Dante-enabled Product Catalog

The Mir-F family of digital processors are Marani's new flagship system processors, including the MIR480I and MIR880F.The hardware adopts top AD/DA chips with excellent -96dBu background noise. It also has analog, digital AES/EBU, and Dante signal access capabilities, and has automatic switching function. Any signal can be set as the highest priority. As the core processor of the system, it has the redundancy and backup characteristics, and is suitable for government projects, high-end clubs, large mobile performances, theaters, radio and television and other places with higher requirements for signal processing.

MDA 4-7000DM is a high-performance and high-power touring-grade digital power amplifier. It has a total power output of 4x1600W under a 4-channel 4Ω load. Built-in powerful digital processor with 4 inputs and 4 outputs. The 4.3-inch high-definition touch screen clearly displays the system status, and the sufficient power is equipped with a powerful built-in DSP to enable this power amplifier to take into account both the fixed installation and the mobile performance market.

MDA4-7000DM adopts powerful Marani DSP, including 4 input and 4 output processing channels. Both DSP and AD/DA run at 96KHz sampling rate. The complete processing function provides a complete crossover solution for the speaker. With signal hot backup automatic switching function, 3 levels of priority can easily back up the input source.

From input gain/delay/noise gate/EQ/compression

/FIR /to output gain/delay/polarity/X-over/FIR/EQ/RMS compressor/Peak limiter, there are up to 13 PEQ types to choose, The output crossover filter includes the classic Linquez Rayleigh/Bessel/Butterworth, and the MARANI brand unique NXF（Northed X-over Filter）, built-in FIR filter, and newly added MIR linear phase filter can make the phase of the crossover point easier to join while maintaining a very low delay. All the functions we provide are designed to help you better restore the sound.

LPP480F is a high end 4-IN/8-OUT digital speaker management system which is MARANI® flagship controller, adding astonishing hardware and software features on the basis of the LPP series. LPP480F is a high end 4-IN/8-OUT digital speaker management system which is MARANI® flagship controller, adding astonishing hardware and software features on the basis of the LPP series. Designed for maximum versatility, it provides all the processing and control necessary for both live and fixed installation use. Proving for any crossover configuration, it offers 4 analog inputs, 8 analog outputs, 2 Stereo AES/EBU inputs, and 4 Dante™ inputs, managed by 3 powerful MARANI® DSP Engines, for a full 96kHz processing, in addition to 24 Bit Texas Instruments AD/DA Converters. Each input channel provides a choice of a 13-band Parametric EQ, with plenty of filter types, Gain control, Noise Gate, RMS Compressor, Internal White/Pink Noise Generator, and configurable Delay. Each output offers up to 7-band of parametric equalization, in addition to the IIR crossover filters which themselves provide slopes from 6dB/Octave up to 48dB/Octave. Each output path also features PEAK Limiter, RMS Compressor and configurable Delay. Output X-Over Filtering can be selected to be IIR style, with the complete set of Classic Hp/Lp filters (Butterworth, Linkwitz-Railey, Bessel) or FIR, being for each output channel available a 512 taps FIR filter which can be set as Hp/Lp/Bp. On each one of the 4 Input paths, one more 1024 taps FIR is available for Phase Correction purposes, where the Coefficients Calculation can be supported by an embedded Wizard tool or can be loaded from external sources as Third Parties software for the FIR filters coefficients generation. Being the phase correction operated by an FIR Filter which can be Asymmetrical other than Symmetrical, a powerful tool for adjusting/reducing the FIR latency is available, allowing therefore the LPP480F to be used without any problem also for Live performances still having the Phase correction FIR running together with the eventual FIR for the X-Over implementation in cascade. The LPP480F supports a full set of matrix mixing modes where Input sources can be routed/mixed to the Input paths, inputs paths may be routed/mixed in any ratio to any output and couple of outputs (1/2, 3/4, 5/6, 7/8) can be swapped at pleasure. For remote configuration and control the LPP480F can be connected via USB /TCP-IP Interfaces. Moreover, with front panel dedicated buttons, user can go directly to the editing pages like Xover, channel editing windows, while can monitor the real-time meters and other parameters from the LCD screen.

