Dante-enabled Product Catalog

1CH HDMI 1080P60 Encoder The SC6E0N1 HDMI to IP/UVC v2 allows you to encode one channel of video from an HDMI source to Dante AV-H at 1080p60 resolution. Dante AV-H requires only 100Mbps bandwidth and less than 100ms video transmission delay, which is ideal for intelligent education and webcasting. YUAN ODM’s AV-over-IP solutions that are designed to support various video and audio transmission protocols. You can find solutions for different input interfaces and number of channels. All product lines are supported with a same SDK package.

1CH HDMI2.0 4KP60 Encoder/Decoder The SC6F0N1 HDMI 2.0+ supports 1 channel of Dante AV-H video encoder or decode with 4Kp60 resolution. Dante AV-H requires only 100Mbps bandwidth and less than 100ms video transmission delay, which is ideal for intelligent education and webcasting. YUAN ODM’s AV-over-IP solutions that are designed to support various video and audio transmission protocols. You can find solutions for different input interfaces and number of channels. All product lines are supported with a same SDK package.

4K60 H.26x/Dante AV-H & H.26x Dual-Stream Encoder Card The AMX SVSI NMX-ENC-N3312D-C Encoder Card delivers the highest quality 4K60 H.26x and Dante AV-H video content at the lowest bandwidth. This extends the reach of SVSI 4K60 networked AV solutions to the WAN for streaming, video to desktop, digital signage, set-top boxes, or mobile device applications. · High-quality 4K60 H.26x or Dante AV-H primary stream · High-compatibility H.26x secondary stream · Audinate® Dante AV-H support of up to 4K60 resolutions · Video Preview viewable from the built-in web interface or from a touch panel · Dante Audio · USB 3.0 video recording capability · Support for high security networks · PoE+ powered with low-power mode for energy savings

4K60 H.26x/Dante AV-H Decoder AMX SVSI NMX-DEC-N3322D decoders can decode the highest quality 4K60 H.26x and Dante AV-H video streams output by AMX N3300 encoders or other Dante AV-H cameras, digital signage players, or software. · High-quality 4K60 H.26x Decoding · Audinate® Dante AV-H support · Dante Audio · Support for high security networks · PoE+ powered with low-power mode for energy savings

ANT-37500D is a Dual mode Low Cost Low Power Video Decoder supporting Dante AV-H or RTSP ONVIF and other stream formats. In Dante mode the decoder can be initially setup via the web interface and then fully controlled via Audinates Dante Controller and associated tools/API’s. In alternative mode the decoder can be used to display up to 16 RTSP MPEG-TS or ONVIF video streams in 1×1 , 2×2, 3×3 or 4×4 modes. Powered by USB-C the decoder has a USB-C / Ethernet PoE cable in the box for full PoE applications. The 37500D is the latest decoder product in the ‘SpotBox’ line up and includes new features such as a smaller metal housing with mounting fins and holes pre drilled, PoE options, and USB C power enabling the user to power the box from the monitor. It is a low cost, PC-Less way to view and display Dante AV-H streams up to 4K or Ip camera streams. Future Firmware releases will allow the mixing of Dante and standard streams for PiP quad and other display modes.

Bolin’s D20 Series Dante AV Ultra transceiver device can be programmed as an encoder or a decoder via firmware update. D20 Series is a single channel networked AV over IP transceiver that is fully compatible with Dante audio devices within a Dante ecosystem for HDMI sources up to 4K60Hz 4096 x 2160, with embedded audio and PTZ camera movement control via IP or IR pass-through. It provides audio and video streaming over a standard gigabit network and D20S/D20H models as decoders output baseband video, either HDMI or 12G SDI, to work in professional AV applications. D20H has HDMI 2.0 output only, which provides decoded image to output via HDMI 2.0. Integrated high-performance scaling engine provides scalable encoded source for a wide array of UHD, HD resolutions to match the different capabilities and requirements of sources, displays, codecs, and other equipment.

