Cart
← Back to Product Catalog

Stewart Audio – CVA100-2

Amplifiers

More details

Similar Products

CS702D
  • LEA Professional

CS702D

The CONNECTSERIES 702D is a 2-channel amplifier with 700 watts per channel. As part of the Dante CONNECTSERIES, the world’s first Internet of Things- (IoT) enabled professional-grade amplifiers, perfectly suited for small to medium-scale installations. The 702D features direct HiZ (70V or 100V) or LoZ selectable by channel. With three ways to connect, you can engage the built-in Wi-Fi access point, connect to the venue’s Wi-Fi, or use the FAST Ethernet to connect to any local area network via Cat5 or Cat6 cable. Then there’s the Cloud…DANTE CONNECTSERIES is the first professional amplifier family to feature Cloud connectivity. Harness the power of the Cloud for remote control, monitoring, notifications, and more from any of your personal devices. Just connect your amp to a network and start commanding your systems.  Register for your free LEA Cloud account at leaprofessional.cloud The DANTE CONNECTSERIES also features analog inputs and Dante inputs and external I/O control for remote on/off and fault monitoring.
    Amplifiers
See the product
ED-22B_Front
  • Keiga

Keiga – ED-22

* ED-22, Maximum supports 11Wx2@8Ω or PBTL mode for 22W@4Ω

* Built in Audio DSP for Volume, PEQ, Filter and Input Gain controls

* Dante™ Receiver as the audio input

* 2 sets two pins Euro-block Speaker output

* Signal Noise Ratio: ~ 93 dB

* Crosstalk in stereo mode: ~ - 64 dB

* THD + N (full power): < 0.5%

* Measure size: 114 (W) x 93(D) x 38(H) mm and Weight: 250g.

    Amplifiers
  • Dante Ch: 2x0
  • 24-bit
See the product
CS704D
  • LEA Professional

CS704D

The CONNECTSERIES 704D is a 4-channel amplifier with 700 watts per channel. As part of the Dante CONNECTSERIES, the world’s first Internet of Things- (IoT) enabled professional-grade amplifiers, perfectly suited for small to medium-scale installations. The 704D features direct HiZ (70V or 100V) or LoZ selectable by channel. With three ways to connect, you can engage the built-in Wi-Fi access point, connect to the venue’s Wi-Fi, or use the FAST Ethernet to connect to any local area network via Cat5 or Cat6 cable. Then there’s the Cloud…DANTE CONNECTSERIES is the first professional amplifier family to feature Cloud connectivity. Harness the power of the Cloud for remote control, monitoring, notifications, and more from any of your personal devices. Just connect your amp to a network and start commanding your systems.  Register for your free LEA Cloud account at leaprofessional.cloud The DANTE CONNECTSERIES also features analog inputs and Dante inputs and external I/O control for remote on/off and fault monitoring.
    Amplifiers
See the product