Cart
← Back to Product Catalog

Soundcraft – SI Series Option Card

Dante Interface Cards

More details

Similar Products

musicrown-dms-dsp|musicrown-dms-dsp
  • Musicrown

Musicrown – DMS DSP

Musicrown's DMS DSP is a Dante interface card.  Musicrown's DMS DSP is a Dante interface card. 
  • 32 bit SHARC DSP processing, 48kHz sampling rate, 24 bit AD/DA convert.
  • 8X8 core matrix, support 4 input channels, 4 output channels, far-end support 4 channels digital input and 4 channels digital output.
  • Dante digital network port configuration is a double standard network interface, which fully supports the function of unite switching and hot backup. Digital audio channel can support 4IN/4OUT, using 24-bit precision and extremely low network latency.
  • DSP input channel including noise gate, gain, mute, phase, link adjustment.
  • DSP output channel including X-over, 7 band PEQ, Gain, mute, compressor/limiter, phase, delay and link adjustment.
  • All PEQ Gain, bandwidth, frequency continues adjustment. Type can be select by PEAK, H-SHELF, L-SHELF, LOW CUT, HIGH CUT, ALLPASS1, ALLPASS2.
  • All high cut, low-cut filter type can be select by Butterworth, Link witz-Riley, Bessel, slope can be chosen.
  • Noise gate's threshold, time, ratio can be adjustment for inputs, compressor, limiter, ratio, time can be adjustment for outputs.
  • Maximal delay time 680mS for all input/output channels.
  • Inside single generator(pink, white noise and 20~20K sine wave, amplitude adjustable).
  • Hardware with 4 channel I/O monitor, supporting temperature, level, fault data sampling.
  • 30 user presets, device and each preset can be save and recall alone. Password protection function for high level applications.
  • PC software support USB, network TCP IP, Dante port on-line, real-time display of automatically searched IP address, One-button linkage easy for user’s operation more convenient and swift.
  • Module power supply mode is DC9V-12V 1A.
  • Module size is 100mmx66mmx40mm.
DMS Series:
  • DMS 2.0 - 2 analog input, 2 Dante output
  • DMS 0.2 - 2 analog output, 2 Dante input
  • DMS 2.2 - 2 analog input/output, 2 Dante input/output
  • DMS 4.0 - 4 analog input, 4 Dante output
  • DMS 0.4 - 4 analog output, 4 Dante input
  • DMS 4.4 - 4 analog input/output, 4 Dante input/output
    Dante Interface Cards
See the product
Audac_-_ANI22|Audac_-_ANI22
  • AUDAC

Audac – ANI22

The ANI22 is a Dante audio network interface for installation into WaveDynamics™ series amplifiers with two input and two output channels. The installation of this optional module allows these amplifiers to be integrated into any DANTE enabled AV network and flawlessly transfer digital audio with any compatible product on the market, ranging from music sources to microphone systems, mixers, and many more. The ANI22 is a Dante audio network interface for installation into WaveDynamics™ series amplifiers with two input and two output channels. The installation of this optional module allows these amplifiers to be integrated into any DANTE enabled AV network and flawlessly transfer digital audio with any compatible product on the market, ranging from music sources to microphone systems, mixers, and many more. A truly plug & play solution is created when linking multiple DANTE enabled devices with each other on a standard IP network. It offers self-configuring solutions by using DHCP configuration, while the connection can be made to any existinig 100 Mbit or 1 Gbit network infrastructure. Bidirectional signal transmissions with a sampling frequency of 48 kHz and a bit depth of 24 bit are simultaneously possible on all in and output channels, while guaranteeing an incredibly low latency with a maximum up to 5 ms. (depending of the network occupation). The network connection is implemented using an Ethercon compatible connector, allowing connection using standard RJ45 or ruggedized Ethercon connections in professional applications. The ANI22 comes delivered as an installation kit, including all required accessories for integration into the amplifier chassis. Installation shall be performed by qualified technicians.
    Dante Interface Cards
See the product
williams-sound-hhs-dm32|williams-sound-hhs-dm32
  • Williams AV

Williams Sound – HHS DM32

This product has reached “end-of-life”. Optional conversion of Analog Server (HHS 108/116/124/132) to Dante™ 32 mono / 16 stereo inputs. Server unit must be returned to Williams Sound for conversion.  This product has reached “end-of-life”. Optional conversion of Analog Server (HHS 108/116/124/132) to Dante™ 32 mono / 16 stereo inputs. Server unit must be returned to Williams Sound for conversion. 
    Dante Interface Cards
See the product