Dante-enabled Product Catalog

Part of the DQOR® series, the DQOR® SUB 8 D is a powered installation indoor/outdoor subwoofer with an 8" woofer and a 10" passive radiator. With a built in Dante audio connection, it easily connects to any networked audio system and is AES67 compliant for compatibility with thousands of audio devices.

Designed for high performance in a compact form factor, it delivers powerful bass audio with no need for separate amplifier racks.

Uniquely the DQOR® SUB 8 D is the only outdoor rated Dante sub bass loudspeaker available.

The clean and low-profile design ensures the DQOR® SUB 8 D is a sleek addition to any room, combining aesthetics with powerful audio performance. Rated at 190 W RMS and max power of 230 W, it delivers impressive sound quality at up to 108 dB SPL with low frequency extension down to 37 Hz.

The DQOR® SUB 8 D has rubber feet for floor mounting, or it can be easily installed with the optional surface mount bracket, which includes flexible mounting options, holes for clean cable management, locking screws, a safety-locking mechanism, and a hinge mechanism for quick setup.

AC inputs are connected with a 3-pole phoenix contact terminal block with lever push-in connector for reliable and safe connection of the power cables. Terminal block connectors allow for remote standby control. 

The DQOR® SUB 8 D can be used in a wide variety of applications both inside and outside including hospitality, retail, entertainment, or corporate settings.

It is available in black or white (RAL9005 & RAL9016).

With the X-EDAI Ethernet & Dante Audio Interface expansion card, LD Systems complements the possibilities of the X-ECI Ethernet Control expansion card with a Dante Audio Interface with four inputs and outputs. Thus, X-EDAI offers both remote control and access to the DSP settings of LD Systems IPA DSP installation power amplifiers as well as easy integration of the IPA series into existing Dante audio networks.

In conjunction with LD Systems QUESTRA® software, the X-EDAI interface card provides flexible and effective configuration and control of fixed audio installations of various sizes - whether in hotels, restaurants, shopping centres, sports facilities, office environments and more.

The X-EDAI Ethernet Control expansion card has two IP network ports: While the 100 Mbps Ethernet port provides control and DSP access for the IPA installation power amplifiers, the second port can be used to transmit and receive four incoming and four outgoing Dante audio channels. The configuration and routing of the Dante audio channels is done as standard in the Audinate Dante Controller software.

Furthermore, the X-EDAI expansion card has a status LED and an IP reset button for quick and easy troubleshooting. Thanks to the card's asymmetrical pin arrangement, accidental incorrect installation of the interface card in the IPA housing is impossible.

Via the QUESTRA® software, system integrators can access all DSP settings of the IPA installation power amplifier. The possibilities range from signal processing at the input (preamp, compressor, etc.), signal flow in the matrix mixer, output processing (EQ, dynamics, delay, polarity, mute) to priority settings and preset management. In addition, customised control panels can be created in the QUESTRA® software, which can be used by end customers on smartphones, tablets or computers (via the QUESTRA® Panels app) for convenient control of their system.

Good sound belongs everywhere - in the hotel lobby, in conference rooms, in schools and houses of worship. Demands are constantly increasing, not only in terms of quality, but also in terms of flexibility. Permanently installed and still flexible? This apparent contradiction can be resolved by the IPA Series DSP-based installation amplifiers.

The IPA 424 T is a professional, four-channel installation power amplifier with 4 x 240 watts. While the 70V/100V outputs are equipped with high quality toroidal core transformers, the low impedance 4-Ohm outputs are completely transformerless and guarantee the highest possible audio quality. The DSP functions include, amongst others, a parametric EQ with matching speaker library, dynamic tools, a matrix mixer, priority source selection and delay.

Despite this range of functions, the IPA Series power amps are easy to operate. Important functions such as signal, limit, protection and bridge mode are easily visible via the LEDs on the front panel.

HPF/LPF presets can be enabled directly on the device via DIP switches. The IPA 424 T is already prepared for remote control using future remote panels and paging microphones from LD Systems. The back-panel slot provides expansion card connectivity for additional future-proofing. The Ethernet card offers comprehensive configurability and management via software. The Ethernet+Dante card also offers Dante audio networking capabilities and connection to a wide range of Dante-enabled devices, in order to integrate the IPA 424 T into the Dante network and resolve more complex tasks.

Times are changing; rooms are redivided or rededicated, numbers of attendees increase or decrease based on unforeseen events, but with the IPA Series DSP-supported power amps, your installation is prepared for any situation. Scalability and future-proofing are the biggest advantages of the IPA Series. Its energy efficiency is also ideal thanks to the class-D technology and switchable auto standby.

The IPA 412 T variant with 4 x 120 watts is available for smaller installations.

