KDS-17 EN

Product Information

Provide an advanced, complete AVoIP streaming solution for streaming top-quality video and audio in 1GE (1Gbps) networks using JPEG2K-like compression. KDS-17 is perfectly suited to varied spaces and scenarios that demand high-quality video presentation at up to 4K60 4:4:4 with minimal latency – including, command and control centers, meeting rooms, digital signage, auditoriums, active learning, and anywhere there are large screens or video walls.

· 4K60 4:4:4 Ultra-high video quality

· 2×2 channels of Dante/AES67 audio

· USB and HDMI video connectivity

· Easy-to-use KM/KVM

· Control of large-scale video walls up to 256 screens

· Ultra-fast switching of less than 1 second

Specifications

Dante Ch: 2x2
Dante AV Enabled
AES67 Enabled

ANT-37500D 4K Decoder

ANT-37500D is a Dual mode Low Cost Low Power Video Decoder supporting Dante AV-H or RTSP ONVIF and other stream formats. In Dante mode the decoder can be initially setup via the web interface and then fully controlled via Audinates Dante Controller and associated tools/API’s. In alternative mode the decoder can be used to display up to 16 RTSP MPEG-TS or ONVIF video streams in 1×1 , 2×2, 3×3 or 4×4 modes. Powered by USB-C the decoder has a USB-C / Ethernet PoE cable in the box for full PoE applications. The 37500D is the latest decoder product in the ‘SpotBox’ line up and includes new features such as a smaller metal housing with mounting fins and holes pre drilled, PoE options, and USB C power enabling the user to power the box from the monitor. It is a low cost, PC-Less way to view and display Dante AV-H streams up to 4K or Ip camera streams. Future Firmware releases will allow the mixing of Dante and standard streams for PiP quad and other display modes.

AV Encoders & Decoders

See the product

ZenWin

AV-R

Features:

1x network RJ45 interface -1 GigE (Dante AV&POE+).
1x HDMI 2.0 input (4K-T) or 1x HDMI 2.0 output (4K-R): RGB, YCbCr, 4:4:4, 4:2:2, 8-bit, 10-bit, And 12 bit.
Supports 8-channel embedded DANTE audio through HDMI input/output.
Power supply: 12VDC and POE (+)
1x 3PIN Phoenix socket (serial port).
2x USB 2.0 Type C interface.
The front LED indicator lights can display: power supply, codec, system, status, synchronization, and HDCP.
Supports complete EDID.
HDCP processing.

AV Encoders & Decoders

Dante AV Enabled

See the product

TiGHT AV

TNET-DEC-H211-DA Decoder

The TNET-DEC-H211-DA AVoIP decoder is the perfect complement to our new line of encoders: The H101-DA and the C211-DA. The TNET-DEC-H211-DA features a built-in scaler for full flexibility and a local HDMI input for use with digital signage players or room PCs. Key Features: · Built-in scaler for full flexibility · Local HDMI input for digital signage players or room PCs · 4K60 1G Ethernet with subframe latency · Dual LAN ports with PoE/PoE+ pass-through · VLAN tagging support · USB host port · HDMI loop output · Audio embedding/de-embedding · 2x2 CH Dante Audio break-in/out · LED display for easy installation and troubleshooting · Video Wall up to 16x16 with Mosaic configuration support · USB 2.0 transport and routing/ Mouse Roaming in Video Wall mode · Built-in WEB UI for configuration and setup · Open direct-control API · Compatible with Dante Controller & Dante Domain Manager · Proprietary software for management and mass deployment

AV Encoders & Decoders

Dante Ch: 2x2
24-bit

See the product

KDS-17 EN

Product Information

Specifications

Similar Products

ANT-37500D 4K Decoder

AV-R

TNET-DEC-H211-DA Decoder

Stay connected to Dante

Support

Company

Dante Networking Alliance