Dante-enabled Product Catalog
The PRF75D is an active headphone amplifier, because of its design this active headphone amplifier is very easily integrable under the studio furniture, without making cuts on the board.
- Communication is provided by an RJ45 network cable, with both audio information and power (PoE)
- The PRF75 D manages 5 DANTE audio channels as input:
• The left channel for the headphone amplifier
• The right channel for the headphone amplifier
• The left channel for audio monitor output
• The right channel for audio monitor output
• The Talkback channel for talkbacks to headphones
- PRF75D is equipped with DANTE Primary port and DANTE Secondary port (Back up).
- The headphone output can be done on the front panel as well as on the rear panel for a possible deporting of the headphones.
- Monitor output allows you to connect a pair of monitor active speakers
The PCS310 is a built-in headphone amplifier with DANTE connectivity.
Communication is via an RJ45 network cable, carrying both audio information and power (PoE).
The headphone output is on the front panel.
The PCS310 manages 2 DANTE audio channels as input:
• The left channel for the headphone amplifier.
• The right channel for the headphone amplifier.
Applications:
PCS310 is very useful in the "SPEAK" studios as the presenter and his guests need reception headphones.
The PRT666D is a multifunctional microphone desk with Dante connectivity. It has been studied to answer many uses in mobile or permanent installation. It includes:
• A microphone preamp with very low noise, adjustment of the sensitivity and 12 or 48 Volts phantom power.
• An ON / OFF switch for setting ON AIR with a loop confirmation on GPO opto Mos.
• An external switching for ON / AIR by GPI.
• Two switches Talkback 1 and 2 with a confirmation loop on GPO opto coupler.
The communication is provided by an RJ45 network cable, conveying both the audio information and the power supply (PoE).
The PRT666D has a DANTE Primary port and a DANTE Secondary port (Backup).
Applications:
• Commentator desk
• Remote reporter desk in an outdoor event.
• Antenna simultaneous translation console.
- Personal Mixing & Monitoring
The JOKER is a three-commentator unit. It includes all the features needed for sports commentators, such as making the antenna, sends and returns as well as monitoring talkback individually configurable.
The JOKER has an IP port and an embedded web server. This allows both the specific programming of the equipment in controls and secondly to take control of remote commands, without specific software.
• Three microphones inputs on balanced XLR, two commentators and a guest, with a phantom power supply 12 or 48 volts.
• “HELP MODE“ for talking to support engineer.
• Luminous ON AIR switches for the three inputs.
• Luminous switch to send Talback A and B for commentators 1 and 2 inputs.
• ON AIR output is muted when one of the talkback switch is pressed.
• The JOKER offers inputs/outputs (GPI/GPO) on a Sub-D 15 pin connector.
• IP mode even allows use in stand-alone.
