Cart
← Back to Product Catalog

ASI5752 Dante sound card

Dante Interface Cards

More details

Similar Products

KS_audio_d-mod-front
  • KS Audio

KS Audio – D Mod

The 4-channel loudspeaker controller module with digital signal processing for amplifiers of the KS AUDIO series

CA 4D and TA 4D. A unique convincing solution for perfect sound and easiest handling. The KS D MOD controller module complements the F MOD modules for applications where no quick change of the loudspeaker systems is required - i.e. especially in the installation area.

The one-time configuration of the loudspeaker system is done on the module by a USB stick transmitting the data while the system is switched on. During that process, both the signal inputs and the power outputs automatically receive the correct function:

from four individual channels

via two channels in Bi-Amp

or high-power bridge mode

to a single-channel 3-way active loudspeaker system with woofer-bridge mode output, and optionally “BI-Amp” control.

a SAT mode is also available in which the L+R signal is summed up to mono sub-low.

In addition to digital signal processing with FIR filter tech- nology, the special feature of the D MOD is its complete operability and controllability via standard networks. An integrated gigabit switch allows daisy-chaining to the next device. The KS REMOTE PC software enables easy ma- nagement and graphically, easy to understand, operation of an unlimited number of controller amplifiers arranged in groups.

All inputs can be controlled either digitally or analogously. Simultaneous digital and analog operation is also possible. A network-audio transmission using DANTETM protocol is available as an option.

Despite the many new possibilities and state-of-the-art technology, the D MOD can replace an existing analog or digital controller by simple front-panel installation. This puts your public address system back on the cutting edge of technology.

    Dante Interface Cards
See the product
RL-DRN2ML
  • RDL

RDL RN2ML

The D-RN2ML is a complete wall-mounted Dante or AES67 audio network interface. It features one XLR mic or line input on the front panel, one stereo Mini-jack line-level input summed to mono on the front panel and two balanced line outputs on a rear-panel detachable wiring block. The module is configured and adjusted using RDL CONSOLE or other network control software. The D-RN2ML fits a standard US single-gang electrical box or can be used with the RDL EP-1 adaptor for mounting in EU/UK square back boxes with 60 mm distance screw hole mounting centers. The D-RN2ML is PoE powered and is available in multiple finishes with optional customized graphics.
    Dante Interface Cards
  • Dante Ch: 2x2
  • 24-bit
See the product
Prism-dante-mdio-board
  • Prism Sound

Prism Sound – MDIO-Dante

The DANTE module allows multiple Titan or Atlas units to be connected directly to a DANTE equipped network.   The DANTE module allows multiple Titan or Atlas units to be connected directly to a DANTE equipped network. With this setup, DANTE users can enjoy the excellent sound quality of both the Titan and Atlas A/D and D/A converters, and their equally well regarded on-board microphone preamplifiers. Titan was recently rated 'the pinnacle of USB recording' with 'fantastic converters and mic pre's' by John Gatski, of Everything Audio Network.  Control of the Prism Sound Titan or Atlas units when connected to DANTE is easy. When connected over a network the units are controlled using a dedicated software app that is available for both Mac and Windows. This enables you to control the units from any computer on the network or via its dedicated USB port. The set up information can be stored for instant recall within the dedicated app unlike many third party interfaces whose settings cannot be recalled.  
 
    Dante Interface Cards
See the product