Taiden – HCS-8600MIO/08D


More details

Similar Products

  • Blustream

Blustream – DA11ABL-WP-US

The DA11ABL-WP-US is a multi-input / output wall plate to convert Bluetooth and analog audio within a digital Dante® networked audio system. The DA11ABL-WP converts 2 x input channels of Bluetooth, or unbalanced audio to Dante® digital audio, and 2 x channels of Dante® audio to 2 x output channels of unbalanced audio. Software configuration for the DA11ABL-WP allows for the Bluetooth name to be amended as required where being deployed in multi-user spaces. The DA11ABL-WP is a plug & play device that is powered using PoE (Power over Ethernet), or via 12V power supply, offers support for AES67 RTP audio transport, and magnetic faceplate design allows for both UK & EU backbox compatibility. The DA11ABL-WP is the ideal BYOD interface to allow any Bluetooth device to stream audio wirelessly to a Dante® audio system.
    I/O Interfaces
  • Dante Ch: 2x2
  • 16-bit, 24-bit, 32-bit
equipson-dd2
  • WorkPro

WorkPro – DD2

DD2 devices are gateways used to convert DANTETM (Digital Audio Network Through Ethernet - developed by AUDINATE) protocol. These devices allow the extraction of analog audio signals from the DANTETM network as well as the introduction of analog channels within the same network.

DD2 is a device designed for use in installation, for which the analog inputs and outputs are made through Euroblock 3.5mm connectors.

It has balanced inputs and outputs to provide greater immunity to noise that interferes with audio signal lines.

    I/O Interfaces
  • Dante Ch: 2x2
  • 16-bit, 24-bit, 32-bit
DBB1212_low
  • AllDSP

AllDSP – DBB-1212

Stand alone 12 input 12 output Dante connection. Featuring four analog, four AES/EUB and four Dante inputs. With flexible routing to four analog, four AES/EUB and four Dante outputs, over an eight channel matrix (four in, four out). Ready to go with all the benefits of Dante like discovery, pass though generic routed networks etc. Indication of the signal present and peak on each input and output channel for each signal flow tracking. Balanced inputs and impedance matched output for balanced inputs in downstream devices. Dual Ethernet connections, control over OSX and iOS or windows XP, 7 and 8.

    I/O Interfaces