• Support up to 4K60
• Dante AV-H supported with standard HEVC, and FAST HEVC (Ultra-Low-Latency)
• Fully Compatible with Dante Ecosystem hardware and software
• HDMI 2.0 + 12G-SDI video output
• Dual-Output between HDMI and SDI
• Video up-scalable max from 720 up to 4K60 (UHD)
• All video with audio embedded
• Audio intercom with frontend device
• On-screen character generator
• Firmware upgrade via IP
• POE+ and 12VDC power input

Provide an advanced, complete AVoIP streaming solution for streaming top-quality video and audio in 1GE (1Gbps) networks using JPEG2K-like compression. KDS-17 is perfectly suited to varied spaces and scenarios that demand high-quality video presentation at up to 4K60 4:4:4 with minimal latency – including, command and control centers, meeting rooms, digital signage, auditoriums, active learning, and anywhere there are large screens or video walls. · 4K60 4:4:4 Ultra-high video quality · 2x2 channels of Dante/AES67 audio · USB and HDMI video connectivity · Easy-to-use KM/KVM · Control of large-scale video walls up to 256 screens · Ultra-fast switching of less than 1 second

Provide an advanced, complete AVoIP streaming solution for streaming top-quality video and audio in 1GE (1Gbps) networks using JPEG2K-like compression. KDS-17 is perfectly suited to varied spaces and scenarios that demand high-quality video presentation at up to 4K60 4:4:4 with minimal latency – including, command and control centers, meeting rooms, digital signage, auditoriums, active learning, and anywhere there are large screens or video walls. · 4K60 4:4:4 Ultra-high video quality · 2x2 channels of Dante/AES67 audio · USB and HDMI video connectivity · Easy-to-use KM/KVM · Control of large-scale video walls up to 256 screens · Ultra-fast switching of less than 1 second

OIP-N60D Dante AV-H is a low latency 4K video over IP Bridge. The device receives IP streams from sources including encoders, IP cameras and playout servers. OIP-N60D Dante AV-H supports multiple streaming standards including Dante AV-H and Dante audio. Users can select and switch between IP sources using the web UI, and output video via HDMI and USB. • Decodes Dante AV-H & RTSP with HDMI and USB out • Supports bi-directional Dante audio • Delivers low latency 4K video • Long-distance IP-based AV transmission • Supports PoE and USB power for easy installation

ADTECHNO Dante AV Ultra Encoders and Decoders are the award-winning AV over IP product, powered by the Dante AV Ultra solution, allowing for lossless 4K Ultra HD video and extremely low-latency IP streaming over 1GbE network. It utilizes ProAV-optimized Colibri codec, preserving high-quality graphical content for 4K60 with perfect video and audio synchronization. Both the encoder and decoder come equipped with a 2.0-inch IPS screen, offering a preview of incoming video images, up to 8 channels of audio level meters, and Dante setting features.

• Up to 4K Ultra HD 60p 4:4:4
• HDR 10 & HLG
• HDMI 2.0a in and loop-out
• 1GbE PoE+ and Secondary 1GbE IP
• USB HID, IR in/out and RS-422 (VISCA)

Decode Dante AV Ultra to HDMI ADTECHNO Dante AV Ultra Encoders and Decoders are the award-winning AV over IP product, powered by the Dante AV Ultra solution, allowing for lossless 4K Ultra HD video and extremely low-latency IP streaming over 1GbE network. It utilizes ProAV-optimized Colibri codec, preserving high-quality graphical content for 4K60 with perfect video and audio synchronization. Both the encoder and decoder come equipped with a 2.0-inch IPS screen, offering a preview of incoming video images, up to 8 channels of audio level meters, and Dante setting features.

