Cart
← Back to Product Catalog

xIO XLR 1×1

I/O Interfaces

Learn more

Similar Products
  • Neutrik

NA-2O-DLINE

Connect your legacy audio gear to the DANTE® world. The Line I/O to DANTE® Interface is an end-of-network device. It is a breakout box which allows two channels of audio to be integrated into a DANTE® network.

    I/O Interfaces
  • Dante Ch: 2x0
  • 16-bit, 24-bit, 32-bit
See the product
bose-controlspace_EP22-D_1200px|bose-controlspace_EP22-D_1200px
  • Bose Professional

Bose – ControlSpace EP22-D

The Bose® ControlSpace® EP22-D Dante endpoint is a convenient and cost-effective 2-in/2-out analog audio interface. The small form factor with PoE make it easy to locate close to analog devices, helping to reduce costly and interference-prone analog wiring. The ControlSpace EP22-D Dante endpoint is a 2in/2out, convenient and cost-effective way to add mic/line audio input and output channels to a Dante-based networked audio system. The small form factor of the EP22-D and PoE power capability make it easy to put Dante connectivity wherever it’s needed—near the audio source or sink—thereby eliminating costly and interference-prone analog wiring. Setup and control, including like mic/line input gain, output gain and phantom power, as well as Dante audio routing are all integrated in ControlSpace Designer™ software.
    I/O Interfaces
  • Dante Ch: 2x2
  • 24-bit
See the product
1569527185_1507920
  • Muxlab

Muxlab – HDMI/Dante over IP PoE Transmitter

The HDMI/Dante over IP PoE Transmitter, UHD-4K allows HDMI video equipment supporting up to 4K @ 30Hz (4:4:4) and 4K @ 60Hz (4:2:0), plus Dante audio equipment to be connected and extended to create an independently distributed audio and video network.  The HDMI/Dante over IP PoE Transmitter, UHD-4K allows HDMI video equipment supporting up to 4K @ 30Hz (4:4:4) and 4K @ 60Hz (4:2:0), plus Dante audio equipment to be connected and extended to create an independently distributed audio and video network. 100’s of Single Displays and Video Wall Displays of user configurable size (X by Y) may be supported, depending on network bandwidth. Audio can be independently distributed to 100’s of Dante supported audio devices. Supports HDR at up to 4K @ 30Hz (4:2:2). The unit can be connected via Cat5e/6 cable up to 330ft (100m) from an Ethernet Switch, and supports PoE (PD) when powered by a PoE (PSE) Ethernet Switch. An IR Emitter or IR Sensor, if required, may be purchased separately for IR based remote control applications.
    I/O Interfaces
See the product