Dante-enabled Products

• 4K@60 1Gbps AV over IP transmitter in Unicast or Multicast mode.
• IP interface: RJ45
• Supports comprehensive USB over IP functionality (USB flash drive, keyboard and mouse) and seamless collaboration across multiple windows
• Supports PoE-PD (IEEE 802.3af).
• Support IP to IR/ RS-232, converting the IP signal into IR and RS-232 commands for device control.
• Controlled via hotkey, WebGUI, IP Master Controller, and Telnet
• Supports the use of an external control center (IP Master Controller) to provide expanded functionality (Contact your authorized dealer for more information)
• 7 hotkeys dedicated to routing for transmitters and receivers, 4 hotkeys provide single functions, and 3 hotkeys for multiple functions that activates control system
• Supports independent breakaway A/V and control matrix routing
• Supports extension of many audio formats including 8 channel LPCM and standard Bitstream
  • Note: The Line Out only supports LPCM 2.0 sources.
• The analog Line In is automatically embedded in the streaming output and can be independently routed to any receiver
• The Mic In sends audio directly to the analog Line Out on the currently routed transmitter
  • Note: Only available when the transmitter also has its Line In connected.
• Optional Dante ReadyTM is compatible with existing Dante and AES67 audio networks
• Dante Ready brings Dante functionality to products already shipping and installed in sites
• Channels and features can be added as an installation grows

• 4K@60 1Gbps AV over IP transmitter in Unicast or Multicast mode.
• IP interface: RJ45
• Supports comprehensive USB over IP functionality (USB flash drive, keyboard and mouse) and seamless collaboration across multiple windows
• Supports PoE-PD (IEEE 802.3af).
• Support IP to IR/ RS-232, converting the IP signal into IR and RS-232 commands for device control.
• Controlled via WebGUI, IP Master Controller, and Telnet
• 1×HDMI input, 1×HDMI loopback output
• Supports the use of an external control center (IP Master Controller) to provide expanded functionality (Contact your authorized dealer for more information)
• Supports independent breakaway A/V and control matrix routing
• Supports extension of many audio formats including 8 channel LPCM and standard Bitstream
• The analog Line In is automatically embedded in the streaming output and can be independently routed to any receiver
• Optional Dante ReadyTM is compatible with existing Dante and AES67 audio networks
• Dante Ready brings Dante functionality to products already shipping and installed in sites
• Channels and features can be added as an installation grows

• Enables the management and configuration of multiple compatible Video over IP (VoIP) extenders through a single WebGUI
• Supports point-to-point (unicast) and multi-to-multi (multicast) routing selections
• Control over both matrix and TV wall modes using WebGUI presets
• Definable display groups
• WebGUI clearly displays the status of all connected Transmitters and Receivers, including IP address, channel selection, etc.
• HDMI output displays the WebGUI and system status
• Dual LAN ports enable control over VoIP installations that reside on a logically or physically separate network from the standard local network
• Supports the use of a USB mouse and keyboard to locally control the WebGUI

4 Balanced In, Analog Audio to Dante & 4 Balanced Out, Dante to Analog Audio

• Adjustable phantom power from +0V to +48V.
• Easily route audio with 3rd party units in the Dante network.
• May be powered directly by PoE when connected to a Gigabit Ethernet switch that provides PoE (802.3af)

UHD+ 4x2 HDMI Matrix with Dante and Dolby Digital & DTS Stereo Audio Decoder

• Enabled HDMI de-embedded/embedded designed to bridge 2-channel PCM HDMI audio to/from a Dante® audio network. 
• Balance Audio out can be switch between HDMI De-embedded audio or Dante-In source 
• Dante® audio networking utilizes standard IP networks to transmit high-quality, uncompressed audio with near-zero latencay 
• Supports PCM 2Ch, Dolby Digital, Dolby Digital Plus, DTS, DTS-HD, DTS-HD MA formats/Decode (Downmix to 2 Ch) 
• Non-compress audio performance 
• Sample-accurate time alignment between networked devices 
• Real-time latency statistics, Clock status statistics and signal presence exposed to network

4 Balanced In, Analog Audio to Dante & 4 Balanced Out, Dante to Analog Audio

• Adjustable phantom power from +0V to +48V.
• Easily route audio with 3rd party units in the Dante network.
• May be powered directly by PoE when connected to a Gigabit Ethernet switch that provides PoE (802.3af)