LPP260A is a High End 2-IN/6-OUT digital speaker management system which maintains the same outstanding Sound Quality of the former DPA260A version, but highly improved in terms of DSP processes and added of an astonishing FIR filtering tool set. LPP480A is a High End 4-IN/8-OUT digital speaker management system which maintains the same outstanding Sound Quality of the former DPA480 version, but highly improved in terms of DSP processes and added of an astonishing FIR filtering tool set. Designed for maximum versatility, it provides all the processing and control necessary for both live and fixed installation use. Proving for any crossover configuration, it offers 4 analog inputs, 8 analog outputs and 2 AES/EBU inputs, managed by 2 powerful MARANI® DSP Engines, for a full 96kHz processing, in addition to 24 Bit AD/DA Converters. Each input channel provides a choice of a 13-band Parametric EQ, Gain control, Noise Gate, RMS Compressor, Internal White/Pink Noise Generator, and configurable Delay. Each output offers up to 7-band of parametric equalization, in addition to the IIR crossover filters which themselves provide slopes from 6dB/Octave up to 48dB/Octave. Each output path also features PEAK Limiter, RMS Compressor and configurable Delay. Particularly, the Output X-Over Filtering can be selected to be IIR style, with the complete set of Classic Hp/Lp filters (Butterworth, Linkwitz-Railey, Bessel) or FIR, being for each output channel available a 512 taps FIR filter which can be set as Hp/Lp/Bp. On each one of the 4 Input paths, one more 1024 taps Asymmetrical FIR is available for Phase Correction purposes, where the Coefficients Calculation can be supported by an embedded Wizard tool or can be Loaded from external sources as Third Parties software for the FIR filters coefficients generation. Being the phase correction FIR Asymmetrical, a powerful tool for adjusting/reducing the FIR latency is available, allowing therefore the LPP480A to be used without any problem also for Live performances still having the Phase correction FIR running together with the eventual FIR for the X-Over implementation in cascade. The LPP480A supports a full set of matrix mixing modes where Input sources can be routed/mixed to the Input paths, inputs paths may be routed/mixed in any ratio to any output and couple of outputs (1/2, 3/4, 5/6, 7/8) can be swapped at pleasure. For remote configuration and control the LPP480A can be connected via USB/RS485/TCP-IP connections. The control remote PC software allows simultaneous control up to 32 units, setting all parameters and showing real time levels. 

LPP260A is a High End 2-IN/6-OUT digital speaker management system which maintains the same outstanding Sound Quality of the former DPA260A version, but highly improved in terms of DSP processes and added of an astonishing FIR filtering tool set. LPP260A is a High End 2-IN/6-OUT digital speaker management system which maintains the same outstanding Sound Quality of the former DPA260A version, but highly improved in terms of DSP processes and added of an astonishing FIR filtering tool set. Designed for maximum versatility, it provides all the processing and control necessary for both live and fixed installation use. Proving for any crossover configuration, it offers 2 analog inputs, 6 analog outputs and 1 AES/EBU input, managed by 2 powerful MARANI® DSP Engines, for a full 96kHz processing, in addition to 24 Bit AD/DA Converters. Each input channel provides a choice of a 13-band Parametric EQ, Gain control, Noise Gate, RMS Compressor, Internal White/Pink Noise Generator, and configurable Delay. Each output offers up to 7-band of parametric equalization, in addition to the IIR crossover filters which themselves provide slopes from 6dB/Octave up to 48dB/Octave. Each output path also features PEAK Limiter, RMS Compressor and configurable Delay. Particularly, the Output X-Over Filtering can be selected to be IIR style, with the complete set of Classic Hp/Lp filters (Butterworth, Linkwitz-Railey, Bessel) or FIR, being for each output channel available a 512 taps FIR filter which can be set as Hp/Lp/Bp. On each one of the 2 Input paths, one more 1024 taps Asymmetrical FIR is available for Phase Correction purposes, where the Coefficients Calculation can be supported by an embedded Wizard tool or can be Loaded from external sources as Third Parties Sw for the FIR filters coefficients generation. Being the phase correction FIR Asymmetrical, a powerful tool for adjusting/reducing the FIR latency is available, allowing therefore the LPP260A to be used without any problem also for Live performances still having the Phase correction FIR running together with the eventual FIR for the X-Over implementation in cascade. The LPP260A supports a full set of matrix mixing modes where Input sources can be routed/mixed to the Input paths, inputs paths may be routed/mixed in any ratio to any output and couple of outputs (1/2, 3/4, 5/6) can be swapped at pleasure.

