Dante-enabled Product Catalog

The ADX-120 Networked Announce / Talkback unit provides a fully-featured solution for television and radio announce booths. All required functions are included, including support for RTS format two-wire PL and IFB beltpacks. The ADX-120 is widely used in high-end sports and entertainment broadcast events. See lancedesign.com for more information. The ADX-120 Networked Announce / Talkback unit provides a fully-featured solution for television and radio announce booths. All required functions are included, including support for RTS format two-wire PL and IFB beltpacks. The ADX-120 is widely used in high-end sports and entertainment broadcast events. See lancedesign.com for more information.

The ADX-140 XLR Interface panel provides four mic/line inputs, two wet/dry IFB outputs, and two RTS-format PL channels in a network-connected 1RU unit. Applications include broadcast announce booths, interview positions, locker rooms, etc. The ADX-140 XLR Interface panel provides four mic/line inputs, two wet/dry IFB outputs, and two RTS-format PL channels in a network-connected 1RU unit. Applications include broadcast announce booths, interview positions, locker rooms, etc. Please see www.lancedesign.com/audio-products/ADX-140 for more information.

The VITA is often used as a remote link to the main commentary unit. It is favoured by pitch side interviewers, and is popular in combinations with wireless systems. Inputs The main input is switchable between mic, mic+48v phantom power, and line. The input has an adjustable gain control to meet a wide range of dynamic, condenser, and ribbon microphones. The input passes through a broadcast quality dsp controlled compressor/limiter circuit prior to the A/D converters to maximize headroom and designed to manage the peaks of excited commentary. The A/D converters are full broadcast spec low noise, 48K 24bit designed for on air use. Outputs/Talkback There are two output circuits. One is used as the main programme audio, the other as a talkback circuit. There are separate button controls for each of these using Config+. They can each can be independently configured for latching or momentary, with the programme button also having a 'cough' feature. All talkback I/O connections are via the RJ45/CAT5 Dante network audio connection. Monitoring There are two monitoring inputs each with independent level control. Each of these inputs can be switched from the left ear, right ear, or both ears to the stereo headphone amplifier. The headphone amplifier is our high performance intelligent circuit which automatically adjusts its output level for high or low impedance headphones and can also drive mono earpieces and headphones. There are 2 off 4 LED level meters both indicating -12 to +6 dB. One LED meter is located on the front panel to enable easy visualization of the audio levels if the VITA is being used as a table top device and the other meter is located on the top panel facing the operator when used by its beltclip. Power Via PoE on the network connection, or via an external DC power supply. The VITA is often used as a remote link to the main commentary unit. It is favoured by pitch side interviewers, and is popular in combinations with wireless systems.

The Express ip was designed to provide a quick and easy solution when it is necessary to provide interfacing for two commentators, with simple facilities, into a Dante network audio network. The Express ip was designed to provide a quick and easy solution when it is necessary to provide interfacing for two commentators, with simple facilities, into a Dante network audio network. This high quality commentary unit is ideal for those looking for cost effective solutions without paying for unwanted features; the Express Box is worthy of investigation. Inputs Two front panel mic inputs with selectable 48v phantom power. Outputs/Talkback Each mic input has its own individual output. The second mic output can be switched on the rear panel to be a mix of both mic inputs.  The two talkback circuits have individual outputs and are common for both commentators. Monitoring There are four inputs for external sources, and one sidetone pot of their own voice. These are available independently to each commentator on individual pots, so each can adjust the inputs for their own preference of mix level. There are two 6.35mm headphone sockets – 1 for each commentator. A 7 segment LED PPM meter displays level.  Network The network connection is AES67/Dante compatible and is available on the rear panel on an RJ45/CAT5 connection.  It offers 4 input channels and 4 output channels. Power There is an internal switch mode AC power supply, or the Express ip can be powered by PoE if powered by a switch that provides power over Ethernet.

The Glensound Inferno is acommentary system for a single user or a large multi-commentator system. Connections use audio network cabling, either directly to the GSI-Dark88 break out box, or across a structured network. The Dante audio protocol is used to transport the audio, making the system flexible an dprogrammable as part of a larger Dante system.  

• Single mic/line/48v input with compressor/limiter
• Headphone mixer has 7 inputs supplied from the Dante network, plus the local input (sidetone)
• Each headphone input has left/both/right headphone switching 
• 7 talkback circuits are programmable via the Dante network