Dante-enabled Product Catalog
The CMX DANTE-A6 is a 6.5" 2-way Dante loudspeaker.
- Self-powered network loudspeaker.
- Ethernet and RS-232 control.
- Dante™ Network Audio Interface.
- 13-Ply Russia birch apply/15mm Russia birch plywood.
- Full integration with other Dante™ enabled mixer, amplifier and controller.
- Ultra-light voice coil and top class driver units for acoustic optimization.
- 90°x 60° of horizontal and vertical wide angle dispersion.
- Heavy duty structure suitable for long year application.
- Versatile hanging mount, floor stand or wall mount installation.
The CMX DANTE-A8 is am 8" 2-way Dante Loudspeaker.
- Self-powered network loudspeaker.
- Ethernet and RS-232 control.
- Dante™ Network Audio Interface.
- 13-Ply Russia birch apply/15mm Russia birch plywood.
- Full integration with other Dante™ enabled mixer, amplifier and controller.
- Ultra-light voice coil and top class driver units for acoustic optimization.
- 90°x 60° of horizontal and vertical wide angle dispersion.
- Heavy duty structure suitable for long year application.
- Versatile hanging mount, floor stand or wall mount installation.
The CMX DANTE-A10 is a 10" 2-way Dante Loudspeaker.
- Self-powered network loudspeaker.
- Ethernet and RS-232 control.
- Dante™ Network Audio Interface.
- 13-Ply Russia birch apply/15mm Russia birch plywood.
- Full integration with other Dante™ enabled mixer, amplifier and controller.
- Ultra-light voice coil and top class driver units for acoustic optimization.
- 90°x 60° of horizontal and vertical wide angle dispersion.
- Heavy duty structure suitable for long year application.
- Versatile hanging mount, floor stand or wall mount installation.
The CMX DANTE-A12 is a 12" 2-way Dante Loudspeaker.
- Self-powered network loudspeaker.
- Ethernet and RS-232 control.
- Dante™ Network Audio Interface.
- 13-Ply Russia birch apply/15mm Russia birch plywood.
- Full integration with other Dante™ enabled mixer, amplifier and controller.
- Ultra-light voice coil and top class driver units for acoustic optimization.
- 90°x 60° of horizontal and vertical wide angle dispersion.
- Heavy duty structure suitable for long year application.
- Versatile hanging mount, floor stand or wall mount installation.
The CMX DSP-4060 is a power amplifier with DSP and Dante.
- 4 x 60W power amplifier
- 100V, 70V, 4 Ohm & 8 Ohm output with selectors
- Built-in DSP with EQ, gain control, crossover, delay, limiter, high-pass filter & low-cut filter
- Dante network control with 4 In 4 Out matrix
- Two Ethernet RJ-45 network connector for both Dante and DSP configure
- Remote GPIO for failure outputs
- 1U height 19” rack mount type power amplifier
- Balanced line input by phoenix connector for four channels.
- Each four inputs with separate gain control.
- Separate four channel indicators for protection, clip, input and output.
- Complete short circuit, overload, high temp, clip and DC protection.
- Dante increases connectivity flexibility, and provides the freedom to use the amplifier power away from the source, wherever it is needed. It also enables the models to allow mixed inputs using either digital or onboard analog audio connections
The CMX DSP-4120 is a power amplifier with DSP and Dante.
- 4 x 60W power amplifier
- 100V, 70V, 4 Ohm & 8 Ohm output with selectors
- Built-in DSP with EQ, gain control, crossover, delay, limiter, high-pass filter & low-cut filter
- Dante network control with 4 In 4 Out matrix
- Two Ethernet RJ-45 network connector for both Dante and DSP configure
- Remote GPIO for failure outputs
- 1U height 19” rack mount type power amplifier
- Balanced line input by phoenix connector for four channels.
- Each four inputs with separate gain control.
- Separate four channel indicators for protection, clip, input and output.
- Complete short circuit, overload, high temp, clip and DC protection.
- Dante increases connectivity flexibility, and provides the freedom to use the amplifier power away from the source, wherever it is needed. It also enables the models to allow mixed inputs using either digital or onboard analog audio connections
The CMX DSP-4240 is a power amplifier with DSP and Dante.
- 4 x 60W power amplifier
- 100V, 70V, 4 Ohm & 8 Ohm output with selectors
- Built-in DSP with EQ, gain control, crossover, delay, limiter, high-pass filter & low-cut filter
- Dante network control with 4 In 4 Out matrix
- Two Ethernet RJ-45 network connector for both Dante and DSP configure
- Remote GPIO for failure outputs
- 1U height 19” rack mount type power amplifier
- Balanced line input by phoenix connector for four channels.
- Each four inputs with separate gain control.
- Separate four channel indicators for protection, clip, input and output.
- Complete short circuit, overload, high temp, clip and DC protection.
- Dante increases connectivity flexibility, and provides the freedom to use the amplifier power away from the source, wherever it is needed. It also enables the models to allow mixed inputs using either digital or onboard analog audio connections
The CMX DSP-4350 is a power amplifier with DSP and Dante.
- 4 x 60W power amplifier
- 100V, 70V, 4 Ohm & 8 Ohm output with selectors
- Built-in DSP with EQ, gain control, crossover, delay, limiter, high-pass filter & low-cut filter
- Dante network control with 4 In 4 Out matrix
- Two Ethernet RJ-45 network connector for both Dante and DSP configure
- Remote GPIO for failure outputs
- 1U height 19” rack mount type power amplifier
- Balanced line input by phoenix connector for four channels.
- Each four inputs with separate gain control.
- Separate four channel indicators for protection, clip, input and output.
- Complete short circuit, overload, high temp, clip and DC protection.
- Dante increases connectivity flexibility, and provides the freedom to use the amplifier power away from the source, wherever it is needed. It also enables the models to allow mixed inputs using either digital or onboard analog audio connections
The CMX DSP-4500 is a power amplifier with DSP and Dante.
- 4 x 60W power amplifier
- 100V, 70V, 4 Ohm & 8 Ohm output with selectors
- Built-in DSP with EQ, gain control, crossover, delay, limiter, high-pass filter & low-cut filter
- Dante network control with 4 In 4 Out matrix
- Two Ethernet RJ-45 network connector for both Dante and DSP configure
- Remote GPIO for failure outputs
- 1U height 19” rack mount type power amplifier
- Balanced line input by phoenix connector for four channels.
- Each four inputs with separate gain control.
- Separate four channel indicators for protection, clip, input and output.
- Complete short circuit, overload, high temp, clip and DC protection.
- Dante increases connectivity flexibility, and provides the freedom to use the amplifier power away from the source, wherever it is needed. It also enables the models to allow mixed inputs using either digital or onboard analog audio connections
