Dante-enabled Product Catalog
DANTE interface with 2 inputs and 2 outputs.
Transmitter/Receiver 2IN x 2OUT of DANTE TM . The DD2 is capable of converting up to two mono analog channels to DANTE TM , or converting up to two mono DANTE TM channels to analog.
The DD2 is a device designed to be used in fixed installation, and consists of balanced inputs and outputs with 3.5mm Euroblock connectors.
The device can be powered by both PoE and an external power supply.
Characteristics
Euroblock 3.5 mm connectors for analog signal.
Configurable with DANTE Controller.
External power supply or PoE.
MIX U24 is a complete 20-channel digital mixing system in a compact, rack-sized unit. 20 mix channels with 4 aux sends, 4 subgroups, or 8 aux sends. The new MIX U24 has a processor which executes all the digital processing of the audio signals (32 bit with floating point) allowing programming functions such as copying and loading of parameters or the use of internal plugins such as noise gates, compressor / limiter, phase inversion, delay and even blocking functions.
The signals are worked with a sampling rate of 24 bit resolution and a sampling rate of 48 kHz, in addition, the MIX U24 has in its central part a large 7 "color touch screen from which you can completely control the audio process, assign effects, customize routing etc ... Its 100 mm long fader allows precise control over the channel that is assigned to it, also on the back, the MIX U24 allows connection via USB from other devices such as recording output. Thanks to this USB port and an RJ45, remote control of the unit is possible. For this, it is also necessary to obtain the free MIX U24 app, which allows remote control of the device from an IPad very comfortably.
DD4 devices are gateways used to convert DANTE (Digital Audio Network Through Ethernet - developed by AUDINATE) protocol. These devices allow the extraction of analog audio signals from the DANTETM network as well as the introduction of analog channels within the same network.
DD4 is a device designed for use in installation, for which the analog inputs and outputs are made through Euroblock 3.5mm connectors.
It has balanced inputs and outputs to provide greater immunity to noise that interferes with audio signal lines.