• Up to 4K Ultra HD 60p 4:4:4
• HDR 10 & HLG
• Simultaneous 2 x HDMI out
• Auto-Downscaling and HDCP conversion
• 1GbE PoE+ and Secondary 1GbE IP
• USB HID, IR in/out and RS-422 (VISCA)

Decode Dante AV Ultra to 12G-SDI/HDMI ADTECHNO Dante AV Ultra Encoders and Decoders are the award-winning AV over IP product, powered by the Dante AV Ultra solution, allowing for lossless 4K Ultra HD video and extremely low-latency IP streaming over 1GbE network. It utilizes ProAV-optimized Colibri codec, preserving high-quality graphical content for 4K60 with perfect video and audio synchronization. Both the encoder and decoder come equipped with a 2.0-inch IPS screen, offering a preview of incoming video images, up to 8 channels of audio level meters, and Dante setting features.

• Up to 4K Ultra HD 60p 4:4:4
• HDR 10 & HLG
• Simultaneous 2 x 12G-SDI and 2 x HDMI out
• Auto-downscaling and HDCP conversion
• 1GbE PoE+ and Secondary 1GbE IP
• USB HID, IR in/out and RS-422 (VISCA)

Encode 12G-SDI/HDMI to Dante AV Ultra ADTECHNO Dante AV Ultra Encoders and Decoders are the award-winning AV over IP product, powered by the Dante AV Ultra solution, allowing for lossless 4K Ultra HD video and extremely low-latency IP streaming over 1GbE network. It utilizes ProAV-optimized Colibri codec, preserving high-quality graphical content for 4K60 with perfect video and audio synchronization. Both the encoder and decoder come equipped with a 2.0-inch IPS screen, offering a preview of incoming video images, up to 8 channels of audio level meters, and Dante setting features.

• Up to 4K Ultra HD 60p 4:4:4
• HDR 10 & HLG
• 12G-SDI in and loop-out
• HDMI 2.0a in and loop-out
• 1GbE PoE+ and Secondary 1GbE IP
• USB HID, IR in/out and RS-422 (VISCA)

MWC 4K60 4:4:4 & H.26x 1080p Multi-Codec, Dual-Stream Encoder The AMX SVSI NMX-ENC-N2612S is a cost-effective, powerfully robust multi-codec, dual-stream encoder in a stand-alone box form factor. It features a high-quality, low-latency 4K60 4:4:4 MWC codec that is ideal for encoding both live video and detailed content in classrooms, meeting spaces, courtrooms, bars, and other applications. · High-Quality, Low-Latency 4K60 MWC encoding · High-Compatibility, Low-Bandwidth 1080p H.26x encoding · Video Preview viewable from the built-in web interface or from a touch panel · Dante Audio · USB 2.0 Transport · High security network support and features, including multicast, VLAN tagging and QoS · PoE+ powered with low-power mode for energy savings · Open Direct-Control API

MWC 4K60 4:4:4 & H.26x 1080p Multi-Codec Decoder The AMX SVSI NMX-DEC-N2622S is a cost-effective, powerfully robust multi-codec decoder in a stand-alone box form factor. It can decode the high-quality, low-latency 4K60 4:4:4 MWC codec output by N2600 encoders that is ideal for streaming both live video and detailed content in classrooms, meeting spaces, courtrooms, bars, and other applications. · High-Quality, Low-Latency 4K60 MWC decoding · High-Compatibility, Low-Bandwidth 1080p H.26x decoding · Video Preview viewable from the built-in web interface or from a touch panel · Dante Audio · USB 2.0 Transport · High security network support and features, including multicast, VLAN tagging and QoS · PoE+ powered with low-power mode for energy savings · Open Direct-Control API

MWC 4K60 4:4:4 & H.26x 1080p Multi-Codec, Dual-Stream Encoder Card The AMX SVSI NMX-ENC-N2612S-C is a cost-effective, powerfully robust multi-codec, dual-stream encoder card. It features a high-quality, low-latency 4K60 4:4:4 MWC codec that is ideal for decoding both live video and detailed content in classrooms, meeting spaces, courtrooms, bars, and other applications.

