Dante Pro 2CH USB I/O Adapter

Product Information

USB to Dante. Plug in. Play Anywhere. Experience flawless bi-directional conversion between two-channel USB audio and Dante 2CH digital audio. This versatile adapter is USB audio device class 1.0/2.0 compatible, supporting USB output up to 24bit/192KHz and input up to 24bit/96KHz. With Dante® audio sampling rates of 24bit at 44.1, 48, 88.2, and 96KHz, it delivers exceptional audio quality. The configurable Dante audio delay (1, 2, or 5 milliseconds) ensures precision in any setup. Power by PoE or USB-C, for maximum powering flexibility.

Specifications

Dante Ch: 2x2
Bit Depth: 16-bit, 24-bit
Sample Rate: 44.1kHz, 48kHz, 88.2kHz, 96kHz
AES67 Enabled

BARE – DR-1

Features: The D series converter box is compatible with all Dante interfaces and has all the features of Dante audio network. Each conversion box can provide high-fidelity sound quality restoration, ultra-low latency, and accurate synchronization of sampling rates across the entire network. Compact design, easy to use, plug and play; conversion between analog audio signals and Dante digital audio signals; expand audio and power through a network cable; fully support Dante software, easy to configure the network and audio routing; support PoE power supply, Built-in lightning and surge protection.

I/O Interfaces

See the product

Alfatron Electronics

ALF-DAO-2XLR

he ALF-DAO-2XLR Dante to 2channel analog output adapter is a complete high-performance Dante device with the automation and ease-of-use features that make Dante the world’s most popular audio networking solution. The ALF-DAO-2XLR Adapter is compatible with all Dante interfaces and provides all the features you would expect from a Dante audio network. It is capable of providing high-fidelity audio reproduction, ultra-low latency, and sample-accurate synchronization across the entire network. Features:

Seamlessly integrate Dante systems into traditional analog systems.
There is no need to discard familiar mixing consoles, wireless microphones, and other analog signal sources, or analog amplifiers. All you need is to incorporate them into your audio network via Dante I/O.
With 2 channels of analog output on XLR
POE(802.3af)

I/O Interfaces

Dante Ch: 2x2
24-bit

See the product

Bosch

Bosch – ARNI-S

Bosch's OMN-ARNIS ARNI-S is an OMNEO interface that provides better scalability through the use of either a DHCP server or DNS server, which extends the use of PTP over multiple subnets. The ARNI-S supports redundancy, and up to 450 OMNEO nodes in a single subnet network, or up to 450 OMNEO nodes in each subnet of a routed network when used in conjunction with an ARNI-E device.

I/O Interfaces

Dante Ch: 0x0

See the product

Dante Pro 2CH USB I/O Adapter

Product Information

Specifications

Similar Products

BARE – DR-1

ALF-DAO-2XLR

Bosch – ARNI-S

Stay connected to Dante

Support

Company

Dante Networking Alliance