Dante-enabled Products

The 1U CM-DF64 provides optical fibre MegaCOMMS connections and compliments the existing CM-DT64 coaxial Dante bridge. Both CM-DF64 and DT64 offer simple configuration via the Dante Controller and two Dante Ethernet network ports, at 48 kHz or 96 kHz, and both have dual onboard PSUs. The CM-RT12 router, together with the CM-DF64 optical Dante bridge – also being shown for the first time – sees a significant expansion of the CM ecosystem.

The CM-RT12 router provides the CM-Series with enhanced network performance capabilities. With a processing capacity of up to 3072 channels, a single CM-RT12 can connect up to 12 MegaCOMMS units to form a single unified audio system, comprising any combination of CM-J50 consoles, CM-SR stage racks, or CM fibre bridges. The CM-RT12 offers true redundancy when two units are linked in parallel, with the router automatically able to switch between individual ports or even complete units, ensuring uninterrupted audio performance. As with all current CM products dual onboard PSUs provide for peace of mind, and the unit is surprisingly light-weight and compact, housed in a 2U aluminium chassis weighing just 3.2kg.  

The X115 is a self-powered 2-way high-end cardioid subwoofer, which features 1 x 15" ported woofer at the front and 1 x 12" ported woofer at the rear side. The power output of 4000 W (RMS) ensures for very high SPL down to a frequency of 35 Hz. The subwoofer features a unique software controllable cardioid radiation pattern. The cardioid disperson avoids unwanted energy behind the system and reduces the reveberant field at low frequencies while providing highest accuracy in low frequency sound emission. The combination of mapping optimization and direct cardioid radition pattern denition is the most comprehensive and powerful loudspeaker management system on the market. The X115 can be combined with all products of the CADAC beam forming range. It can be used as ground stack horizontal subwoofer array as well as flown together with the X310 or X606 system in large venues for very high SPL demands in concert applications. Internally, one X115 has 2 amplifier and 2 DSP channels. The CADAC DSP-core module platform is integrated with the amplifier section into the loudspeaker. Cabinets are electrically connected by the CADAC C-Link audio and command interface. The CCP control and prediction software can connect to the array via LAN for command and control, Auto- EQ and to calculate sound prediction on listener areas. With the CMAP (mapping optimization mode), the vertical dispersion can be adjusted and optimized according to the listener area. Due to the fully integrated connection hardware, the subwoofer can be arrayed to realize larger systems with up to 7.2 meters of acoustic length.

The X310 beam forming array module combines a comprehensive package in all relevant disciplines without compromise. With the X310, even at most demanding and complex sound installations can be realized. The combination of mapping optimization and direct array definition is the most comprehensive and powerful loudspeaker management system on the market. The X310 is a self-powered 3-way high-end beam forming array loudspeaker, which features 3 x 10" ported woofers for LF, 6 x 5" woofers for the MF and 13 x 1" compression drivers for the HF, which are mounted onto waveguide horns. The X310 can be used as single cabinet with programmable vertical dispersion (point source functionality) and as beamforming array for fixed installation as well as for mobile applications. If one X310 is combined with one X310-CARDIOID cabinet, the system will have cardioid dispersion for the LF range. The array is used as straight line in most applications as the coverage on listener areas is adjusted by beamforming. Due to the fully integrated connection hardware, the cabinet can be stacked to realize larger systems with up to 10 meters of acoustic length. With the small source distances, the beamforming capabilities of the column are excellent even at very high frequencies. Internally, one X310 has 22 amplifier and 22 DSP channels. The CADAC DSP-core module platform is integrated with the amplifier section into the loudspeaker. Cabinets are electrically connected by the CADAC C-Link audio and command interface. The CCP control and prediction software can connect to the array via LAN for command and control, Auto-EQ and to calculate sound prediction on listener areas. With the CMAP (mapping optimization mode), the vertical dispersion can be adjusted and optimized according to the listener area.

