Cart
← Back to Product Catalog

NA-2O-DLINE

I/O Interfaces

Learn more

Similar Products

Dante官网logo
  • BARE

BARE – D-10

Features： 1. A distributor connecting the host and the generator unit; 2. Provide 4 RJ45 wires, 2 of which are used for manual connection between junction boxes, and 2 are used to connect the transmitter unit; 3. Hand-pull connection method, with 2 CAT6 and over Category 6 wires; 4. Each junction box can be connected to 2 transmitter units; 5. The sending unit connected to the unit with chairperson is the chairperson unit, and the others are the representative units.
    I/O Interfaces
See the product
AudioScience - Iyo Dante
  • AudioScience

AudioScience – Iyo Dante 0.32LR

The Iyo Dante® is a cost-effective family of microphone/line Dante audio-over-IP (AoIP) interfaces in a 1U rack mount format. The 0.32LR provides 32 balanced outputs. the output levels are configurable up to +24dBu. With RJ-45/StudioHub + GPIO Connector close-up.

RGB LEDs on the Iyo’s front panel show per channel audio levels and streaming status.

The Iyo family feature an embedded web server, allowing configuration and monitoring of input and output levels. Routing is achieved using the Dante Controller.

Power is provided from a built-in universal AC power supply. Redundant power is available using an external 12VDC supply via a locking 2.1mm jack.

    I/O Interfaces
  • Dante Ch: 32x0
  • 16-bit, 24-bit, 32-bit
See the product
ru-nl2p_400px
  • RDL

RDL – RU-NL2P

The RU-NL2 is a high quality Dante network to line level interface. The RU-NL2 converts two Dante network audio channels to +4 dBu balanced line level that corresponds to a network digital audio level of -18 dBFS. LED audio signal indicators are provided. Model RU- NL2P operates from PoE. The RU-NL2 is a high quality Dante network to line level interface. The RU-NL2 converts two Dante network audio channels to +4 dBu balanced professional line level. The front panel features signal LEDs that indicate audio presence for each of the received network signal channels. Balanced +4 dBu audio levels correspond to a network digital audio level of -18 dBFS. The noise floor is better than 80 dB below operating level. Crosstalk is below the noise floor between the outputs across the entire audio spectrum. The RU-NL2 is also available in a PoE version (RU-NL2P). If PoE power and an external 24 Vdc supply are both feeding an RU-NL2P, the unit will run from the external supply and will seamlessly switch over to PoE power upon loss of the external supply. 
    I/O Interfaces
See the product