Kingray - MDT22-E1

Kingray – MDT22-E1

More details

Product Information

▲ 2 audio (digital signal) inputs, 2 audio (digital signal) outputs, external GPIO

▲ ARM processor cooperates with embedded operating system to expand Cirrus Logic Audio Codec

▲ 24-bit, Σ- △ AD / DA, 44.1kHz, 48kHz, 88.2kHz, 96kHz sampling rates are optional,

▲ I2S digital audio format

▲ Freely set the sampling rate and equipment name

▲ Network audio transmission and control use standard Category 5 network cable (CAT5)

▲ Supports PCM16, PCM24, and PCM32 encodings, and can also use custom encoding formats

Midas – DN32 Dante

The DN32-DANTE expansion card provides up to 32 channels of bidirectional, networked audio to your MIDAS M32 or BEHRINGER X32 mixing console for seamless integration with Dante enabled IP networks. The DN32-DANTE expansion card provides up to 32 channels of bidirectional, networked audio to your MIDAS M32 or BEHRINGER X32 mixing console for seamless integration with Dante enabled IP networks. Based on information technology standards, Dante provides uncompressed, multichannel digital media networking, with low latency and synchronisation. By focusing on flexible interoperability on an existing IP network infrastructure, Dante has been widely accepted and adopted by many pro audio manufacturers.

Dante Interface Cards

Dante Ch: 32x32
24-bit

See the product

K-array

K-array – K-dante

The K-dante accessory features two RJ45 ethernet connectors, that allow to connect many devices together in the same network without the need of any external ethernet switches. The K-dante accessory features two RJ45 ethernet connectors, that allow to connect many devices together in the same network without the need of any external ethernet switches. One cable does it all. A single CAT-5e or CAT-6 can carry both the audio signal (two-channel AES/EBU) and the data to manage all the devices in the network with the K-framwork software. Dante is an uncompressed, multi-channel networking technology that allows to transmit digital audio and data across standard IP networks.

Dante Interface Cards

Dante Ch: 2x0
48kHz-96kHz

See the product

Allen & Heath

Allen & Heath – SQ Dante V2 Card

SQ Dante V2 provides any SQ mixer or AHM processor with a full 64x64 channel, 96kHz or 48kHz interface to a Dante network. An SQ fitted with the Dante option card can seamlessly connect to amplifiers, preamps and other devices on the Dante network.The SQ Dante V2 card can be switched between 96kHz or 48kHz to accommodate Dante networks running at either sample rate. In addition to facilitating system integration, the card also enables digital splits and affordable multitrack recording direct to a computer.

Dante Interface Cards

Dante Ch: 64x64
24-bit

See the product

Kingray – MDT22-E1

Product Information

Similar Products

Midas – DN32 Dante

K-array – K-dante

Allen & Heath – SQ Dante V2 Card

Stay connected to Dante

Support

Company

Dante Networking Alliance