The X310 CARDIOID is a self-powered 3-channel high-end cardioid subwoofer, which features 3 x 10" ported woofers and unique software controllable cardioid radiation pattern. The power output of 1500 W (RMS) ensures for very high SPL down to a frequency of 60 Hz. The cardioid disperson avoids unwanted energy behind the system and reduces the reveberant field at low frequencies while providing highest accuracy in low frequency sound emission. The combination of mapping optimization and direct cardioid radition pattern definition is the most comprehensive and powerful loudspeaker management system on the market. It is seamlessly constructed into the software, cabling and connection concept. The cabinet can be used as a cardioid extension or normal LF extension for the X310. It shares the same outer dimensions and flyware and can be own together with the X310 as one line like conventional LF extensions or flown behind the X310 with the cardoid flying frame to set up a beamforming cardoid line array system. Due to the fully integrated connection hardware, the subwoofer can be stacked to realize larger systems with up to 10 meters of acoustic length. Internally, one X310 CARDIOID has 3 amplifier and 3 DSP channels. The CADAC DSP-core module platform is integrated with the amplifier section into the loudspeaker. Cabinets are electrically connected by the CADAC C-Link audio and command interface. The CCP control and prediction software can connect to the array via LAN for command and control, Auto-EQ and to calculate sound prediction on listener areas. With the CMAP (mapping optimization mode), the vertical dispersion can be adjusted and optimized according to the listener area.

The X606 CARDIOID is a self-powered 3-channel high-end cardioid subwoofer, which features 6 x 6.5" ported woofers and unique software controllable cardioid radiation pattern. The power output of 1200 W (RMS) ensures for very high SPL down to a frequency of 75 Hz. The cardioid disperson avoids unwanted energy behind the system and reduces the reveberant field at low frequencies while providing highest accuracy in low frequency sound emission. The combination of mapping optimization and direct cardioid radition pattern definition is the most comprehensive and powerful loudspeaker management system on the market. It is seamlessly constructed into the software, cabling and connection concept. The cabinet can be used as a cardioid extension or normal LF extension for the X606. It shares the same outer dimensions and flyware and can be flown together with the X606 as one line like conventional LF extensions or flown behind the X606 with the cardoid flying frame to set up a beamforming cardoid line array system. Due to the fully integrated connection hardware, the subwoofer can be stacked to realize larger systems with up to 10 meters of acoustic length. Internally, one X606 CARDIOID has 6 amplifier and 6 DSP channels. The CADAC DSP-core module platform is integrated with the amplifier section into the loudspeaker. Cabinets are electrically connected by the CADAC C-Link audio and command interface. The CCP control and prediction software can connect to the array via LAN for command and control, Auto-EQ and to calculate sound prediction on listener areas. With the CMAP (mapping optimization mode), the vertical dispersion can be adjusted and optimized according to the listener area.

The X606 beam forming array module combines a comprehensive package in all relevant disciplines without compromise. With the X606, even at most demanding and complex sound installations can be realized. The combination of mapping optimization and direct array definition is the most comprehensive and powerful loudspeaker management system on the market. The X606 is a self-powered 3-
way high-end beam forming array loudspeaker, which features 6 x 6.5" ported woofers for LF, 12 x 3.5" woofers for the MF and 24 x 1" dome tweeters for the HF. The X606 can be used as single cabinet with programmable vertical dispersion (point source functionality) and as beamforming array for fixed installation as well as for mobile applications. If one X606 is combined with one X606-CARDIOD cabinet, the system will have cardioid dispersion for the LF range. The array is used as straight line in most applications as the coverage on listener areas is adjusted by beamforming. Due to the fully integrated connection hardware, the column can be stacked to realize larger systems with up to 10 meters of acoustic length. With the small source distances, the beamforming capabilities of the column are excellent even at very high frequencies. Internally, one X606 has 42 amplifier and 42 DSP channels. The CADAC DSP-core module platform is integrated with the amplifier section into the loudspeaker. Cabinets are electrically connected by the CADAC C-Link audio and command interface. The CCP control and prediction software can connect to the array via LAN for command and control, Auto-EQ and to calculate sound prediction on listener areas. With the CMAP (mapping optimization mode), the vertical dispersion can be adjusted and optimized according to the listener area.

The CP124 beam forming array module with internal passive crossovers between LF and HF way. It is intended as basic beamforming column loudspeaker for the CADAC product range. The combination of mapping optimization and direct array definition is the most comprehensive and powerful loudspeaker management system on the market. The CP124 is a self-powered 2-way high-end beam forming array loudspeaker, which features 12 x 4" wideband woofers and 12 passive crossovers, for 36 x 1" dome tweeters. Due to the fully integrated connection hardware, the column can be stacked to realize larger systems with up to 14 meters of acoustic length. Internally, one CP124 has 12 amplifier and 12 DSP channels. The CADAC DSP-core module platform is integrated with the amplifier section into the loudspeaker. Cabinets are electrically connected by the CADAC C-Link audio and command interface. The CCP control and prediction software can connect to the array via LAN for command and control, Auto-EQ and to calculate sound prediction on listener areas. With the CMAP (mapping optimization mode), the vertical dispersion can be adjusted and optimized according to the listener area.

