Cart
← Back to Product Catalog

Muxlab – HDMI/Dante over IP PoE Transmitter

I/O Interfaces

More details

Similar Products

monisms-MNS-AMPMC3011A-2P
  • MONISMS

MONISMS – MNS-AMPMC30XXA-2P

The POE DANTE/AES67 Audio Amplifier Modules MNS-AMPMC30XXA-2P, Built-in to your 4-8 ohm speaker, that instantly Dante-enables your speakers.
Dante Audio Amplifier module that drives small 4-8Ω speakers.
The MONISMS Dante Amplifier Modules Power 30W, 4-8Ω load.
The module's audio input is via an Ethernet audio network.
MNS-AMPMC30XXA-2P is powered by standard POE+ and has a MAX power of 30 watts. If there is not POE+ used, It can used the external 19VDC power supply.

[Model:MNS-AMPMC3011A-2P] 1 Channel, 30W Output, [1 Pair Speaker Terminals].
[Model:MNS-AMPMC3012A-2P] 1 Channel, 2*15W Output, [2 Pairs Speaker Terminals].
[Model:MNS-AMPMC3022A-2P] 2 Channels, 2*15W Output, [2 Pairs Speaker Terminals].

    I/O Interfaces
See the product
ru-nl2p_400px
  • RDL

RDL – RU-NL2P

The RU-NL2 is a high quality Dante network to line level interface. The RU-NL2 converts two Dante network audio channels to +4 dBu balanced line level that corresponds to a network digital audio level of -18 dBFS. LED audio signal indicators are provided. Model RU- NL2P operates from PoE. The RU-NL2 is a high quality Dante network to line level interface. The RU-NL2 converts two Dante network audio channels to +4 dBu balanced professional line level. The front panel features signal LEDs that indicate audio presence for each of the received network signal channels. Balanced +4 dBu audio levels correspond to a network digital audio level of -18 dBFS. The noise floor is better than 80 dB below operating level. Crosstalk is below the noise floor between the outputs across the entire audio spectrum. The RU-NL2 is also available in a PoE version (RU-NL2P). If PoE power and an external 24 Vdc supply are both feeding an RU-NL2P, the unit will run from the external supply and will seamlessly switch over to PoE power upon loss of the external supply. 
    I/O Interfaces
See the product
bose-controlspace-EP40-D_1200px|bose-controlspace-EP40-D_1200px
  • Bose Professional

Bose – ControlSpace EP40-D

The Bose® ControlSpace® EP40-D 4-input Dante endpoint adds 4 mic/line inputs to a Dante-based network audio system. Front-panel indicators show channel gain/pad and phantom power status for easy troubleshooting.  The ControlSpace EP40-D 4 input Dante endpoint is the ideal interface for adding mic/line inputs to a Dante system. The small form factor of the EP40-D allows it to be mounted almost anywhere, putting it close to audio sources and minimizing interference-prone analog wiring. The EP40-D features four balanced mic/line inputs, each with software selectable +48V phantom power and 8 gain levels. Front panel indicators show each channel’s gain and phantom power status for easy troubleshooting. The EP40-D has two network connections to allow Dante daisy chaining. Dante daisy-chaining further simplifies system infrastructure wiring by allowing multiple EP40-Ds to use a single CAT-5 home run connection to a network switch. Power can also be daisy chained. The EP40-D is powered by either an external +24VDC supply or any PoE network switch. Setup and control, including like mic/line input 
    I/O Interfaces
See the product