Cart
← Back to Product Catalog

Dante 2CH Analog XLR Input Adapter

I/O Interfaces

Learn more

Similar Products

musicrown-DF1208MN_1200px|musicrown-DF1208MN_1200px
  • Musicrown

Musicrown – DF1208MN

32 bit SHARC DSP, 96kHz sampling rate, 24 bit AD/DA convert.14x12 channels whole sound mixing matrix design, including 8 local analog input channels, 8 local analog output channels, 4 Dante network input channels and 4 Dante network output channels, 1 AUX internal sound mixing channel, 1 double effector internal marshaling channel. 32 bit SHARC DSP, 96kHz sampling rate, 24 bit AD/DA convert.14x12 channels whole sound mixing matrix design, including 8 local analog input channels, 8 local analog output channels, 4 Dante network input channels and 4 Dante network output channels, 1 AUX internal sound mixing channel, 1 double effector internal marshaling channel. Fully supports scalable DANTE digital network audio card and AEC automatic echo noise cancellation card, the users can freely configure and choose according to their requirements. Dante digital network audio card configuration is a double standard network interface, which fully supports the function of unite switching and hot backup, hardware system can distinguish automatically, can use immediately when it inserts. Software internal and local analog signal can realize fully sound mixing matrix processing. Each channel has independent DSP processing function.
    I/O Interfaces
See the product
ru-bnfp_400px|ru-bnfp_400px
  • RDL

RDL – RU-BNFP

The RU-BNF is a high quality bi-directional interface that converts three Dante channels to RDL Format-A and one Dante channel to balanced AUX output. It also converts three Format-A pairs and one AUX input to Dante channels. The RU-BNF is compatible with Format-A twisted-pair end-points. Model RU-BNFP operates from PoE. The RU-BNF is a high quality bi-directional interface that converts three Dante channels to RDL Format-A and one Dante channel to a balanced AUX output. It also converts three Format-A pairs and one AUX input to Dante channels. The RU-BNF is compatible with RDL Format-A twisted-pair end-point products. RDL’s Format-A system utilizes the 4 pairs of a standard CATx cable; 3 pairs (pairs A, B and C) are designated for sending and receiving audio and the fourth pair is used to distribute 24 Vdc to connected Format-A products.  The RU-BNF provides signal presence metering and is equipped to power connected Format-A endpoints. The RU-BNF is also available in a PoE version (RU-BNFP). If PoE power and an external 24 Vdc supply are both feeding an RU-BNFP, the unit will run from the external supply and will seamlessly switch over to PoE power upon loss of the external supply.
    I/O Interfaces
See the product
extron-axi22at_0|extron-axi22at_0
  • Extron Electronics

Extron – AXI 22 AT

The Extron AXI 22 AT is a quarter rack width audio interface for integrating two mic/line sources onto a Dante™-enabled audio system. The Extron AXI 22 AT is a quarter rack width audio interface for integrating two mic/line sources onto a Dante™-enabled audio system. It features two mic or line inputs on a 3.5 mm captive screw connector, with switchable 48 volt phantom power. Input select, gain, and phantom power settings are controllable from the front panel, via DSP Configurator Software, or by SIS command. The AXI 22 AT also features two line level outputs for routing any two Dante channels from the network to the audio system. The AXI 22 AT interfaces with any Dante-equipped audio processor,  and can be powered through PoE.
    I/O Interfaces
  • Dante Ch: 2x2
  • 24-bit
See the product