), GPIO, relay control and AES/EBU digital audio. Additionally, Solaro QR1 connects to an installed network over standard CatX cable with in-built 4x4 Dante audio networking, for streamlined connection of ceiling microphones and other IP-based audio products. With license-activated HearClear acoustic echo cancellation and an integrated control engine capable of Lua scripting, Solaro QR1 is an ideal solution for individual conference rooms, classrooms and legislative spaces at an exceptional price-point.
Solaro FR1 is a 1U 16-card-slot DSP with modular I/O functionality that can evolve to meet your future requirements, while benefiting from the processing power to drive multiple rooms over an installed CatX network. Xilica's open-architecture digital signal processor can be populated with any combination of Solaro Series I/O card, offering capabilities including analog audio, USB (with volume/mute HID support), GPIO, relay control and AES/EBU digital audio. Incorporating the optional XC-CTODN module for networked audio, Solaro FR1 can handle up-to 64x64 bi-directional channels of audio over Dante, using standard CatX cable with no proprietary switches. With the capability to grow as you need, Solaro FR1 is a multi-purpose, scalable signal processor suited to most medium-to-large applications including multi-room conferencing, education spaces, and mass communication.
The SF-BNC2 is a bidirectional Dante audio network interface. It features two unbalanced audio inputs (left and right) on RCA or stereo 3.5 mm Mini-jack connectors, as well as two unbalanced audio outputs (left and right) on RCA and stereo 3.5 mm Mini-jack connectors.
The SF-BNC2 is a bidirectional Dante audio network interface. It features two unbalanced audio inputs (left and right) on RCA or stereo 3.5 mm Mini-jack connectors, as well as two unbalanced audio outputs (left and right) on RCA and stereo 3.5 mm Mini-jack connectors. Special software is not required to configure the SF-BNC2. Each input provides a network digital audio level of -20 dBFS for an unbalanced -10 dBV input. Each output provides -10 dBV unbalanced for a network digital audio level of -20 dBFS. The SF-BNC2 is a professional grade product for studio quality fidelity and low noise performance.
The SF-BNC2 is PoE powered. Valid PoE power and synchronization to the Dante network is indicated by a green LED visible from the front of the unit.
The SF-BNC2 is constructed in a durable, professional all-metal enclosure suitable for free-standing, surface-mounted or rack-mounted operation. This full-featured SYSFLEX product is engineered and manufactured in the U.S.A for continuous duty in demanding installations. The versatility of SYSFLEX products adds enormous flexibility in the design and installation of professional A/V systems.
Features:
Dante Network Interface for Two Audio Inputs and Two Audio Outputs
Inputs and Outputs on Front-Panel RCA Jacks and Stereo 3.5 mm Mini-Jacks
The SF-DN4 is a digital audio interface that converts two stereo digital audio sources to four Dante network audio channels.
The SF-DN4 is a digital audio interface that converts two stereo digital audio sources to four Dante network audio channels. The SF-DN4 automatically detects a valid input on any of the three input jacks: S/PDIF optical, S/PDIF coaxial, or AES/EBU XLR. The input is decoded, re-clocked and transmitted to the Dante network. A yellow front-panel LOCK LED indicates a valid source received without any lock errors. Special software is not required to configure the module. The SF-DN4 is a professional grade product for studio quality performance.
The SF-DN4 is PoE powered. Valid PoE power and synchronization to the Dante network is indicated by a green LED visible from the front of the unit.
The SF-DN4 is constructed in a durable, professional all-metal enclosure suitable for free-standing, surface-mounted or rack-mounted operation. This full-featured SYSFLEX product is engineered and manufactured in the U.S.A for continuous duty in demanding installations. The versatility of SYSFLEX products adds enormous flexibility in the design and installation of professional A/V systems.
Features:
Converts Two Left/Right Digital Audio Sources to Four Dante Network Audio Signals
AES/EBU or S/PDIF Coaxial or Optical Inputs
Supports Input Sampling Rates from 44.1 kHz to 192 kHz
The SF-ND2 is a digital audio interface that converts two Dante network audio channels to a stereo digital audio output.
The SF-ND2 is a digital audio interface that converts two Dante network audio channels to a stereo digital audio output. The output is switch-selectable to provide an AES/EBU on XLR, or coaxial and optical S/PDIF. The switch enables the appropriate output jack and any required electrical and data format conversion. Special software is not required to configure the module. The SF-ND2 is a professional grade product for studio quality performance.
The SF-ND2 is PoE powered. Valid PoE power and synchronization to the Dante network is indicated by a green LED visible from the front of the unit.
The SF-ND2 is constructed in a durable, professional all-metal enclosure suitable for free-standing, surface-mounted or rack-mounted operation. This full-featured SYSFLEX product is engineered and manufactured in the U.S.A for continuous duty in demanding installations. The versatility of SYSFLEX products adds enormous flexibility in the design and installation of professional A/V systems.
Features:
Converts Two Dante Network Audio Signals to Left/Right Digital Audio
The SF-NH1 is a headphone amplifier that converts two Dante network audio channels to a stereo headphone output with front-panel level adjustment.
The SF-NH1 is a headphone amplifier that converts two Dante network audio channels to a stereo headphone output with front-panel level adjustment. The output connects through a stereo 3.5 mm Mini-jack. Each channel provides 100 mW into 100 ohms for a network digital audio level of 0 dBFS. Special software is not required to configure the module. The SF-NH1 is a professional grade product for studio quality fidelity and low noise performance.
The SF-NH1 is PoE powered. Valid PoE power and synchronization to the Dante network is indicated by a green LED visible from the front of the unit.
The SF-NH1 is constructed in a durable, professional all-metal enclosure suitable for free-standing, surface-mounted or rack-mounted operation. This full-featured SYSFLEX product is engineered and manufactured in the U.S.A for continuous duty in demanding installations. The versatility of SYSFLEX products adds enormous flexibility in the design and installation of professional A/V systems.
Features:
Converts Two Dante Network Audio Signals to a Stereo Headphone
Output on Professional Quality 3.5 mm stereo MINI Jack
The SF-NL2 is a line-level interface that converts two Dante network audio channels to two balanced audio outputs on XLR connectors.
The SF-NL2 is a line-level interface that converts two Dante network audio channels to two balanced audio outputs on XLR connectors. Each channel provides +4 dBu balanced for a network digital audio level of -20 dBFS. Each output is equipped with a selector to set the output to line level or attenuate the output by 50 dB to mic level. Special software is not required to configure the module. The SF-NL2 is a professional grade product for studio quality fidelity and low noise performance.
The SF-NL2 is PoE powered. Valid PoE power and synchronization to the Dante network is indicated by a green LED visible from the front of the unit.
The SF-NL2 is constructed in a durable, professional all-metal enclosure suitable for free-standing, surface-mounted or rack-mounted operation. This full-featured SYSFLEX product is engineered and manufactured in the U.S.A for continuous duty in demanding installations. The versatility of SYSFLEX products adds enormous flexibility in the design and installation of professional A/V systems.
Features:
Converts Two Dante Network Audio Signals to Balanced Analog
Third party applications that use Dante Ready™ allow customers to purchase and activate Dante audio channels after installation using the Dante Activator tool in Dante Controller 4.5 or higher. Dante Activator is tied to an active Audinate user account and accepts standard credit card payments.