Good sound belongs everywhere - in the hotel lobby, in conference rooms, in schools and houses of worship. Demands are constantly increasing, not only in terms of quality, but also in terms of flexibility. Permanently installed and still flexible? This apparent contradiction can be resolved by the IPA Series DSP-based installation amplifiers.

The IPA 412 T is a professional, four-channel installation power amplifier with 4 x 120 watts. While the 70V/100V outputs are equipped with high quality toroidal core transformers, the low impedance 4-Ohm outputs are completely transformerless and guarantee the highest possible audio quality. The versatile DSP functions include, amongst others, a parametric EQ with matching speaker library, dynamic tools, a matrix mixer, priority source selection and delay.

Despite this range of functions, the IPA Series power amps are easy to operate. Important functions such as signal, limit, protection and bridge mode are easily visible via the LEDs on the front panel.

HPF/LPF presets can be enabled directly on the device via DIP switches The IPA 412 T is already equipped for remote control using future remote panels and paging microphones from LD Systems. The back-panel slot provides expansion card connectivity for additional future-proofing. The Ethernet card offers comprehensive configuration and management via software. The Ethernet+Dante card also offers Dante audio networking capabilities and connection to a wide range of Dante-enabled devices, in order to integrate the IPA 412 T into the Dante network and resolve more complex tasks.

Times are changing; rooms are redivided or rededicated, numbers of attendees increase or decrease based on unforeseen events, but with the IPA Series DSP-supported power amps, your installation is prepared for any situation. Scalability and future-proofing are the biggest advantages of the IPA Series. Its energy efficiency is also ideal thanks to the class-D technology and switchable auto standby.

The IPA 424 T variant with 4 x 240 watts is available for larger installations.

LD Systems presents the ZONE X1208D 19-inch DSP matrix processor with a wide range of remote control options. Thanks to its hybrid architecture DSP with 40-bit floating point DSP engine the ZONE X1208D allows professional users to load DSP templates to adapt to different installation requirements. In combination with the built-in Event Scheduler, users can create calendar-specific workflow controls and perform automated preset changes. Furthermore it features a REMOTE bus for integration with future LD Systems control panels and Paging microphones. For superior signal flexibility the ZONE X1208D provides 12 balanced mic/line inputs with premium grade microphone preamps and 48 V phantom power selection per input, 8 balanced line outputs, 8 GPI, and 8 GPO logic ports.

At only 1 RU the ZONE X1208D features a clean and intuitive front panel design and is based on the latest generation Linux operating system, enabling remote control via the Xilica Designer universal control software using the integrated Ethernet interface. In addition, dedicated remote control apps for iOS and Android are available to customize the ZONE X1208D user interface to meet individual project needs. The Matrix processor is equipped with integrated Ethernet + Dante card for advanced AoIP applications with 64×64 Dante Audio over IP channels. The Ethernet + Dante card is also optionally available for subsequent upgrading of the ZONE X1208.

LD Systems presents the ZONE X1208 19-inch DSP matrix processor with a wide range of remote control options. Thanks to its hybrid architecture DSP with 40-bit floating point DSP engine the ZONE X1208 allows professional users to load DSP templates to adapt to different installation requirements. In combination with the built-in Event Scheduler, users can create calendar-specific workflow controls and perform automated preset changes. Furthermore it features a REMOTE bus for integration with future LD Systems control panels and Paging microphones. For superior signal flexibility the ZONE X1208 provides 12 balanced mic/line inputs with premium grade microphone preamps and 48 V phantom power selection per input, 8 balanced line outputs, 8 GPI, and 8 GPO logic ports.

At only 1 RU the ZONE X1208 features a clean and intuitive front panel design and is based on the latest generation Linux operating system, enabling remote control via the Xilica Designer universal control software using the integrated Ethernet interface. In addition, dedicated remote control apps for iOS and Android are available to customize the ZONE X1208 user interface to meet individual project needs.

There is an Ethernet + Dante card optionally available for subsequent upgrading of the ZONE X1208 into a Dante-enabled Matrix system.

Designed for the professional audio market, the LD Systems® DSP 44 K power amp was developed in cooperation with Ram Audio, whose products are sold in many countries by Adam Hall Group. Designed for the professional audio market, the LD Systems® DSP 44 K power amp was developed in cooperation with Ram Audio, whose products are sold in many countries by Adam Hall Group. This new powerhouse features a fully-integrated DANTE™ network, a high-performance DSP and controllability via USB and Ethernet using external control PC software. The top-of-the-line power amp can be operated as a two or four-channel device. An impressive four kilowatts provide plenty of power reserves as 4 x 1,000 watts at 4 or 2 ohms or 2 x 2,000 watts (bridge mode) at 8 or 4 ohms. Maximum operational reliability is also guaranteed at 2 ohms. Comprehensive safety features permanently protect the power amps and the system, even in tough situations. FIR/IIR filtering, EQs and crossovers, as well as delay functions, are all part of the overall technology.