• High-Quality, Low-Latency 4K60 MWC encoding
• High-Compatibility, Low-Bandwidth 1080p H.26x encoding
• Video Preview viewable from the built-in web interface or from a touch panel
• Dante Audio
• USB 2.0 Transport
• High security network support and features, including multicast, VLAN tagging and QoS
• PoE+ powered with low-power mode for energy savings
• Open Direct-Control API

4K60 H.26x/Dante AV-H & H.26x Dual-Stream Encoder The AMX SVSI NMX-ENC-N3312D Encoder delivers the highest quality 4K60 H.26x and Dante AV-H video content at the lowest bandwidth. This extends the reach of SVSI 4K60 networked AV solutions to the WAN for streaming, video to desktop, digital signage, set-top boxes, or mobile device applications. Hybrid learning applications will especially benefit from the significant cost savings of simultaneous dual-stream encoding and local recording to an external USB 3.0 drive. · High-quality 4K60 H.26x or Dante AV-H primary stream · High-compatibility H.26x secondary stream · Audinate® Dante AV-H support of up to 4K60 resolutions · Video Preview viewable from the built-in web interface or from a touch panel · Dante Audio · USB 3.0 video recording capability · Support for high security networks · PoE+ powered with low-power mode for energy savings

The Dante 2-Channel Analog Audio Decoder (Model: 500552) is designed to receive digital audio signals from Dante-compliant equipment, then decode and output them as analog audio signals. The unit supports balanced or unbalanced audio output and 3 level gain adjustment. It can be powered using either PoE from any PoE network switch or via local with a 12v power supply.

The Dante 2-Channel USB Audio Encoder/Decoder (Model: 500550) is designed to both encode 2ch USB audio to a Dante digital signal, and decode a Dante digital signal to 2chUSB audio. The unit is plug & play and can be powered using either PoE from any PoE network switch or via 5V from the USB device; In addition, the product is compact and easy to carry.

The AJA Dante AV 4K-T utilizes the revolutionary new Dante AV Ultra solution for standard 1 Gbps networks that enables manufacturers to add networked video to the industry leading Dante audio-over-IP platform. This Dante AV 4K-T encoder will convert up to 4K/UltraHD 12G-SDI and HDMI 2.0 to Dante AV Ultra signals. Dante AV provides ease-of-use, seamless multi-vendor interoperability, and integrated control experience that customers have come to expect from AJA Video and Dante by Audinate.

Encode 12G / HDMI video with embedded audio into Dante AV Ultra Dante AV

• Ultra Transmitter
• Video Codec: JPEG 2000
• 4K/UltraHD/2K/HD/VESA
• 12G-SDI and HDMI 2.0 In
• 1 GigE POE+ IP
• Compatible with Dante Controller software for routing Video, Audio, KVM, VISCA, and IR

The AJA Dante AV 4K-R, utilizes the revolutionary new Dante AV Ultra solution for standard 1 Gbps networks that enables manufacturers to add networked video to the industry leading Dante audio-over-IP platform. The Dante AV 4K-R decoder will convert Dante AV Ultra signals up to 4K/UltraHD 12G-SDI and HDMI 2.0. Dante AV provides ease-of-use,

seamless multi-vendor interoperability, and integrated control experience that customers have come to expect from AJA Video and Dante by Audinate.

• Decode Dante AV Ultra into 12G / HDMI video with embedded audio
• Dante AV Ultra Receiver
• Video Codec: JPEG 2000
• 4K/UltraHD/2K/HD/VESA
• 12G-SDI and HDMI 2.0 Out
• 1 GigE POE+ IP
• Compatible with Dante Controller software for routing Video, Audio, KVM, VISCA, and IR

1CH HDMI 2.0 4KP60 DECODER

The SC6E0N1 IP to HDMI 2.0 allows you to decode one channel Dante AV-H video at 4Kp60 resolution to HDMI 2.0. Dante AV-H requires only 100Mbps bandwidth and less than 100ms video transmission delay, which is ideal for intelligent education and webcasting.

