Cart
← Back to Product Catalog

Voltera – D-1200-4

Amplifiers

More Details

Similar Products

nXp-3.04-front
  • Ashly Audio

Ashly – nXp3.04d

The nXp3.04d is a 4 channel multi-mode amplifier capable of driving 2 Ohm loads at full power. The maximum rated output power is 3,000W per channel at Low Z, 2,450W per channel in 70V mode, and 1,250W in 100V mode. There is an automatic but defeatable sleep mode consuming <1W, and instant standby mode controlled by contact closure or software. A switch mode power supply auto-detects 120VAC or 240VAC mains, and a Neutrik® powerCON is used for the AC cord. Each channel has selectable output mode of Low Z, 70V, or 100V, an 80Hz high-pass filter, input limiter, and input gain settings of 26dB, 32dB, 38dB, or 1.4V. Each channel has remote DC level control. Input connectors are Neutrik® XLR/TRS combo jack and Euroblock, while output connectors are Neutrik® speakON. The unit has a front panel power switch and level controls that can be disabled. LEDs indicate Protect, Sleep, Disabled, Com, and Bridge mode status, as well as Temperature, Output Current, Output Signal, and Clipping/Mute status per channel. The unit has Ethernet control with a real-time clock for event scheduling. The unit has serial data remote control, aux preamp outputs, preset control, fault condition logic outputs, optional network audio and AES3 digital audio capability. The unit has 32-bit DSP processing at 48kHz or 96kHz sampling rate. DSP functions include swept load impedance, gain, dynamics including autoleveler and ambient noise compensation, equalization including graphic, parametric, feedback suppressor, and FIR filters, a matrix mixer including automixing, crossover, delay, and a signal generator. The amplifier has temperature dependent variable speed forced-air cooling.
    Amplifiers
See the product
ED-71_Front
  • Keiga

Keiga – ED-71

* Dante™ Ultimo insides with hi performance Class D Audio DSP Amplifier

* Built-in KAP™ (Keiga Audio Performance) software to configure audio DSP

* KAP™ provides “Find-me” ping signal for easy location identification

* KAP™ tools can save and load the speaker profiles saving installation time & efforts

* Audio DSP provides up to 5 sets of PEQ setting for each channel

* One RJ45 connection for the Dante™ audio signals and PoE power network

* ED-71 supports both IEEE 802.3af/at/bt Type 4 (PoE/PoE+/PoE++) and local DC-In

* Supports Dante™ Domain Manger and AES67 compliant

* Auto detect PoE++ (90W), PoE+ (30W) or PoE (15W) power levels

* Fully protection with OTP, OTP, OVP, Auto Recovery and Surge Protection

* 5 LED status display for PoE status and channel signal and peak.

    Amplifiers
  • Dante Ch: 2x0
  • 24-bit
See the product
C10-2_Front_Web
  • Ampetronic

Ampetronic – C10-2 Dante

The C10-2 Series hearing loop drivers from Ampetronic mark a substantial development in assistive listening technology. C-Series units feature digital signal processing and enable fast, accurate setup and adjustment via a very simple and easy to use user interface.
    Amplifiers
  • AES67 Enabled
See the product