LPP240A is a High End 2-IN/4-OUT digital speaker management system which maintains the same outstanding Sound Quality of the former DPA240A version, but highly improved in terms of DSP processes and added of an astonishing FIR filtering tool set. LPP240A is a High End 2-IN/4-OUT digital speaker management system which maintains the same outstanding Sound Quality of the former DPA240A version, but highly improved in terms of DSP processes and added of an astonishing FIR filtering tool set. Designed for maximum versatility, it provides all the processing and control necessary for both live and fixed installation use. Proving for any crossover configuration, it offers 2 analog inputs, 4 analog outputs and 1 AES/EBU input, managed by 2 powerful MARANI® DSP Engines, for a full 96kHz processing, in addition to 24 Bit AD/DA Converters. Each input channel provides a choice of a 13-band Parametric EQ, Gain control, Noise Gate, RMS Compressor, Internal White/Pink Noise Generator, and configurable Delay. Each output offers up to 7-band of parametric equalization, in addition to the IIR crossover filters which themselves provide slopes from 6dB/Octave up to 48dB/Octave. Each output path also features PEAK Limiter, RMS Compressor and configurable Delay. Particularly, the Output X-Over Filtering can be selected to be IIR style, with the complete set of Classic Hp/Lp filters (Butterworth, Linkwitz-Railey, Bessel) or FIR, being for each output channel available a 512 taps FIR filter which can be set as Hp/Lp/Bp. On each one of the 2 Input paths, one more 1024 taps Asymmetrical FIR is available for Phase Correction purposes, where the Coefficients Calculation can be supported by an embedded Wizard tool or can be Loaded from external sources as Third Parties Sw for the FIR filters coefficients generation. Being the phase correction FIR Asymmetrical, a powerful tool for adjusting/reducing the FIR latency is available, allowing therefore the LPP240A to be used without any problem also for Live performances still having the Phase correction FIR running together with the eventual FIR for the X-Over implementation in cascade. The LPP240A supports a full set of matrix mixing modes where Input sources can be routed/mixed to the Input paths, inputs paths may be routed/mixed in any ratio to any output and couple of outputs (1/2, 3/4) can be swapped at pleasure.

MDA2-2500P is a highly flexible, powerful and intelligent 2-Channel power amplifier delivering up to a total of 2x2150W @ 4ohms. MDA2-2500P is a highly flexible, powerful and intelligent 2-Channel power amplifier delivering up to a total of 2x2150W @ 4ohms. Designed to meet the most demanding portable and fixed installation sound systems, it provides a full set of value added features such as high output power, efficient cooling system, on board DSP and USB/Ethernet for monitoring and control via PC software. MDA2-2500P includes a highly efficient Switch Mode Power Supply, which provides power to the output stages. The 2 output stages use Class D amplifier module-full bandwidth PWM modulator obtaining ultra low distortion, high efficiency and also equipped with a full set of circuit protections. Furthermore the Clip/Limiter function provides output monitoring to prevent speaker damage with gentle gain reduction at clip threshold, in addition to the efficient heat dissipation system and Over-Heat protection which themselves ensure uncompromised reliability. MDA2-2500P is more than just an amplifier. It is also a capable and sophisticated loudspeaker processor, thanks to its powerful MARANI® DSP running 96 kHz / 24 bit [ 96 bits precision for the internal intermediate processes] and high performance 24bit AD/DA Converters. It offers 2 channels of slope up to 48dB/Oct IIR HP/LP crossover filters, or up to 512 taps FIR filters[FIR coefficients can be imported as .txt/.csv file from external application] , RMS compressor, parametric Eqs , alignment delay and white/pink noise internal generator, everything needed to optimize a loudspeaker system.

