Cart
← Back to Product Catalog

Voltera – D-4800-2M

Amplifiers

More Details

Similar Products

Duecanali6404DSP_gallery-cardL_front-1024x500
  • Powersoft

Powersoft – Duecanali 6404 DSP+D

The excellent sound quality and ample output power available from the latest member of the Duecanali range is thanks to Powersoft’s unique approach to Class D amplification, making it well-suited to serving as the main system in any venue where performance is priority.

A fully integrated, state-of-the- art DSP yields extensive system management functionality. In addition to sound shaping and limiter functions, the DSP hardware and ArmoníaPlus software enable compliance with the crucial requirements of sound systems for emergency purposes.

The Duecanali range is able to drive low impedance loads (2/4/8 Ohm) and 70V/100V distributed lines selectable per channel delivering a maximum output power per channel of: 1800 W at 8 Ω; 3200 W at 4 Ω; 4600 W at 2 Ω; 9200 W at 4 Ω bridged; 6400 W at 8 Ω bridged; 4000 W at 100 Volt and 3200 W 70 Volt.

The series is also versatile, providing status feedback via its front panel LED display or a connected PC running ArmoníaPlus software.

    Amplifiers
  • Dante Ch: 2x0
  • 24-bit
See the product
linea-research-48Mxx-dante
  • Linea Research

Linea Research – 48M03-Dante

The Linea Research 48M03-DANTE offers a unique combination of power and audio performance, combined with advanced DSP and network control. With all 8 channels driven the 48M03-Dante delivers 400W per channel into 2, 4 or 8 Ohms as well as 70 volt. The Linea Research 48M03-DANTE offers a unique combination of power and audio performance, combined with advanced DSP and network control. With all 8 channels driven the 48M03-Dante delivers 400W per channel into 2, 4 or 8 Ohms as well as 70 volt. Linea research 48M Series amplifiers offer 8-channels of sonically pure Class D amplification combined with 96kHz digital signal processing and networked control as standard. Highly efficient auto-sensing power supplies support operation from 85V to 240V.
    Amplifiers
  • Dante Ch: 8x8
  • 24-bit
See the product
LDIPA412T_1
  • Adam Hall Group

Adam Hall – LD Systems IPA412T

Good sound belongs everywhere - in the hotel lobby, in conference rooms, in schools and houses of worship. Demands are constantly increasing, not only in terms of quality, but also in terms of flexibility. Permanently installed and still flexible? This apparent contradiction can be resolved by the IPA Series DSP-based installation amplifiers.

The IPA 412 T is a professional, four-channel installation power amplifier with 4 x 120 watts. While the 70V/100V outputs are equipped with high quality toroidal core transformers, the low impedance 4-Ohm outputs are completely transformerless and guarantee the highest possible audio quality. The versatile DSP functions include, amongst others, a parametric EQ with matching speaker library, dynamic tools, a matrix mixer, priority source selection and delay.

Despite this range of functions, the IPA Series power amps are easy to operate. Important functions such as signal, limit, protection and bridge mode are easily visible via the LEDs on the front panel.

HPF/LPF presets can be enabled directly on the device via DIP switches The IPA 412 T is already equipped for remote control using future remote panels and paging microphones from LD Systems. The back-panel slot provides expansion card connectivity for additional future-proofing. The Ethernet card offers comprehensive configuration and management via software. The Ethernet+Dante card also offers Dante audio networking capabilities and connection to a wide range of Dante-enabled devices, in order to integrate the IPA 412 T into the Dante network and resolve more complex tasks.

Times are changing; rooms are redivided or rededicated, numbers of attendees increase or decrease based on unforeseen events, but with the IPA Series DSP-supported power amps, your installation is prepared for any situation. Scalability and future-proofing are the biggest advantages of the IPA Series. Its energy efficiency is also ideal thanks to the class-D technology and switchable auto standby.

The IPA 424 T variant with 4 x 240 watts is available for larger installations.

    Amplifiers
See the product