The CA124 beam forming array module combines a comprehensive package in all relevant disciplines without compromise. With the CA124, even at most demanding and complex sound installations can be realized. The combination of mapping optimization and direct array definition is the most comprehensive and powerful loudspeaker management system on the market. The CA124 is a selfpowered 2-way high-end beam forming array loudspeaker, which features 12 x 4" wideband woofers and 36 x 1" dome tweeters. Due to the fully integrated connection hardware, the column can be stacked to realize larger systems with up to 14 meters of acoustic length. With the small source distances, the beamforming capabilities of the column are excellent even at very high frequencies. Internally, one CA124 has 48 amplifier and 48 DSP channels. The CADAC DSP-core module platform is integrated with the amplifier section into the loudspeaker. Cabinets are electrically connected by the CADAC C-Link audio and command interface. The CCP control and prediction software can connect to the array via LAN for command and control, Auto-EQ and to calculate sound prediction on listener areas. With the CMAP (mapping optimization mode), the vertical dispersion can be adjusted and optimized according to the listener area.

The S218 is a self-powered high-end subwoofer, which features 2 x 18" ported woofers. The power output of 4000 W (RMS) ensures for © very high SPL down to a frequency of 35 Hz. It can be combined with all products of the CADAC range and be used as subwoofer extension in ground stack configuration for point sources or line arrays and can be also used as ground stack horizontal subwoofer array. The DSP-electronic has 2 power amplifiers and 2 DSP channels. Internally, one S218 has 2 amplifier and 2 DSP channels. The CADAC DSP-core module platform is integrated with the amplifier section into the loudspeaker. Cabinets are electrically connected by the CADAC C-Link audio and command interface. The CCP control and prediction software can connect to the array via LAN for command and control, Auto-EQ and to calculate sound prediction on listener areas. With the CMAP (mapping optimization mode), the dispersion can be adjusted and optimized according to the listener area for the application of subwoofer arrays. CMAP enables to create arbitrary radiation patterns for the listener area with ground stack horizontal arrays.

The S215 is a self-powered high-end subwoofer, which features 2 x 15" ported woofers. The power output of 4000 W (RMS) ensures for © very high SPL down to a frequency of 40 Hz. It can be combined with all products of the CADAC range and be used as subwoofer extension in ground stack configuration for point sources or line arrays and can be also used as ground stack horizontal subwoofer array. The DSP-electronic has 2 power amplifiers and 2 DSP channels. Internally, one S215 has 2 amplifier and 2 DSP channels. The CADAC DSP-core module platform is integrated with the amplifier section into the loudspeaker. Cabinets are electrically connected by the CADAC C-Link audio and command interface. The CCP control and prediction software can connect to the array via LAN for command and control, Auto-EQ and to calculate sound prediction on listener areas. With the CMAP (mapping optimization mode), the dispersion can be adjusted and optimized according to the listener area for the application of subwoofer arrays. CMAP enables to create arbitrary radiation patterns for the listener area with ground stack horizontal arrays.

The CDC MC Dante V2 is a 1U Dante to MegaCOMMS audio network bridge enabling Dante units to be incorporated within a MegaCOMMS audio network. The unit now features A and B Dante ethernet ports with redundancy. It can operate at either 96 kHz or 48 kHz and can handle up to 64 inputs and outputs. The CDC MC Dante V2 is a 1U Dante to MegaCOMMS audio network bridge enabling Dante units to be incorporated within a MegaCOMMS audio network. The unit now features A and B Dante ethernet ports with redundancy. It can operate at either 96 kHz or 48 kHz and can handle up to 64 inputs and outputs. The MC Dante also has on-board sample rate conversion for all 128 channels, as well as its own independent word clock with audio connections via co-axial. Dual PSUs come as standard to ensure secure performance in critical network applications. As with the CDC MC MADI unit, the co-axial ports glow either red or blue for Rx (receive) or Tx (transmit) – enabling fast and accurate configuring of the MegaCOMMS network especially in low light.