DiGiCo – SD10


More details

Similar Products

Helix-TV-front-cutout
  • Logitek

Logitek – Helix TV

  • 7″ touchscreens integrated into each module
  • 6 to 36 motorized faders (in increments of 6)
  • Monitor module with 4 sub-master faders, 4 aux busses, monitor controls
  • 2 master mix busses (one is 5.1/stereo, one is stereo only)
  • Frame delay, EQ, dynamics at every fader
  • 24 mix minus buses
  • Interfaces to popular automation/workflow systems such as Ross OverDrive, Sony ELC, Vizrt Mosart
  • Supports AES-67, RAVENNA, and Dante with the JetStream Plus with NET-67 Audio Engine
    Mixers
Soundcraft_Si_Performer_2_Front|Soundcraft_Si_Performer_2_Front
  • Soundcraft

Soundcraft – Si Performer 2

The Si Performer delivers the equivalent of 448 rack units of DSP including sophisticated 4-band fully parametric EQ, full dynamics processing, a comprehensive range of output options, totally flexible routing and, as with all Soundcraft consoles, an unmatched range of options to fully integrate the Si Performer into an existing system or become the centre of a thriving new installation. The Si Performer 2 features 24 local recallable mic pre amps and 8 stereo inputs along with two ViSi Connect™ option card slots with an additional 128x96 input/output paths (one 64x64 expansion slot and another 64x32 expansion slot).
    Mixers
arrakis-systems-darc-virtual-console
  • Arrakis Systems

Arrakis Systems – DARC Virtual Console

Audio over IP does not need to be complicated or expensive. With the DARC Virtual Console, you can control any Dante network audio source. Mix, adjust levels, everything you need for an On-Air or production room console. Audio over IP does not need to be complicated or expensive. With the DARC Virtual Console, you can control any Dante network audio source. Mix, adjust levels, everything you need for an On-Air or production room console. The DARC Virtual Console can be ran as a stand alone unit, or in conjunction with an AoIP network with multiple studios. It will control any Dante enabled audio device on your LAN, whether it is a source connected to our Simple IP units, or any Dante device such as the Dante AVIO. As a standalone unit, you don't need a large AoIP network to utilize this brilliant board. Simply connect all your audio sources into one of our Simple IP boxes (or any Dante enabled device), then connect the Dante Virtual software onto the same network. Utilizing the Dante Controller software, you choose which sources to control, and away you go. Since DARC controls any Dante audio source, you can configure DARC to control any audio source on your LAN. This allows you to make your setup as large and complex as your studios require. Which also allows you to expand your operations in the future.  
    Mixers