YUAN ODM’s AV-over-IP solutions that are designed to support various video and audio transmission protocols. You can find solutions for different input interfaces and number of channels. All product lines are supported with a same SDK package.

1CH SDI+HDMI 1080P60 ENCODER+DECODER

The SC6E0N1 AIO Lite supports 1 channel of Dante AV-H video encode or decode with 1080p60 resolution. Dante AV-H requires only 100Mbps bandwidth and less than 100ms video transmission delay, which is ideal for intelligent education and webcasting.

YUAN ODM’s AV-over-IP solutions that are designed to support various video and audio transmission protocols. You can find solutions for different input interfaces and number of channels. All product lines are supported with a same SDK package.

MondeF 32-zone network audio server (Dante®) for professionally streaming Dante® audio data. Equipped with 32 Dante® outputs, 16 Dante® inputs. The server is completely pre-configured with MondeF software, drivers and the Audinate Dante® software for use with Dante® audio products.

The installed software includes Internet radio (120 channels max. simultaneously), announcement feature, (programmable) alarms/announcements, scheduling, playlists etc.

Furthermore, the server provides a variety of connection facilities, such as USB (4 x), RJ45 network connection, HDMI™ output and DisplayPort for connecting up to 2 optional monitors or touch screens, thus allowing for a convenient operation of all network components.

MondeF 32-zone network audio server (Dante®)

32 Dante® outputs

16 Dante® inputs

Completely pre-configured, including installed software and drivers

Mini server, slim design, slimline plastic housing

Operating system: Windows 10 Professional, 64-bit version

Intel Celeron 3865U processor, 1.8 GHz, Intel HD610 Graphics, supports 2160p/60 Hz

Wireless LAN 802.11n, internal antenna

Can be mounted as a wall device/desktop device or directly to the rear side of a monitor/touch screen (VESA mount)

Supplied with power supply, supporting feet and VESA mount (75/100 mm)

The brand Dante® as well as the Dante® software which may have been integrated into these products are licenced by Audinate Pty Ltd.

MondeF 2-zone network audio server (Dante®) for professionally streaming Dante® audio data. Equipped with 2 Dante® outputs, 8 Dante® inputs. The server is completely pre-configured with MondeF software, drivers and the Audinate Dante® software for use with Dante® audio products.

The installed software includes Internet radio (120 channels max. simultaneously), announcement feature, (programmable) alarms/announcements, scheduling, playlists etc.

Furthermore, the server provides a variety of connection facilities, such as USB (4 x), RJ45 network connection, HDMI™ output and DisplayPort for connecting up to 2 optional monitors or touch screens, thus allowing for a convenient operation of all network components.

MondeF 2-zone network audio server (Dante®)

2 Dante® outputs

8 Dante® inputs

Completely pre-configured, including installed software and drivers

Miniature server, slimline design, flat plastic housing

Operating system: Windows 10 Professional, 64-bit

Processor: Intel Celeron 3865U, 1.8 GHz, Intel HD Graphics 610, supports 2160p/60 Hz

Wireless LAN 802.11n, internal antenna

Can be mounted either as a wall/tabletop unit or directly on the rear of the monitor/touch screen (VESA mount)

Supplied with power supply, supporting feet and VESA mount (75/100 mm)

The brand Dante® as well as the Dante® software which may have been integrated into these products are licenced by Audinate Pty Ltd.

Quantum MC is a 1U rack mount IP audio codec extending the Quantum product family.

Quantum MC is a Multi-Channel IP codec for bridging phase-locked 5.1 audio signals over Internet between two such devices. (This is 6 phase-locked mono audios).

Alternatively this product might be used for an efficient low delay bidirectional bridge of 6 voices/audios between two production sites.

Quantum MC fully supports IP (TCP and UDP). This enables remote monitoring/configuring and data/audio transportation over data communications links (LAN, WAN, 3G/4G, Internet…)

This unit can be controlled from its built-in web graphical interface, its front panel display menu, or from the ProdysControlPlus application.