Dante-enabled Product Catalog

Now you can power SSP6 Multiducers using audio from your Dante network. The LZ220 amp is a single cable device designed for use in small or medium zones, with no need for a local power outlet. The amp uses a 60W port on a PoE++ switch (or comparable injector) with the convenience of either low impedance or constant voltage speaker outputs. Now you can power SSP6 Multiducers using audio from your Dante network. The LZ220 amp is a single cable device designed for use in small or medium zones, with no need for a local power outlet. The amp uses a 60W port on a PoE++ switch (or comparable injector) with the convenience of either low impedance or constant voltage speaker outputs. Specifications

• Configurations
  • 4/8/16 Ω
• Power Output
  • 2 x 20W
• Control Options
  • Dante®
• DSP processes/EQ
  • EQ optimized for SSP6
• Frequency Response
  • 20 Hz – 20 kHz, 4/8 Ω
• Connectors
  • Input: Dante (RJ45) 
  • Output: Euroblock
• Regulatory
  • UL 2043 listed, CE, RoHS
• Weight
  • 0.60 lbs (0.27 kg)
• Dimensions
  • 1.20” H x 6.70” W x 4.31” D (30.4mm H x 170.1mm W x 109.4mm D)

Now you can power SSP6 Multiducers using audio from your Dante network. The CV140 amp is a single cable device designed for use in small or medium zones, with no need for a local power outlet. It uses a 60W port on a PoE++ switch (or comparable injector) with the convenience of either low impedance or constant voltage speaker outputs. Now you can power SSP6 Multiducers using audio from your Dante network. The CV140 amp is a single cable device designed for use in small or medium zones, with no need for a local power outlet. It uses a 60W port on a PoE++ switch (or comparable injector) with the convenience of either low impedance or constant voltage speaker outputs. The CV140 provies 1 channel of 40 watts at 70V/100V.   Specifications:

• Configurations
  • 70/100V
• Power Output
  • 1 x 40W
• Control Options
  • Dante®
• DSP processes/EQ
  • EQ optimized for SSP6
• Frequency Response
  • 100 Hz – 20 kHz, 70.7 / 100V
• Connectors
  • Input: Dante (RJ45) 
  • Output: Euroblock
• Regulatory
  • UL 2043 listed, CE, RoHS
• Weight
  • 1.0 lbs (0.45 kg)
• Dimensions
  • 1.20” H x 6.70” W x 4.31” D (30.4mm H x 170.1mm W x 109.4mm D)

The “Swiss Army Knife” of small amplifiers, the RevNet™ 2140-D gives you the power, versatility and quality you need for both commercial and high-end residential installations The “Swiss Army Knife” of small amplifiers, the RevNet™ 2140-D gives you the power, versatility and quality you need for both commercial and high-end residential installations. One RevNet amp will power two speakers. Units may be daisy-chained for larger applications, and the RevNet 2140-D has the added power of full Dante® compatibility with AES67 support. Quality Loads of headroom with 26 dB gain, coupled with the lowest distortion you’ll find on any comparable pro audio amp. Audiophile-quality RevNet amps are suitable for both pro audio and high-end HiFi operation. Powerful 140 watts per channel (280 W in mono) will power nearly any installed speaker in the room. RevNet amps can be used in 4/8/16 Ohm or 70/100V installations Easy to Install Fast-wiring Phoenix connectors allow you to quickly pre-wire sources and then just plug them into the amp. Versatile Control Direct RVC connections along with USB, TCP/IP, WiFi or Dante make it easy to manage your audio sources and volume. Onboard DSP for Easy Configuration A built-in sound masking generator allows you to quickly configure the amp for corporate uses, while 31 band EQ and RMS compressor bring you complete control over the sound of the room. Specifications

• 2 x 140W@16/8/4 , 100V/70V @280W
• Phoenix connectors for Inputs/Link Output, Amp Out and RVC
• Dante® (with AES67 support) and USB interfaces along with Integrated WiFi for remote control and set up
• Built-in sound masking generator
• 31 band fully customizable DSP
• In-Room AutoEQ and mobile app support