MDA4-2000PS is a highly flexible, powerful and intelligent 4-Channel power amplifier delivering up to a total of 4x1700W @ 4 ohms and 4x2320W @ 2 ohms, or able to drive 70V Constant Voltage Lines. MDA4-2000PS is a highly flexible, powerful and intelligent 4-Channel power amplifier delivering up to a total of 4x1700W @ 4 ohms and 4x2320W @ 2 ohms, or able to drive 70V Constant Voltage Lines. Designed to meet the most demanding portable and fixed installation sound systems, it provides a full set of value added features such as high output power, efficient cooling system, on board DSP and USB/Ethernet for monitoring and control via PC software. MDA4-2000PS includes a highly efficient Switch Mode Power Supply, which provides power to the output stages. The 4 output stages use the well-proven Class D module-full bandwith PWM modulator obtaining ultra low distortion, high efficiency and also equipped with a full set of circuit protections. Furthermore the Clip/Limiter function provides output monitoring to prevent speaker damage with gentle gain reduction at clip threshold, in addition to the efficient heat dissipation system and Over-Heat protection which themselves ensure uncompromised reliability. MDA4-2000PS is more than just an amplifier. It is also a capable and sophisticated loudspeaker processor, thanks to its powerful MARANI® DSP running 96 kHz / 24 bit [ 96 bits precision for the internal intermediate processes] and high performance 24bit AD/DA Converters. It offers 4 channels of slope up to 48dB/Oct IIR HP/LP crossover filters, or up to 512 taps FIR filters[FIR coefficients can be imported as .txt/.csv file from external application] , RMS compressor, parametric Eqs , alignment delay and white/pink noise internal generator, everything needed to optimize a loudspeaker system.

MDA4-750PS is a highly flexible, powerful and intelligent 4-Channel power amplifier delivering up to a total of 4x750W @ 4 ohms and 4x870W @ 2 ohms, or able to drive 70V/100v Constant Voltage Lines MDA4-750PS is a highly flexible, powerful and intelligent 4-Channel power amplifier delivering up to a total of 4x750W @ 4 ohms and 4x870W @ 2 ohms, or able to drive 70V/100v Constant Voltage Lines. The 4 output channels can be bridged into 2, and provide 1500W@8ohms power output. Designed to meet the most demanding portable and fixed installation sound systems, it provides a full set of value added features such as high output power, efficient cooling system, on board DSP and USB/Ethernet for monitoring and control via PC software. MDA4-750PS includes a highly efficient Switch Mode Power Supply, which provides power to the output stages. The 4 output stages use the well-proven Class D module-full bandwith PWM modulator obtaining ultra low distortion, high efficiency and also equipped with a full set of circuit protections. Furthermore the Clip/Limiter function provides output monitoring to prevent speaker damage with gentle gain reduction at clip threshold, in addition to the efficient heat dissipation system and Over-Heat protection which themselves ensure uncompromised reliability. MDA4-750PS is more than just an amplifier. It is also a capable and sophisticated loudspeaker processor, thanks to its powerful MARANI® DSP running 96 kHz / 24 bit [ 96 bits precision for the internal intermediate processes] and high performance 24bit AD/DA Converters. It offers 4 channels of slope up to 48dB/Oct IIR HP/LP crossover filters, or up to 512 taps FIR filters[FIR coefficients can be imported as .txt/.csv  file from external application] , RMS compressor, parametric Eqs , alignment delay and white/pink noise internal generator, everything needed to optimize a loudspeaker system.

MDA4-1000M is designed to meet the most demanding portable and fixed installation sound systems, providing a full set of value added features such as efficient cooling system, on board DSP and USB/Ethernet for monitoring and control via PC software.  MDA4-1000M is designed to meet the most demanding portable and fixed installation sound systems, providing a full set of value added features such as efficient cooling system, on board DSP and USB/Ethernet for monitoring and control via PC software. The 4 output stages use the well-proven Pascal Class D SA-2 module, obtaining ultra low distortion, high efficiency and also equipped with a full set of circuit protections. MDA4-1000M is also a capable and sophisticated loudspeaker processor, with powerful M716 DSP running 96 kHz / 24 bit and high performance 24bit AD/DA Converters. It offers 4 channels of slope up to 48dB/Oct IIR HP/LP crossover filters, or up to 512 taps FIR filters[FIR coefficients can be imported as .txt file from external application] , RMS compressor, parametric Eqs , alignment delay and white/pink noise internal generator, everything needed to optimize a loudspeaker system. A 12dB headroom process is available.